Analysis of power quality in high-tech facilities

• Autorzy: Moreno-Munoz, A. , Gonzalez, J. J.
• Języki publikacji: EN

Abstrakty

EN

Voltage and current were measured at various laboratories; it was found that the Key words: main problems for the equipment installed were voltage sags, harmonics and leakage currents The paper analyses the capabilities of modern power supplies; the convenience of "embedded , solution" is also discussed. Finally it is addressed the role of the Standards on the protection of electronic equipment and the implications for the final costumer.

Słowa kluczowe

EN

power quality survey; high-tech facilities; servicing sensitive; electronic equipment; EMC; power disturbances; power supply

• Czasopismo: Electrical Power Quality and Utilisation. Magazine
• Rocznik: 2005
• Tom: Vol. 1, nr 2
• Strony: 69-77
• Opis fizyczny: bibliogr. 25 poz.

Twórcy

autor

Moreno-Munoz, A.

autor

Gonzalez, J. J.

• Universidad de Cordoba, Spain,

Bibliografia

• 1. Moreno-Mufioz, M D. Redel: Calm in the campus: power disturbances threaten university life. IEE Power Engineer, Vol. 19, 4, August 2005, pp. 34-37.
• 2. Ward, D.J.: Power quality and the security of electricity supply. Proceedings of the IEEE, Vol. 89, Issue: 12, Dec. 2001, pp:1830-1836.
• 3. Pramod Parihar, Edwin Liu: Power quality services: technologies and strategies for energy providers in the deregulated market. The Electricity Journal, Vol. 12, ns 9, November 1999, pp. 79-84.
• 4. Burns R.E., Potter S., Witkind-Davis V.: After the lights went out. The Electricity Journal. Volume 17, Issue 1 , January-February 2004, Pages 11-15.
• 5. Heydt G.T.: Grand challenges in electric power engineering: extreme system reliability. Power Engineering Society Summer Meeting, IEEE, pp. 1695-1697,21-25 July 2002.
• 6. Field Handbook of Power quality analysis. Dranetz-BMI. 1998.
• 7. Cumbria N., Deregt M., Rao N.D.: Effects of power disturbances on sensitive loads. In Proc. of Canadian Conference on Electrical and Computer Engineering, 1999, pp. 1181-1186.
• 8. Koval D. 0.: Computer performance degradation due to their susceptibility to power supply disturbances. Industry Applications Society Annual Meeting, 1989, vol.2 pp. 1754-1760.
• 9. IEEE guide for servicing to equipment sensitive to momentary voltage disturbances. IEEE std. 1250, 1995.
• 10. IEEE recommended practice for monitoring elec-tric power quality. IEEE Std. 1159, 1995.
• 11. Michaels K.M.: Sensible approaches to diagnosing power quality problems. IEEE Trans. on I. A., vol.33, n. 4. 1997, pp. 1124-1130.
• 12. Martzloff F.D., Gruzs T.M.: Power qu-ality site surveys: facts, fiction, and fallacies. IEEE Trans. on I. A., vol.24, n. 6. 1988, pp. 1005-1018.
• 13. IEEE recommended practice for powering and grounding sensitive electronic equipment. IEEE Std. 1100-1992.
• 14. Information Technology Industry Council 1TIC Curve Application Note. http://vAvw.itic.org/iss_pol/ techdocs/curve.pdf.
• 15. Varian 1200 Liquid ChromatographerlMass Spectrometer Preinstallation Instructions. www.varia-ninc.com.
• 16. McGranagban M., Roettger B.: Economic evaluation of power quality. In: IEEE Power Engineering Review, Vol. 22, Issue: 2, 2002, pp. 8-12.
• 17. Standler R.B.: Protection of small compu-ters from disturbances on the mains. In IEEE lAS Conference. Vol.2, 1988, pp.1482-1487.
• 18. Stebbins W.L.: Power line disturbances: a userk perspective on the selection and application of mitigation equipment and techniques. IEEE Textile Industry Technical Conference, 1989, pp. 4/1-4/7.
• 19.Schenung S.: Overcoming Cost Reduction Barriers for Advanced Power Quality Mitigation Systems. EPRICSG, Palo Alto, CA. TP-114370. 1999.
• 20. http://www.cpccorp.com/tips.htm
• 21. Three Phase Power Source Overloading Caused by Small Computers and Electronic Office Equip-ment. ITI Information Letter. http://www.itic.org/ technical/3phase.htm.
• 22. Donmez Aiken, Stephens M., Tho-mas C., Banerjee B.: Embedded power qu-ality solutions for advanced machine tools. Power quality 2001 Conference. bttp://www.f47testing. com/cncpq/files/PQA2001paper.pdf.
• 23. Stephens M., Soward J., Johnson D., Ammenheuser J.: Power quality solu-tions for semiconductor tools, equipment design solutions. 2000, http//www.powerquality.com.
• 24. Annex B2, http//www.iee.org.uk/PAB/EMC/co-re.htm.
• 25. http://www.formfactors.org/.