Thermal barrier coatings manufactured by suspension plasma spraying - a review

Łatka, L.

doi:10.1515/adms-2017-0044

Nowa wersja platformy, zawierająca wyłącznie zasoby pełnotekstowe, jest już dostępna.
Przejdź na https://bibliotekanauki.pl

Artykuł - szczegóły

Czasopismo

Advances in Materials Science

2018 | Vol. 18, nr 3(57) | 95--117

Tytuł artykułu

Thermal barrier coatings manufactured by suspension plasma spraying - a review

Autorzy

Łatka, L.

Wybrane pełne teksty z tego czasopisma

http://content.sciendo.com/view/journals/adms/adms-overview.xml

Warianty tytułu

Języki publikacji

Abstrakty

Thermal barrier coatings (TBC) is one of the most intensively studied of coatings’ applications area. From 1970’s TBC are developed in two independent ways: (i) development in new materials, with lower thermal conductivity, better erosion resistance and better thermal shock resistance or (ii) development in new deposition techniques. On this field besides conventional atmospheric plasma spraying (APS) and almost conventional (because of very common use) EB-PVD method, in the past 20 years two new techniques have been developed, namely suspension plasma spraying (SPS) and solution precursor plasma spraying (SPPS). In this paper only SPS method was described, as well as, new materials, which could be used in industrial applications of TBC. Moreover, the key issues, like suspension preparation, type of suspension injection, interaction between liquid droplets and plasma jet and deposition mechanism were described.

Słowa kluczowe

mikrostruktura mechanizm osadzania przewodność cieplna natryskiwanie plazmowe zawiesin powłoki termiczne

suspension plasma spraying thermal barrier coatings microstructure deposition mechanisms thermal conductivity

Wydawca

Czasopismo

Advances in Materials Science

Rocznik

2018

Tom

Vol. 18, nr 3(57)

Strony

95--117

Opis fizyczny

Bibliogr. 94 poz., rys., wykr., tab.

Twórcy

autor

Łatka, L.

Department of Materials Science, Strength and Welding, Mechanical Engineering Faculty, Wrocław University of Science and Technology, Wrocław, Poland, leszek.latka@pwr.edu.pl

Bibliografia

1. Greatrix D.R., Powered Flight, Springer, London, 2012.
2. Simoes-Moreira J.R., Fundamentals of thermodynamics applied to thermal power plants [in] Thermal power plant performance analysis, G.F.M. de Souza [ed.], Springer, London, 2012.
3. Padture N.P., Gell M., Jordan E.H., Thermal barrier coatings for gas-turbine engine applications, Science 296 (2002) 280-284.
4. Krause A.R., Garces H.F., Dwidevi G., Ortiz A.L., Sampath S., Padture N.P., Calcia-magnesia-alumino-silicate (CMAS) - induced degradation and failure of air plasma sprayed yttria stabilized zirconia thermal barrier coatings, Acta Materialia, 105 (2016) 355-366.
5. Dimiduk D.M., Perepezko J.H., Mo-Si-B alloys: developing a revolutionary turbine engine material, MRS Bulletin 28 (2003) 639-645.
6. Clarke D.R., Oechsner M., Padture N.P., Thermal barrier coatings for more efficient gas turbine engines, MRS Bulletin 37 (2012) 891-898.
7. Hardwicke C.U., Lau Y.-C., Advances in thermal spray coatings for gas turbines and energy generation: a review, Journal of Thermal Spray Technology 22 (2013) 564-576.
8. Sadowski T., Golewski P., Loadings in thermal barrier coatings of jet engine turbine blades - an experimental research and numerical modeling, Springer, London, 2016.
9. Guignard A., Development of thermal spray processes with liquid feedstocks, Forschungszentrum Julich, 2012.
10. Darolia R., Thermal barrier coatings technology: critical review, progress update, remaining challenges and prospects, International Materials Review 58 (2013) 315-348.
11. Schulz U., Schmucker M., Microstructure of ZrO2 thermal barrier coatings applied by EB-PVD, Materials Science and Engineering: A 276 (2000) 1-8.
12. Schulz U., Saruhan B., Fritscher K, Leyens C., Review on advanced EB-PVD ceramic topcoats for TBC applications, International Journal of Applied Ceramic Technology 1 (2004) 302-315.
13. VanEvery K., Krane M.J.M., Trice R.W., Wang H., Porter W., Besser M., Sordelet D., Ilavsky J., Almer J., Column formation in suspension plasma sprayed coatings and resultant thermal properties, Journal of Thermal Spray Technology 20 (2011) 817-828.
14. Karaoglanli A.C., Doleker K.M., Ozgurluk Y., State of the art thermal barrier coating (TBC) materials and TBC failure mechanism [in] Properties and characterization of modern materials, A. Oschner and H. Altenbach [eds.], Springer, Singapore, 2017.
15. Miller R.A., Current status of thermal barrier coatings - an overview, Surface and Coatings Technology 30 (1987) 1-11.
16. Miller R.A., Thermal barrier coatings for aircraft engines: history and directions, Journal of Thermal Spray Technology 6 (1997) 35-42.
17. Mauer G., Vassen R., Stoever D., Atmospheric plasma spraying of yttria-stabilized zirconia coatings with specific porosity, Surface and Coatings Technology 204 (2009) 172-179.
18. Vassen R., Jarligo M.O., Steinke T., Mack D.E., Stoever D., Overview on advanced thermal barrier coatings, Surface and Coatings Technology 205 (2010) 938-942.
19. Clarke D.R., Phillpot S.R., Thermal barrier coating materials, Materials Today 8 (2005) 22-29.
20. Stoever D., Pracht G., Lehmann H., Dietrich M., Doering J., Vassen R., New material concepts for next generation of plasma-sprayed thermal barrier coatings, Journal of Thermal Spray Technology 13 (2004) 76-83.
21. Pawłowski L., Finely grained nanometric and submicrometric coatings bythermal spraying: a review, Surface and Coatings Technology 202 (2008) 4318-4328.
22. Pawłowski L., Suspension and solution thermal spray coatings, Surface and Coatings Technology 203 (2009) 2807-2829.
23. Pawłowski L., The science and engineering of thermal spray coatings, 2nd ed., Wiley, Chichester, 2008.
24. Fauchais P., Montavon G., Bertrand G., From powders to thermally sprayed coatings, Journal of Thermal Spray Technology 19 (2009) 56-80.
25. Lima R.S., Marple B.R., Thermal spray coatings engineered from nanostructured ceramic agglomerated powders for structural, thermal barrier and biomedical applications: a review, Journal of Thermal Spray Technology 16 (2007) 40-63.
26. Gitzhofer F., Bouyer E., Boulos M.I., Suspension plasma spray, US5609921 A, 1997.
27. Vassen R., Kassner H., Mauer G., Stoever D., Suspension plasma spraying: process characteristics and applications, Journal of Thermal Spray Technology 19 (2010) 219-225.
28. Fauchais P., Vardelle M., Vardelle A., Goutier S., What do we know, what are the current limitations of suspension plasma spraying? Journal of Thermal Spray Technology 24 (2015) 1120-1129.
29. Fauchais P., Vardelle A., Solution and suspension plasma spraying of nanostructure coatings [in] Advances plasma spray applications, H. Jazi [ed.], ISBN: 978-953-51-0349-3, InTech, 2012.
30. Sokołowski P., Pawłowski L., Review of recent studies on suspension plasma sprayed ZrO2 coatings [in] Advances in Materials Science Research, M.C. Wythers [ed.], 26 Nova Science Publisher, USA, 2016.
31. Curry N., VanEvery K., Snyder T., Susnjar J., Bjorklund S., Performance testing of suspension plasma sprayed thermal barrier coatings produced with varied suspension parameters, Coatings 5 (2015) 338-356.
32. Marchand O., Bertrand P., Mougin J., Comminges C., Planche M.-P., Bertrand G., Characterization of suspension plasma sprayed solid oxy fuel cells electrodes, Surface and Coatings Technology 205 (2010) 993-998.
33. Fauchais P., Etchart-Salas R., Rat V., Coudert J.F., Caron N., Wittmann-Teneze K., Parameters controlling liquid plasma spraying: solutions, sols or suspensions, Journal of Thermal Spray Technology 17 (2008) 31-59.
34. Sokołowski P., Kozerski S., Pawłowski L., Ambroziak A., The key process parameters influecing formation of columnar microstructure in suspension plasma sprayed zirconia coatings, Surface and Coatings Technology 260 (2014) 97-106.
35. Koch C.C., Synthesis of nanostructured materials by mechanical milling: problems and opportunities, Nanostructured Materials 9 (1997) 13-22.
36. Łatka L., Cattini A., Chicot D., Pawłowski L., Kozerski S., Petit F., Denoirjean A., Mechanical properties of yttria- and ceria-stabilized zirconia coatings obtained by suspension plasma spraying, Journal of Thermal Spray Technology 22 (2013) 125-130.
37. Suryanarayana C., Mechanical alloying and milling, Progress in Materials Science 46 (2001) 1-184.
38. Movahedi B., Enayati M.H., Thermal spray coatings of Ni-10 wt.% Al composite powder synthesised by low energy mechanical milling, Surface Engineering 25 (2009) 276-283.
39. Rampon R., Marchand O., Filiatre C., Bertrand G., Influence of suspension characteristics on coatings microstructure obtained by suspension plasma spraying, Surface and Coatings Technology 202 (2008) 4337-4342.
40. Toma F.-L., Bertrand G., Begin-Colin S., Meunier C., Odile B., Klein D., Coddet C., Microstructure and environmental functionalities of TiO2-supported photocatalysts obtained by suspension plasma spraying, Applied Catalysis B Environmental 68 (2006) 74-84.
41. Kassner H., Vassen R., Stoever D., Study on instant droplet and particle stages during suspension plasma spraying, Surface and Coatings Technology 202 (2008) 4355-4361.
42. Larson R.G., The structure and rheology of complex fluids, Oxford University Press, New York, 1999.
43. Mueller S., Llewellin E.W., Mader H.M., The rheology of suspensions of solid particles, Proceedings of the Royal Society A - Mathematical, Physical and Engineering Series 466 (2010) 1201-1228.
44. Wang Z., Ni Z., Qiu D., Tao G., Yang P., Characterization of stability of ceramic suspension for slurry introduction in inductively coupled plasma optical emission spectrometry and application to aluminium nitride analysis, Journal of Analytical Atomic Spectroscopy 20 (2005) 315-319.
45. Michalak M., Łatka L., Sokołowski P., Feedstock preparation for suspension plasma spraying, Spajanie 37 (2017) 54-58 (in Polish).
46. Otterstedt J.A., Small particles technology [in] Dispersabilite, A. Foissy, S.A. Bachiri (eds.), EDP Sciences, Les Ulis, 2003.
47. Waldbillig S., Kesler O., The effect of solids and dispersant loadings on the suspension viscosities and deposition rates of suspension plasma sprayed YSZ coatings, Surface and Coatings Technology 203 (2009) 2098-2101.
48. Killinger A., Status and future trends in suspension plasma spraying [in] Future development of thermal spray coatings, N. Espallargas [ed.], Woodhead Publishing, Cambridge, 2015.
49. Hurevich V., Smurov I., Pawłowski L., Theoretical study of the powder behavior of porous particles in a flame during plasma spraying, Surface and Coatings Technology 151-152 (2002) 370-376.
50. Killinger A., Gadow R., Mauer G., Guignard A., Vassen R., Stoever D., Review of new developments in suspension and solution precursor thermal spray processes, Journal of Thermal Spray Technology 20 (2011) 677-695.
51. Fauchais P., Joulia A., Goutier S., Chazelas C., Vardelle M., Vardelle A., Rossigniol S., Suspension and solution plasma spraying, Journal of Physics D: Applied Physics 46 (2013) 1-14.
52. Kozerski S., Pawłowski L., Jaworski R., Roudet F., Petit F., Two zones microstructure of suspension plasma sprayed hydroxyapatite coatings, Surface and Coatings Technology 204 (2010) 1380-1387.
53. Łatka L., Goryachev S.B., Kozerski S., Pawłowski L., Sintering of fine particles in suspension plasma sprayed coatings, Materials 3 (2010) 3845-3866.
54. Łatka L., Goryachev S.B., Kozerski S., Pawłowski L., Lampke T., Buildup mechanisms of suspension plasma sprayed ZrO2 + 8 wt.% Y2O3 coatings, Proceedings International Thermal Spray Conference, Hamburg, Germany, 2011.
55. Sokołowski P., Pawłowski L., Dietrich D., Lampke T., Jech D., Advanced microscopic study of suspension plasma sprayed zirconia coatings with different microstructures, Journal of Thermal Spray Technology 25 (2015) 94-104.
56. Pateyron B., Pawłowski L., Calve N., Delluc G., Denoirjean A., Modeling of occurring in plasma jet during suspension spraying of hydroxyapatite coatings, Surface and Coatings Technology 214 (2013) 86-90.
57. Bernard B., Quet A., Bianchi L., Joulia A., Malie A., Schick V., Remy B., Thermal insulation properties of YSZ coatings: Suspension Plasma Spraying (SPS) versus Electron Beam Physical Vapor Deposition (EB-PVD) and Atmospheric Plasma Spraying (APS), Surface and Coatings Technology 318 (2017) 122-128.
58. Sokołowski P., Nylen P., Musalek R., Łatka L., Kozerski S., Dietrich D., Lampke T., Pawłowski L., The microstructural studies of suspension plasma sprayed zirconia coatings with the use of high-energy plasma torches, Surface and Coatings Technology 318 (2017) 250-261.
59. Ganvir A., Joshi S., Markocsan N., Vassen R., Tailoring columnar microstructure of axial suspension plasma sprayed TBCs for superior thermal shock performance, Materials and Design 144 (2018) 192-208.
60. Oliker V.E., Terent’ev A.E., Shvedova L.K., Martsenyuk I.S., Use of aqueous suspensions in plasma spraying of alumina coatings, Powder Metallurgy and Metal Ceramics 48 (2009) 115-120.
61. Tingaud O., Bertrand P., Bertrand G., Microstructure and tribological behavior of suspension plasma sprayed Al2O3 and Al2O3-YSZ composite coatings, Surface and Coatings Technology 205 (2010) 1004-1008.
62. Darut G., Valette S., Montavon G., Ageorges H., Denoirjean A., Fauchais P., Klyatskina E., Segova F., Salvador M.D., Comparison of Al2O3 and Al2O3-TiO2 coatings manufactured by aqueous and alcoholic suspension plasma apraying, Thermal Spray: Global Solutions for Future Application, 2010, Singapore, DVS Media, Dusseldorf, Germany, 2010, pp. 212-217.
63. Łatka L., Pawłowski L., Chicot D., Pierlot C., Petit F., Mechanical properties of suspension plasma sprayed hydroxyapatite coatings submitted to simulated body fluid, Surface and Coatings Technology 205 (2010) 954-960.
64. Kozerski S., Łatka L., Pawłowski L., Cernuschi F., Petit F., Pierlot C., Podlesak H., Laval J.P., Preliminary studies on suspension plasma sprayed ZrO2 + 8 wt.% Y2O3 coatings, Journal of the European Ceramic Society 31 (2011) 2089-2098.
65. Carpio P., Bannier E., Salvador M.D., Borrell A., Moreno R., Sanchez E., Effect of particle size distribution of suspension feedstock on the microstructure and mechanical properties of suspension plasma spraying YSZ coatings, Surface and Coatings Technology, 268 (2015) 293-297.
66. Zhou D., Guillon O., Vassen R., Development of YSZ thermal barrier coatings using axial suspension plasma spraying, Coatings 7 (2017) 1-17.
67. Ma X., Ruggiero P., Practical aspects of suspension plasma spray of thermal barrier coatings of potential gas turbine components, Journal of Thermal Spray Technology 27 (2018) 591-602.
68. Parker W.J., Jenkins R.J., Butler C.P., Abbot G.L., Flash method of determining thermal diffusivity, heat capacity and thermal conductivity, Journal of Applied Physics 32 (1961) 1679-1684.
69. Łatka L., Cattini A., Pawłowski L., Valette S., Pateyron B., Lecompte J.-P., Kumar R., Denoirjean A., Thermal diffusivity and conductivity of yttria stabilized zirconia coatings obtained by suspension plasma spraying, Surface and Coatings Technology 208 (2012) 87-91.
70. Ganvir A., Curry N., Markocsan N., Nylen P., Toma F.-L., Comparative study of suspension plasma sprayed and suspension high velocity oxy-fuel sprayed YSZ thermal barrier coatings, Surface and Coatings Technology 268 (2015) 70-76.
71. Bernard B., Schick V., Remy B., Quet A., Bianchi L., High Temperature Thermal Properties of Columnar Yttria Stabilized Zirconia Thermal Barrier Coating Performed by Suspension Plasma Spraying, Journal of Physics: Conference Series 745 (2016).
72. Ganvir A., Curry N., Bjorklund S., Markocsan N., Nylen P., Characterization of Microstructure and Thermal Properties of YSZ Coatings Obtained by Axial Suspension Plasma Spraying (ASPS), Journal of Thermal Spray Technology 24 (2015) 1195-1204.
73. Fan W., Bai Y., Li J.R., Gao Y., Chen H.Y., Kang Y.X., Shi W.J., Li B.Q., Microstructural design and properties of supersonic suspension plasma sprayed thermal barrier coatings, Journal of Alloys and Compounds 699 (2017) 763-774.
74. Zhai M., Li D., Zhao Y., Zhong X., Shao F., Zhao H., Liu C., Tao S., Comparative study on thermal shock behavior of thick thermal barrier coatings fabricated with nano-based YSZ suspension and agglomerated particles, Ceramics International 42 (2016) 12172-12179.
75. Curry N., Tang Z., Markocsan N., Nylen P., Influence of bond coat surface roughness on the structure of axial suspension plasma spray thermal barrier coatings - thermal and lifetime performance, Surface and Coatings Technology 268 (2015) 15-23.
76. Gupta M., Design of thermal barrier coatings, a modeling approach, Springer, London, 2015.
77. Fan W., Bai Y., Review of suspension and solution precursor plasma sprayed thermal barrier coatings, Ceramics International 42 (2016) 14299-14312.
78. Ma W., Jarligo M.O., Mack D.E., Pitzer D., Malzbender J., Vassen R., Stoever D., New generation perovskite thermal barrier coatings materials, Journal of Thermal Spray Technology 17 (2008) 831-837.
79. Habidi M.H., Wang L., Liang J., Guo S.M., An investigation on hot corrosion behavior of YSZ-Ta2O5 in Na2SO4 + V2O5 salt at 1100ºC, Corrosion Science 75 (2013) 409-414.
80. Mauer G., Jarligo M.O., Mack D.E., Vassen R., Plasma-sprayed thermal barrier coatings: new materials, processing issues and solutions, Journal of Thermal Spray Technology 22 (2013) 646-658.
81. Cao X.Q., Vassen R., Stover D., Ceramic materials for thermal barrier coatings, Journal of the European Ceramic Society 24 (2004) 1-10.
82. Wu J., Wei X., Padture N.P., Klemens P.G., Gell M., Garcia E., Miranzo P., Osendi M.I., Low thermal conductivity rare-earth zirconates for potential thermal barrier coating applications, Journal of the American Ceramic Society 85 (2002) 3031-3035.
83. Zhu D., Miller R.A., Development of advanced low conductivity thermal barrier coatings, International Journal of Applied Ceramic Technology 1 (2004) 86-94.
84. Gong S., VanEvery K., Wang H., Trice R.W., Microstructure and thermal properties of inflight rare-earth doped thermal barriers prepared by suspension plasma spray, Journal of the European Ceramic Society 34 (2014) 1243-1253.
85. Wang C., Wang Y., Wang L., Hao G., Sun X., Shan F., Zou Z., Nanocomposite lanthanum zirconate thermal barrier coating deposited by suspension plasma spray process, Journal of Thermal Spray Technology 23 (2014) 1030-1036.
86. Vassen R., Traeger F., Stoever D., New thermal barrier coatings based on pyrochlore/YSZ double-layer systems, International Journal of Applied Ceramic Technology 1 (2004) 351-361.
87. Bakan E., Vassen R., Ceramic top coats of plasma-sprayed thermal barrier coatings: materials, processes and properties, Journal of Thermal Spray Technology 26 (2017) 992-1010.
88. Mahade S., Curry N. Bjorklund S., Markocsan N., Nylen P., Thermal conductivity and thermal cyclic fatigue of multilayered Gd2Zr2O7/YSZ thermal barrier coatings processed by suspension plasma spray, Surface and Coatings Technology 283 (2015) 329-336.
89. Mahade S., Curry N. Bjorklund S., Markocsan N., Nylen P., Vassen R., Functional performances of Gd2Zr2O7/YSZ multi-layered thermal barrier coatings deposited by suspension plasma spray, Surface and Coatings Technology 318 (2017) 208-216.
90. Schlegel N., Sebold D., Sohn Y.J., Mauer G., Vassen R., Cycling performance of a columnar-structured complex perovskite in a temperature gradient test, Journal of Thermal Spray Technology 24 (2015) 1205-1212.
91. Wang C., Wang Y., Fan S., You Y., Wang L., Yang C., Sun X., Li X., Optimized functionally graded La2Zr2O7/8YSZ thermal barrier coatings fabricated by suspension plasma spraying, Journal of Alloys and Compounds 649 (2015) 1182-1190.
92. Mahade S., Curry N. Bjorklund S., Markocsan N., Nylen P., Engineered thermal barrier coatings deposited by suspension plasma spray, Materials Letters 209 (2017) 517-521.
93. Carpio P., Salvador M.D., Borrel A., Navarro L., Sanchez E., Molten salt attack on multilayer and functionally-graded YSZ coatings, Ceramic International 44 (2018) 12634-12641.
94. Curry N., Design of thermal barrier coatings, PhD Thesis, University West, Sweden, 2014.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).

Typ dokumentu

Bibliografia

Identyfikatory

DOI

10.1515/adms-2017-0044

Identyfikator YADDA

bwmeta1.element.baztech-9171d7e3-38d9-4e2f-844f-70b03962b333