Properties of Fe-Al Type Intermetallic Layers Produced by AC TIG Method

• Autorzy: Gontarz, G. , Golański, D. , Chmielewski, T.
• Języki publikacji: EN

Abstrakty

EN

The paper presents the results of two new in-situ methods of Fe-Al intermetallic compounds layers fabrication on the steel substrates. The layers were produced by hardfacing of pure aluminum and titanium on the steel (S235JR) substrate as well as in the two-step process: the thermal spraying of pure aluminum on a steel substrate and subsequent remelting of aluminum coating with iron from the substrate using AC TIG method. As a result of the synthesis of Fe, Al and Ti components (for the hardfacing method) the new layer material based on the ordered intermetallic phases was achieved. The effects were confirmed by metallographic examinations, hardness tests and the diffraction patterns of the analyzed remelted layers. In addition, measurements of residual stresses in the layer and substrate were carried out.

Słowa kluczowe

EN

intermetallic phases; hardfacing; thermal spraying; AC TIG

• Czasopismo: Advances in Materials Science
• Rocznik: 2013
• Tom: Vol. 13, nr 3(37)
• Strony: 5--16
• Opis fizyczny: Bibliogr. 6 poz., rys.

Twórcy

autor

Gontarz, G.

• Warsaw University of Technology, Faculty of Production Engineering, Department of Welding Engineering, 02-524 Warsaw, Narbutta 85, Poland,

autor

Golański, D.

• Warsaw University of Technology, Faculty of Production Engineering, Department of Welding Engineering, 02-524 Warsaw, Narbutta 85, Poland

autor

Chmielewski, T.

• Warsaw University of Technology, Faculty of Production Engineering, Department of Welding Engineering, 02-524 Warsaw, Narbutta 85, Poland

Bibliografia

• 1. Wiliama J.C.: Intermetallics for structural applications: potential, reality and road ahead. Structural Intermetallics. M.V. Nathalat al. [ed.], TMS 1997, 3-8.
• 2. Bystrzycki J., Varin R.A., Bojar Z.: Progress in investigation of intermetallics with aluminum participation. Inżynieria Materiałowa 5 (1996), 137-149.
• 3. Gontarz G.: The remelting od surface layers deposited by welding methods. Scientific Papers. Mechanics series No.230: Joining in modern technology. Edited by Publishing House of Warsaw University of Technology, Warsaw 2010, 115-129.
• 4. Gontarz G., Chmielewski T., Golański D.: Modification of sprayed aluminum layers on steel substrate by the concentrated heat source Przegląd Spawalnictwa 12 (2011), 52-54.
• 5. Stoney G.G.: The Tension of Metallic Films deposited by Electrolysis. Proc. R. Soc. London, A82 (1909), 172-175.
• 6. Clyne T.W., Gill S.C.: Residual Stresses in Surface Coatings and Their Effects on Interfacial Debonding: A Review of Recent Work. J. Thermal Spray Technology 5(4) (1996), 401-418.