Effect of silicon additions and processing parameters on mechanical properties of iron-base PM materials.

• Autorzy: Mazurkiewicz, O. , Leżański, J. , Konstanty, J.
• Konferencja: AMT'98 XVth Physical Metallurgy and Materials Science Conference 'Advanced Materials & Technologies', 17-21 May, 1998, Kraków-Krynica, Poland
• Języki publikacji: EN

Abstrakty

EN

Results of investigation of silicon additions and processing parameters on mechanical properties and microstructure of the iron-base sintered materials are presented. Green density as well as as-sintered density, hardness, tensile strength, transverse rupture strength and impact toughness were measured. As-sintered microstructures were also examined. The results indicate marked effect of silicon additions, cold compacting pressure and sintering temperature on evaluated properties.

Słowa kluczowe

PL

metalurgia proszków; krzem; dodatki; materiały spiekane; własności mechaniczne; gęstość; twardość; wytrzymałość na rozciąganie; naprężenie nominalne; uderzenie; pomiar; mikrostruktura

EN

powder metallurgy; silicon; additions; iron-base materials; sintered materials; mechanical properties; density; hardness; tensile strength; rupture strength; impact; measurement; microstructure

• Czasopismo: Inżynieria Materiałowa
• Rocznik: 1998
• Tom: R. XIX, nr 4
• Strony: 1199-1202

Twórcy

autor

Mazurkiewicz, O.

autor

Leżański, J.

autor

Konstanty, J.

• University of Mining and Metallurgy, Faculty of Metallurgy and Material Science