Economic and technical analysis of cooling water control in large-power steam turbines

• Autorzy: Gardzielewicz, A. , Głuch, J. , Błaszczyk, A.
• Konferencja: International Symposium SYMKOM Compressor & Turbine Flow Systems, Treory & Application Areas (15-17.09.2008; Łódź; Polska)
• Języki publikacji: EN

Abstrakty

EN

The article presents the economic and technical analysis of the application of cooling water control in large-power steam turbines. The analysis was performed on selected designs of pumps used in 200 MW turbosets in operation in Polish power plants.

Słowa kluczowe

PL

zaawansowana konstrukcja; turbiny dużej mocy; pompy chłodzące

EN

cooling water pumps; large-power turbines; advanced design

• Czasopismo: Zeszyty Naukowe. Cieplne Maszyny Przepływowe - Turbomachinery / Politechnika Łódzka
• Rocznik: 2008
• Tom: nr 133
• Strony: 139--148
• Opis fizyczny: Bibliogr. 14 poz.

Twórcy

autor

Gardzielewicz, A.

• Institute of Fluid-Flow Machinery PAS,

autor

Głuch, J.

• Institute of Fluid-Flow Machinery PAS

autor

Błaszczyk, A.

• Technical University of Łódź, Poland,

Bibliografia

• [1] A.Sadowski; A. Łojek; M. Klein; J. Szerucki, 2000; Modernisation of cooling water pump control system in 500 MW turbosets in operation in the Kozienice power plant. Pumps and pumping, (in Polish)
• [2] J. Marczewski et al.: Modernisation of cooling water pumps control system in 200 MW turbosets in operation in the Polaniec power plant. Report of the Polaniec power plant, 2001-2003 (in Polish).
• [3] A. Błaszczyk; A. Popierski; J. Staniszewski; Modernisation of cooling water pumps 160 D30/ HP. Proc. of the 7th Scientific and Technical Conference, Słok 2005 (in Polish)
• [4] A. Błaszczyk; A. Popierski; A. Najdecki; J. Staniszewski; Modernisation of the hydraulic system of cooling water pumps 120D40. Proc of the 7th Scientific and Technical Conference, Słok 2007 (in Polish)
• [5] A. Łojek; Pre-rotational and bleeding control of impeller pumps. Ph.D. thesis, IF-FM, Gdańsk 1987 (in Polish)
• [6] A. Błaszczyk; J. Staniszewski; G. Kużba; D. Woźniak; Controlling the cooling water pumps 160D30. Proc of the 7th Scientific and Technical Conference, Słok 2007 (in Polish)
• [7] E. Bilkowski; R. Olszowiec; K. Szybalski; Production of electric energy in the Bełchatów power plant in the context of water pump operation in its technological systems. Proc. of the 10th Forum of Pump Users, Belchatów 2004 (in Polish).
• [8] J. Dzierzgowski; Technical analysis of designs of steam turbine condensers. Ph.D. thesis, Shipbuilding Faculty, Gdansk Univ. of Technology, Gdańsk 1990 (in Polish)
• [9] Collective work - Energopomiar Gliwice; Recommendations concerning operational control of steam turbine condensers. Publication of the Ministry of Mining and Power Engineering, Warszawa, Gliwice 1986 (in Polish)
• [10] A. Gardzilewicz, J. Głuch, M. Bogulicz, T. Jankowski, W. Uziębło; Code package DIAGAR for steam turbine thermal diagnostics calculations. DIAGNOSTYKA MASZYN, Rep., Gdańsk 1995-2001 (in Polish).
• [11] A. Gardzilewicz, J. Głuch, M. Bogulicz, R. Walkowiak, M. Najwer, J. Kiebdój; Experience in Application of thermal Diagnostics in the Turów Power Station. Proc. ASME IJPGC, Atlanta 2003
• [12] A. Gardzilewicz, S. Marcinkowski, B. Kurant; Thermal and Flow Investigations in LP of Turbine Blade System. Proc. Turbomachinery, Workshop, Gdańsk, 2006
• [13] J. Głuch. A. Gardzilewicz; The analysis of performance of the turbine condenser with prognosis of repair. Proc. ASME JPGC, Baltimore, 1998
• [14] W. Zembaty; Cooling systems and equipment in thermal power plants. WNT, Warszawa, 1993 (in Polish).