The influence of drying parameters on wood properties

• Autorzy: Barański, J. , Chuchała, D. , Orłowski, K. , Muziński, T.
• Języki publikacji: EN

Abstrakty

EN

The influence of drying conditions on wood properties is presented. In the paper the classical approach was used to determine energetic effects (cutting forces and cutting power) of wood sawing process on the basis of the wood specific cutting resistance, material constant. Wood species, namely pine (Pinus sylvestris L.) and beech (Fagus silvatica L.) from the northern part of the Pomerania region in Poland, were subject for determination of wood cutting properties after drying process at various conditions using air at 25 o C, air-steam mixture at 80 o C and steam at 110 o C.

Słowa kluczowe

EN

cutting power; fracture mechanics; wood drying

• Czasopismo: Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
• Rocznik: 2014
• Tom: No. 86
• Strony: 7--12
• Opis fizyczny: Bibliogr. 19 poz.

Twórcy

autor

Barański, J.

autor

Chuchała, D.

autor

Orłowski, K.

autor

Muziński, T.

Bibliografia

• 1. FISCHER R. (2004): Micro processes at cutting edge - some basics of machining wood. In: Proceedings of the 2nd international symposium on wood machining, Vienna, Austria.
• 2. SCHOLZ F., DUSS R., HASSLINGER R., RATNASINGAM J. (2009): Integrated model for the prediction of cutting forces. In: Handong Zhou, Nanfeng Zhu, Tao Ding (eds) Proceedings of 19th international wood machining seminar, October 21-23, Nanjing, China, Nanjing Forestry University.
• 3. ORLOWSKI K. (2007): Experimental studies on specific cutting resistance while cutting with narrow-kerf saws. Advances in Manufacturing Science and Technology. 31(1).
• 4. AGAPOV A.I. (1983): Dinamika processa pilenija drevesiny na lesopilonych ramach. (In Russian: Dynamics of wood sawing on frame sawing machines), Kirovskij Politechničeskij Institut, Izdanije GGU, Gorkij.
• 5. ORLICZ T. (1988): Obróbka drewna narzędziami tnącymi. (In Polish: Wood machining with cutting tools) Skrypty SGGW-AR w Warszawie, Wydawnictwo SGGW-AR, Warszawa
• 6. MANŽOS F.M. (1974): Derevorežuŝĉie Stanki. (In Russian: Wood cutting machine tools). Izdatel’stvo ‘‘Lesnaâ promŝylennost’’, Moskva.
• 7. ATKINS A.G. (2003): Modelling metal cutting using modern ductile fracture mechanics: quantitative explanations for some longstanding problems. Int J. Mech. Sci. 45.
• 8. ATKINS A.G. (2009): The science and engineering of cutting. The mechanics and process of separating, scratching and puncturing biomaterials, metals and non-metals. Butterworth- Heinemann is an imprint of Elsevier, Oxford.
• 9. LATERNSER R., GÄNSER H.P., TAENZER L., HARTMAIER A. (2003): Chip formation in cellular materials. Transactions of the ASME 125.
• 10. WILLIAMS J.G. (1998): Friction and plasticity effects in wedge splitting and cutting fracture tests. J. of Materials Science 33.
• 11. WILLIAMS J.G., PATEL Y., BLACKMAN B.R.K. (2010): A fracture mechanics analysis of cutting and machining. Eng. Fract. Mech. 77(2).
• 12. MERHAR M., BUČAR D.G., GOSPODARIČ B., BUČAR B. (2011): Orthogonal cutting as a method for the determination of fracture properties of oriented wood tissue. In: Grönlund A., Cristóvão L. (eds) Proceedings of the 20th international wood machining seminar, June 7-10, 2011, Skellefteå, Sweden. Luleá University of Technology
• 13. MERHAR M., BUČAR B. (2012): Cutting force variability as a consequence of exchangeable cleavage fracture and compressive breakdown of wood tissue. Wood Sci. Technol. 46(5).
• 14. ORLOWSKI K.A., ATKINS A. (2007): Determination of the cutting power of the sawing process using both preliminary sawing data and modern fracture mechanics. In: Navi P., Guidoum A. (eds) Proceedings of the third international symposium on wood machining. Fracture mechanics and micromechanics of wood and wood composites with regard to wood machining, 21-23 May, Lausanne, Switzerland. Presses Polytechniques et Universitaires Romandes, Lausanne.
• 15. ORLOWSKI K.A., PAŁUBICKI B. (2009): Recent progress in research on the cutting process of wood. A review COST Action E35 2004-2008: wood machining- micromechanics and fracture. Holzforschung 63.
• 16. ORLOWSKI K.A. (2010): The fundamentals of narrow-kerf sawing: the mechanics and quality of cutting. Publishing house of the Technical University in Zvolen, Technical University in Zvolen.
• 17. ORLOWSKI K.A., OCHRYMIUK T., ATKINS A. (2010): Specific cutting resistance while sawing of wood the size effect. Ann. WULS-SGGW, Forestry and Wood Technology 72.
• 18. BARAŃSKI J., WIERZBOWSKI M., KONOPKA A. (2014): The change of mechanical properties of selected wood species after drying process under various conditions. WTD Conference - Wood Material of XXI century, 18-19 November 2014, Rogów, Poland.
• 19. WASIELEWSKI R., ORLOWSKI K. (2002): Hybrid dynamically balanced saw frame drive. Holz Roh- Werkst 60.