Torque ripple minimization in bldc motor using dc-dc sepic converter

• Autorzy: Kumar, C. S. , Kumar, N. S. , Radhika, P.

Warianty tytułu

PL

Minimalizacja tętnień momentu w silniku bezszczotkowym przy wykorzystaniu przekształtnika dc typu SEPIC

• Języki publikacji: EN

Abstrakty

EN

Torque ripple in Brushless dc motors is generally undesirable. Torque ripple causes increased acoustic noise and undesirable speed ripple preventing BLDC motor from achieving high performance. This article presents the method of reducing torque ripple in BLDC motor. This study presents an approach to reduce torque ripples by controlling the voltage while maintaining speed. To get the desired dc link voltage, a singleended primary inductor converter (SEPIC) circuit is used to control the input of the commutation circuit.

PL

W artykule analizuje się możliwości minimalizacji zafalowań momentu napędowego w silniku bezszczotkowym. Zmniejszenie tętnień uzyskuje się przez sterowanie napięcia utrzymującego prędkość. W celu utrzymania pożądanego napięcia dc wykorzystano niesymetryczny przekształtnik typu DSEPIC.

Słowa kluczowe

PL

silnik bezszczotkowy; moment napędowy; zafalowania momentu

EN

brushless DC motor; commutation; torque ripple

• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2014
• Tom: R. 90, nr 9
• Strony: 146-150
• Opis fizyczny: Bibliogr. 10 poz., rys., tab., wykr.

Twórcy

autor

Kumar, C. S.

• Department of Electrical and Electronics Engineering, P.S.R.Engineering College,Sivakasi-626140,Tamilnadu,India,

autor

Kumar, N. S.

• Department of Electrical and Electronics Engineering, Mepco Schlenk Engineering College,Sivakasi-626005,Tamilnadu,India,

autor

Radhika, P.

• Department of Electrical and Electronics Engineering, Mepco Schlenk Engineering College,Sivakasi-626005,Tamilnadu,India,

Bibliografia

• [1] Tingna Shi, Yuntao Guo, Peng Song, and Changliang Xia,” A New Approach of Minimizing Commutation Torque Ripple for Brushless DC Motor Based on DC–DC Converter,” IEEE Trans. Ind. Electron.,Oct( 2010), Vol. 57, No. 10, 3483–3490
• [2] Sathyan A., Milivojevic N., Lee Y-J., Krishnamurthy M., and Emadi A.,“An FPGA-based novel digital PWM control scheme for BLDC motor drives,” IEEE Trans. Ind. Electron.,Aug(2009) Vol. 56, No. 8, 3040–3049
• [3] Nam K.-Y.,Lee W.-T, Lee C.-M., and Hong J.-P., “Reducing torque ripple of brushless DC motor by varying input voltage,” IEEE Trans. Magn., Apr(2006) Vol. 42, No. 4,1307–1310
• [4] Lu H.F., Zhang L., and Qu W.L., “A new torque control method for torque ripple minimization of BLDC motor with unideal back EMF,”IEEE Trans. Power Electron.,Mar(2008) Vol. 23, No. 2,950–958
• [5] Song J.-H., and Choy I., “Commutation torque ripple reduction in brushless dc motor drives using a single dc current sensor,” IEEE Trans. Power Electron.,Mar(2004) Vol.19, No.2,312–319
• [6] Veerachary M., “Power tracking for nonlinear PV sources with coupled inductor SEPIC converter,” IEEE Trans. Aerosp. Electron. Syst., Jul( 2005) Vol. 41, No. 3,1019–1029,
• [7] Liu Y., Zhu Z.Q., and Howe D., “Commutation torque ripple minimization in direct-torque-controlled PM brushless dc drives,” IEEE Trans. Ind.Electron.,Jul./Aug.(2007) vol. 43, No. 4,1012–1021
• [8] Su G.J., and Mckeever J.W., “Low-cost sensorless control of brushless DC motors with improved speed range,” IEEE Trans. Power Electron.,Mar(2004) Vol. 19, No. 2, 296–302
• [9] Rodriguez F., and Emadi A., “A novel digital control technique for brushless dc motor drives,” IEEE Trans. Ind. Electron., Oct(2007) Vol. 54, No. 5,2365–2373
• [10] Carlson R., Milchel L.-M., and Fagundes J.C., “Analysis of torque ripple due to phase commutation in brushless dc machines,” IEEE Trans. Ind. Appl.,May/Jun(1992) Vol. 28, No. 3,632–638