TWIP mechanism in processing of high-manganese austenitic steel

• Autorzy: Dobrzański, L. A. , Borek, W. , Mazurkiewicz, J.
• Języki publikacji: EN

Abstrakty

EN

Purpose: The aim of this paper is to determine the high-manganese austenite propensity to twinning induced by the cold working and its effect on structure and mechanical properties, and especially the strain energy per unit volume of new developed high-manganese Fe-Mn-(Al,Si) high-manganese austenitic TWIP (TWinning Induced Plasticity) steel containing about 25% Mn, 1% Si, 3% Al. Design/methodology/approach: The essence of the research concerns the analysis of the influence of microstructure evolution during cold plastic deformation. The microstructure of investigated steel was determined in metallographic investigations using light, scanning and high- resolution transmission electron microscopies (HRTEM). Findings: The activation of intensive mechanical twinning mechanisms in high-manganese austenitic steels, in order to increase strain energy, allows the formation of technological components of complex shape or permits the discharge of energy during cold plastic deformation. According to currently presented views, it is believed that the new austenitic steels with the A1 crystallographic structure containing Mn more than 25 mass.%, Si and Al can provide a significant advance, particularly in automotive applications, because practically there are no more possibilities to improve at the same time the strength and ductility of the steel with A2 crystallographic structure. Research limitations/implications: Results obtained in static conditions for new developed high-manganese austenitic steel indicate the possibility and purposefulness of their employment for constructional elements of vehicles, especially of the passenger cars to take advantage of the significant growth of their strain energy per unit volume which guarantee reserve of plasticity in the zones of controlled energy absorption during possible collision resulting from activation of twinning induced by cold working, which may lead to significant growth of the passive safety of these vehicles' passengers. Originality/value: TWIP steels show not only excellent strength, but also have excellent formability due to twinning, thereby leading to an excellent combination of strength, ductility, and formability over conventional dual-phase steels.

Słowa kluczowe

PL

stal wysokomanganowa; mechanizm TWIP; bliźniakowanie; bliźniaki; własności mechaniczne; struktura

EN

high manganese steels; TWIP mechanism; twinning; twins; mechanical properties; structure

• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2015
• Tom: Vol. 71, nr 1
• Strony: 22--27
• Opis fizyczny: Bibliogr. 17 poz., rys

Twórcy

autor

Dobrzański, L. A.

• Division of Materials Processing Technology, Management and Computer Techniques in Materials Science, Institute of Engineering Materials and Biomaterials, Konarskiego 18A, 44-100 Gliwice,

autor

Borek, W.

• Division of Materials Processing Technology, Management and Computer Techniques in Materials Science, Institute of Engineering Materials and Biomaterials, Konarskiego 18A, 44-100 Gliwice

autor

Mazurkiewicz, J.

• Division of Materials Processing Technology, Management and Computer Techniques in Materials Science, Institute of Engineering Materials and Biomaterials, Konarskiego 18A, 44-100 Gliwice

Bibliografia

• [1] G. Frommeyer, U. Brüx, K. Brokmeier, R. Rablbauer, Development, microstructure and properties of advanced high-strength and supraductile light-weight steels based on Fe-Mn-Al-Si-(C), Proceedings of the 6th International Conference on Processing and Manufacturing of Advanced Materials, Thermec’, 2009, 162.
• [2] G. Frommeyer, U. Brüx, P. Neumann,. Supra-ductile and high-strength manganese TRIP/TWIP steels for high energy absorption purposes, ISIJ International 43 (2003) 438-446.
• [3] O. Grässel, L. Krüger, G. Frommeyer, L.W. Meyer, High strength Fe-Mn-(Al, Si) TRIP/TWIP steels development - properties - application, International Journal of Plasticity 16 (2000) 1391-1409.
• [4] U. Brüx, G. Frommeyer, O. Grässel, L.W.Meyer, A. Weise, Development and characterization of high strength impact resistant Fe-Mn-(Al-, Si) TRIP/TWIP steels, Steel Research 73 (2002) 294-298.
• [5] L.A. Dobrzański, M. Krupiński, K.Labisz, B. Krupińska, A. Grajcar, Phases and structure characteristics of the near eutectic Al-Si-Cu alloy using derivative thermo analysis, Materials Science Forum 638-642 (2010) 475-480.
• [6] T. Tański, Characteristics of hard coatings on AZ61 magnesium alloys, Strojniski Vestnik-Journal of Mechanical Engineering 59/3 (2013) 165-174.
• [7] A. Grajcar, R. Kuziak, Softening kinetics in Nb-microalloyed TRIP steels with increased Mn content, Advanced Materials Research 314-316 (2011) 119-122.
• [8] M. Opiela, A. Grajcar, Hot deformation behavior and softening kinetics of Ti-V-B microalloyed steels, Archives of Civil and Mechanical Engineering 12/3 (2012) 327-333.
• [9] W. Ozgowicz, K. Labisz, Analysis of the state of the fine-dispersive precipitations in the structure of high strength steel Weldox 1300 by means of electron diffraction, Journal of Iron and Steel Research International 18/1 (2011) 135-142.
• [10] L.A. Dobrzański, A. Grajcar, W. Borek, Microstructure evolution of C-Mn-Si-Al-Nb high-manganese steel during the thermomechanical processing, Materials Science Forum 638 (2010) 3224-3229.
• [11] L.A. Dobrzański, W. Borek, Thermo-mechanical treatment of Fe-Mn-(Al, Si) TRIP/TWIP steels, Archives of Civil and Mechanical Engineering 12/3 (2012) 299-304.
• [12] L.A. Dobrzański, W. Borek, Hot-rolling of advanced high-manganese C-Mn-Si-Al steels, Materials Science Forum 706/709 (2012) 2053-2058.
• [13] L.A. Dobrzański, W. Borek, Hot-Working Behaviour of Advanced High-Manganese C-Mn-Si-Al Steels, Materials Science Forum 654-656 (2010) 266-269.
• [14] A. Grajcar, W. Borek, The thermo-mechanical processing of high-manganese austenitic TWIP-type steels, Archives of Civil and Mechanical Engineering 8/4 (2008) 29-38.
• [15] L.A. Dobrzański, M.Czaja, W. Borek, K. Labisz, T. Tański, Influence of hot-working conditions on a structure of X11MnSiAl17-1-3 steel, Advanced Materials Research 1036 (2014) 122-127.
• [16] L.A. Dobrzański, W. Borek, J. Mazurkiewicz, Mechanical properties of high-manganese austenitic TWIP-type steel, Materials Science Forum 783-786 (2014) 27-32.
• [17] L.A. Dobrzański, W. Borek, J. Mazurkiewicz, Structure and mechanical properties of high-manganese steels, Comprehensive Materials Processing 2 (2014) 199-218.