Microstructure evolution in warm forged sintered ultrahigh carbon steel

• Autorzy: Szczepanik, S. , Nikiel, P. , Mitchell, S. C. , Kawalla, R.
• Języki publikacji: EN

Abstrakty

EN

Fe–1.4C–0.65Si–0.85Mo ultrahigh carbon steel was liquid phase sintered in 10%H2–90%N2 at 1300 °C from Höganas Astaloy 85 Mo HP base iron, fine graphite and silicon carbide powders mixed with polypropylene glycol. The microstructure then comprised fine pearlite and grain boundary cementite networks and the density increased from ∼6.8 g cm−3 to ∼7.7 g cm−3. A group of specimens then underwent austenitisation, isothermal quenching/autotempering at M(10%) temperature, followed by cooling to room temperature. This produced a crack-free martensitic microstructure, which transformed to ferrite plus fine spheroidised carbides by annealing for 3 h at 750 °C. To attain full density and well-distributed submicron carbides, these specimens were warm forged at 700–750 °C. To ascertain if some processing steps can be discarded, as-sintered and quenched samples were similarly thermo-mechanically processed. The required stresses and resultant microstructures depended on temperature and strain rate, with optimum microstructure, for Bähr processing at 775 °C of quenched material, fully comparable with that of prior spheroidised specimens. Microstructures and hardness values are presented for all processing routes.

Słowa kluczowe

PL

stal węglowa; kucie; spiekanie

EN

spheroidised ultrahigh carbon steel; densification; liquid phase sintering; forging

• Czasopismo: Archives of Civil and Mechanical Engineering
• Rocznik: 2015
• Tom: Vol. 15, no. 2
• Strony: 301--307
• Opis fizyczny: Bibliogr. 13 poz., rys., wykr.

Twórcy

autor

Szczepanik, S.

• AGH - University of Science and Technology, Department of Metals Engineering and Industrial Computer Science, Krakow, Poland,

autor

Nikiel, P.

• AGH - University of Science and Technology, Department of Metals Engineering and Industrial Computer Science, Krakow, Poland

autor

Mitchell, S. C.

• University of Bradford, Engineering Materials Research Group, United Kingdom

autor

Kawalla, R.

• TU BA Freiberg, Metal Forming Institut, Freiberg, Germany

Bibliografia

• [1] O.D. Sherby, B. Walser, C.M. Young, E.M. Cady, Superplastic ultra-high carbon steels, Scripta Metallurgica 9 (1975) 569.
• [2] O.D. Sherby, M. Carsi, W.J. Kim, R.D. Lesuer, O.A. Ruano, C.K. Syn, E.M. Taleff, J. Wadsworth, Mechanical property - microstructure relations in iron-carbon alloys from 1.0 to 5.2% carbon, Materials Science Forum (2003) 26.
• [3] D.R. Lesuer, C.K. Syn, J.D. Whittenberger, O.D. Sherby, Microstructure-property relations in as-extruded ultrahigh-carbon steels, Metallurgical and Materials Transactions B 30 (1999) 1559.
• [4] C.K. Syn, D.R. Lesuer, O.D. Sherby, Influence of microstructure on tensile properties of spheroidized ultrahigh-carbon (1.8 Pct C) steel, Metallurgical and Materials Transactions A 25 (1994) 1481.
• [5] A.A.S. Abosbaia, Design and Processing of Low Alloy High Carbon Steels by Powder Metallurgy. Ph. D. thesis, University of Bradford, 2010.
• [6] A.A.S. Abosbaia, S.C. Mitchell, M. Youseffi, A.S. Wronski, Liquid phase sintering, heat treatment and properties of ultrahigh carbon steel, Powder Metallurgy 54 (5) (2011) 592.
• [7] S. Szczepanik, S.C. Mitchell, A.A.S. Abosbaia, A.S. Wronski, Warm forging of spheroidized ultrahigh carbon steel, Powder Metallurgy Progress 10 (1) (2010) 59.
• [8] D.R. Lesuer, C.K. Syn, A. Goldberg, J. Wadsworth, O.D. Sherby, The case for ultrahigh carbon steel as structural materials, The Journal of The Minerals, Metals & Materials Society 45 (8) (1993) 40.
• [9] T.G. Nieh, J. Wadsworth, O.D. Sherby, Superplasticity in Metals and Ceramics, Cambridge University Press, Cambridge, 1997.
• [10] H. Zhang, B. Bai, D. Raabe, Superplastic martensitic Mn–Si–Cr– C steel with 900% elongation, Acta Materialia 59 (2011) 5787.
• [11] S. Szczepanik, J. Sińczak, Determination of the conditions for heavy deformations of sintered steel containing 1.4%C, Metallurgy and Foundry Engineering 20 (4) (1994) 441.
• [12] D.R. Lesuer, C.K. Syn, O.D. Sherby, Ultrahigh carbon steel for automotive applications, Society of Automotive Engineers 105 (5) (1996) 384.
• [13] K. Tsuzaki, E. Sato, S. Furimoto, T. Furuhara, T. Maki, Formation of on (a + u) Microduplex Structure Without Thermomechanical Processing In Superplastic Ultrahigh Carbon Steel, Scripta Materialia 40 (1999) 675.

Identyfikatory

DOI

10.1016/j.acme.2014.12.008