Nowa wersja platformy, zawierająca wyłącznie zasoby pełnotekstowe, jest już dostępna.
Przejdź na https://bibliotekanauki.pl

PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
2006 | T. 27, z. 4 | 1493-1505
Tytuł artykułu

Mixing time in a stirred tank equipped with an eccentric impeller

Warianty tytułu
PL
Czas mieszania w mieszalniku zaopatrzonym w mieszadło umieszczone niecentrycznie
Języki publikacji
EN
Abstrakty
EN
The effects of the impeller eccentricity and pumping mode of an eccentric impeller on the mixing time in a stirred tank have been considered. Mixing time was measured by the thermal method. The effects of the position of the dosage point of the thermal tracer and physical properties of the liquid on the results of the measurements have also been analyzed.
PL
Przedstawiono wyniki badań czasu mieszania w zależności od niecentryczności mieszadła i kierunku pompowania płynu w mieszalniku. Czas mieszania mierzono metodą termiczną. Analizowano również wpływ położenia punktu dozowania trasera i właściwości fizycznych cieczy na wyniki pomiarów.
Słowa kluczowe
PL
EN
liquid   mixing  
Wydawca

Rocznik
Strony
1493-1505
Opis fizyczny
Bibliogr. 16 poz.,Rys., tab.,
Twórcy
autor
autor
  • Politechnika Szczecińska, Instytut Inżynierii Chemicznej i Procesów Ochrony Środowiska, al. Piastów 42, 71-065 Szczecin
Bibliografia
  • [1] STRĘK F., Agitation and Agitated Yessels (in Polish), WNT, Warsaw, 1981.
  • [2] RZYSKI E., Inż. Chem. Proc., 1980, l, 537.
  • [3] RIELLY C.D., PANDIT A.B., The mixing time ofNewtonian liguids with large density and viscosity difference in mechanically agitated contactors. Proc., 6th European Conf. on Mixing, Pavia, 24-26.05.1988,69-77.
  • [4] SMITHJ.M., SCHOENMAKERS A.W., Chem. Eng. Res. Des., 1988, 66, 16.
  • [5] BOUWMANS I., BAKKER A., VAN DEN AKKER H.E.A., Trans. IChemE, Part A, 1997, 75, 777.
  • [6] PATIL S.M., GOGATE P.R., PATWARDHAN A.W., PANDIT A.B., Mixing time studies in mechanically agitated contactor. Intern. Symp. on Mixing in Industrial Processes, ISMIP4, Toulouse, 14-16. 05. 2001.
  • [7] RIEGER F., RZYSKI E., Inż. Ap. Chem., 1998, 37, 13.
  • [8] WOZIWODZKI S., PhD Thesis, Poznań University of Technology, 2003.
  • [9] DYLAG M., BRAUERH., Yerfahrenstechnik, 1976, 10, 637.
  • [10] KARCZ J., SZOPLIK J., Chem. Pap.. 2004, 58, 9.
  • [11] SZOPLIK J., KARCZ J., Inż. Chem. roc., 2004, 25, 1663.
  • [12] SZOPLIK J., PhD Thesis, The studies of mixing time in a stirred tank with an eccentrically located impeller. Technical University of Szczecin, 2004.
  • [13] GOGATE P.R., PANDIT A.B., Can. J. Chem. Eng., 1999, 77, 988.
  • [14] PANDIT A.B., GOGATE P.R., DINDORE V.Y., Effect of tracer properties (volume, density and viscosity) on maing time in mechanically agitated contactors. Proc. lOth European Conf. on Mixing, Delft, 2000, 385.
  • [15] JONES P.N., OZCAN-TASKIN G.N., Blending liguids ofdifferent physical properties. Paper P39, llth European Conf. on Mixing, Bamberg, 2003, 549.
  • [16] JAWORSKI Z., DYSTER K.N., NIENOW A.W., Trans IChemE, 2001, 79 A, 887.
Typ dokumentu
Bibliografia
Identyfikatory
Identyfikator YADDA
bwmeta1.element.baztech-article-BGPK-1546-6031
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.