Warianty tytułu
Otrzymywanie selenu ze szlamu anodowego
Języki publikacji
Abstrakty
Recent years there is a trend of use the new roasting method (deselenization) use of copper anode slime in the controlled gas atmosphere in the large world companies for anode slime treatment. The aim of this work is a possibility of complete selenium removal from anode slime by the use of new deselenization method, and production selenium powder of commercial quality, in the Anode Slime Treatment Plant Bor. The results of experimental investigations in the laboratory conditions give the optimum parameters of the analyzed of the deselenization method. Selenium dioxide gas is emitted during roasting process, which is reduced in the sulfuric acid solution, and as a result, the commercial quality selenium is obtained. The produced selenium has a form of technical quality powder, used in metallurgy.
W ostatnich latach występuje tendencja stosowania nowej metody prażenia szlamów anodowych w kontrolowanej atmosferze w wielu zakładach przerabiających ten materiał. Wyniki eksperymentalnych badań w warunkach laboratoryjnych pozwoliły określić optymalne parametry metody eliminacji selenu ze szlamów. Gazowy dwutlenek selenu emitowany w czasie procesu prażenia jest redukowany w roztworze kwasu siarkowego, w wyniku czego jest produkowany selen. Wytworzony proszek selenu spełnia warunki jakościowe i może być stosowany w metalurgii.
Czasopismo
Rocznik
Tom
Strony
613-615
Opis fizyczny
Bibliogr. 8 poz., rys., tab.
Twórcy
autor
- Copper Instutute Bor, Yugoslavia
autor
- Copper Instutute Bor, Yugoslavia
Bibliografia
- 1. Jovanović L, Avramović Lj. i dr.: Modernization of deselenization process in the Anodę Slime Treatment Plant Bor, Study, Bor, Yugoslavia, 1999, p. 39+54.
- 2. Hyvarinen O., Lindroos L, Yllo E.: JOM, July 1989, p. 42+43.
- 3. Epifakov V., MoSkova V.: ŻPH, 10,1985, p. 2350+2351.
- 4. Epifakov V., Źukova A., Mośkova V.: ŻPP, 1977, vol. 5, p. 986+990.
- 5. Hoffmann J.: JOM, July 1989, p. 32.
- 6. Hoffmann J.: JOM, July 1989, p. 33+38.
- 7. Avramović Lj., Jovanović L, Jonović R.: Copper, 2000, vol. 251, No. l,p. 67+74.
- 8. Avramović Lj., Jovanovit L, Jonović R., Stanković D.: European Congress and Exhibition on Powder Metallurgy, Nice, France, 2001.
Typ dokumentu
Bibliografia
Identyfikatory
Identyfikator YADDA
bwmeta1.element.baztech-article-BOS3-0011-0048