Nowa wersja platformy, zawierająca wyłącznie zasoby pełnotekstowe, jest już dostępna.
Przejdź na https://bibliotekanauki.pl

PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
2016 | Vol. 16, nr 2(48) | 57--67
Tytuł artykułu

Cavitation erosion of P110 steel in different drilling muds

Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The P110 steel specimens were subjected to ultrasonic cavitation erosion in different compositions of drilling muds and surfactant additive. The test procedure was based on ASTM-G-32 standard recommendations. API 5CT-P110 steel is used for pipes in oil and gas industry. The harsh environment and high velocity of flows poses corrosive and erosive threat on materials used there. The composition of drilling fluid influences its rheological properties and thus intensity of cavitation erosion. The erosion curves based on weight loss were measured.
Wydawca

Rocznik
Strony
57--67
Opis fizyczny
Bibliogr. 20 poz., rys., tab., wykr.
Twórcy
autor
  • Gdańsk University of Technology, Faculty of Mechanical Engineering, Department of Materials Technology and Welding, 11/12 Narutowicza, 80-233 Gdańsk, Poland, mateusz.kmiec@pg.gda.pl
  • Gdańsk University of Technology, Faculty of Mechanical Engineering, Department of Materials Technology and Welding, 11/12 Narutowicza, 80-233 Gdańsk, Poland
autor
  • Gdańsk University of Technology, Faculty of Mechanical Engineering, Department of Materials Technology and Welding, 11/12 Narutowicza, 80-233 Gdańsk, Poland
Bibliografia
  • 1. Brennen C.E., Cavitation in medicine. Interface Focus, 5 (2015).
  • 2. Gogate P.R., Kabadi A.M., A review of applications of cavitation in biochemical engineering/biotechnology. Biochemical Engineering Journal, 44 (2009), 60-72.
  • 3. Szkodo M., Estimation of cavitation erosion resistance of materials. Advances in Materials Science, 6 (2006), 43-48.
  • 4. Rosenberg LD. Powerful ultrasonic fields, Nauka Moscow (1968), 18-45.
  • 5. Peng C-h, Liu Z-y, Wei X-z. Failure analysis of a steel tube joint perforated by corrosion in a well-drilling pipe. Engineering Failure Analysis, 25 (2012), 13-28.
  • 6. Smith L. Control of corrosion in oil and gas production tubing. British Corrosion Journal, 34, 4 (1999), 247-53.
  • 7. Institute AP. API 5-CT specification for casing and tubing, 9th edition, 2011.
  • 8. Hernandez S., Linares F.L., Bruzual J., Luzon J.G., Isolation of Potential Corrosion Inhibiting Compounds in Crude Oils. NACE International.
  • 9. Brennen C.E., Cavitation and Bubble Dynamics: Oxford University Press; 1995.
  • 10. Brondel D, Edwars R, Hayman A, Hill D, Mehta S, Semerad T., Corrosion in the Oil industry. Oilfield Review, 6 (1994).
  • 11. ASTM. G32-10 Standard Test Method for Cavitation Erosion Using Vibratory Apparatus, 2010.
  • 12. Ultrasonics H., UP200s/UP400S Instruction manual Ultrasonic processors for Laboratories.
  • 13. Dugan G., The Versatile PAC Polymer. National Driller, 30(1) (2009), 60-72.
  • 14. El-Lateef H.M., Abbasov V.M., Aliyeva L.I., Ismayilov T.A., Some surfactants based on the vegetable oils as CO2 corrosion Inhibitors for mild steel in oilfield formation water. International Journal of Corrosion Scale Inhibition, 4(2) (2015), 162-175.
  • 15. Brujan E.A., Cavitation bubble dynamics in non-Newtonian fluids. Polymer Engineering & Science, 49(3) (2009), 419-431.
  • 16. Gruzdkov A. A, Petrov Y.V., Cavitation breakup of low-and high-viscosity liquids. Technical Physics, 53(3) (2008), 291-295.
  • 17. Arora M., Cavitation Inception on Microparticles: A Self-Propelled Particle Accelerator. Physical Review Letters, 92(17) (2004), 174501.
  • 18. Gronroos A, Pentti P, Hanna K., Ultrasonic degradation of aqueous carboxymethylcellulose: effect of viscosity, molecular mass, and concentration. Ultrasonic Sonochemistry, 15 (2008), 644-652.
  • 19. Mettin R., et al., Imaging of the influence of surfactants on bubble structures. DAGA. Stuttgart 2007, 119-20.
  • 20. Lee J, Kentish S, Matula T.J., Ashokkumar M., Effect of surfactants on inertial cavitation activity in a pulsed acoustic field. The Journal of Physical Chemistry B, 109 (2005), 16860-16865.
Uwagi
PL
Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.
Typ dokumentu
Bibliografia
Identyfikatory
Identyfikator YADDA
bwmeta1.element.baztech-911dac58-f896-4ba6-a2bf-af3e53aecb8f
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.