Study of high-strength and high-conductivity Cu-Sn-Fe alloys

• Autorzy: Zhang, J. , Cui, X. , Ma, J. , Wang, Y.
• Języki publikacji: EN

Abstrakty

EN

Cu-Sn-Fe alloys with different compositions were developed by casting, normalizing treatment, cold roll and subsequent annealing treatment. The results showed that the tensile strength and resistivity of the Cu-xSn-xFe alloys (where x represents wt.%) improved with increasing the content of Sn and Fe. Compared with the as-cast alloys, the resistivity and tensile strength of the Cu-xSn-xFe alloys after normalizing and cold rolling treatment increased. In addition, the resistivity and mechanical properties of the alloys after the annealing treatment were improved significantly. Finally, a conclusion could be drawn that the annealed Cu-2Sn-5Fe alloy had good mechanical properties and resistivity, and the values of the tensile strength, mechanical elongation and resistivity reached 552 MPa, 32 % and 1.92 μΩ cm, respectively.

Słowa kluczowe

EN

Cu-Sn-Fe alloy; conductive material; tensile strength; resistivity

• Czasopismo: Materials Science Poland
• Rocznik: 2016
• Tom: Vol. 34, No. 1
• Strony: 142--147
• Opis fizyczny: Bibliogr. 25 poz., rys., tab.

Twórcy

autor

Zhang, J.

• School of Applied Science, Taiyuan University of Science and Technology, Taiyuan 030024, China

autor

Cui, X.

• School of Applied Science, Taiyuan University of Science and Technology, Taiyuan 030024, China

autor

Ma, J.

• Institute of Materials Science and Technology, Taiyuan University of Science and Technology, Taiyuan 030024, China

autor

Wang, Y.

• Institute of Materials Science and Technology, Taiyuan University of Science and Technology, Taiyuan 030024, China,

Bibliografia

• 1. Suzuki S., Shibutani N., Mimura K., Isshiki M., Waseda Y., J. Alloy. Compd., 417 (2006), 116.
• 2. Spencer K., Lecouturier F., Thilly L., Embury J.D., Adv. Eng. Mater., 6 (2004), 290.
• 3. Jones H., Herlach F., Lees J.A., Whitworth H.M., Day A.G., Jeffrey D.J., Dew-Hughes D., Sherratt G., IEEE Trans. Magn., 24 (1988), 1055.
• 4. Beloufa A., Tribol. Int., 43 (2010), 2110.
• 5. Freudenberger J., Grunberger W., Botcharova E., Gaganov A., Schultz L., Adv. Eng. Mater., 9 (2002), 677.
• 6. Liu J.B., Zeng Y.W., Meng L., J. Alloy. Compd., 468 (2009), 73.
• 7. Meng L., Liu J.B., Mater. Sci. Forum, 539 - 543 (2007), 2798.
• 8. Liu J.B., Zhang L., Meng L.,Appl. Phys. A, 86 (2007), 529.
• 9. Sandim H.R.Z., Sandim M.J.R., Bernardi H.H., Lins J.F.C., Raabe D., Scripta Mater., 51 (2004), 1099.
• 10. Sandim M.J.R., Shigue C.Y., Ribeiro L.G., Filgurira M., Sandim H.R.Z., Ieee T. Appl. Supercon., 12 (2002), 1195.
• 11. Jin Y., Adachi K., Suzuki H.G., Takeuchi T., Metall. Meter. Trans. A, 29 (1998), 2195.
• 12. Deng J.Q., Zhang X.Q., Liu F., Zhao Z.X., Ye Y.F., Mater. Design, 30 (2009), 4444.
• 13. Song J.S, Kim H.S, Lee C.T, Hong S.I.,J. Mater. Process. Tech., 130 - 131 (2002), 272.
• 14. Masuda C., Tanaka Y.,Int. J. Fatigue, 28 (2006), 1426.
• 15. Deng J.Q., Zhang X.Q., Shang S.Z., Liu F., Zhao Z.X., Ye Y.F., Mater. Design, 30 (2009), 4444.
• 16. Liu K., Lu D.P., Zhou H.T., Atrens A.D., Chen Z.B., Zou J., Zeng S.M., J. Alloy. Compd., 500 (2010), L22.
• 17. Kermajani M., Raygan Sh., Hanayi K., Ghaffari H., Mater. Design, 51 (2013), 688.
• 18. Biselli C., Morris D.G.,Acta Mater., 44 (1996), 493.
• 19. Wu Z.W., Chen Y., Meng L.,J. Alloy. Comp., 481 (2009), 236.
• 20. Xie Z.X., Gao H.Y., Lu Q., Wang J., Sun B.D., J. Alloy. Compd., 508 (2010), 320.
• 21. Wu Z.W., Liu J.J., Chen Y., Meng L.,J. Alloy. Compd., 467 (2009), 213.
• 22. Maki K., Ito Y., Matsunaga H., Mori H.,Scripta Mater., 68 (2013), 777.
• 23. Ehsanian Mofrad H., Raygan S., Amin Forghani B., Hanaei K., Ahadi F.K.,Mater. Design, 41 (2012), 182.
• 24. Hong S.I., Hill M.A.,Scripta Mater., 44 (2001), 2509.
• 25. Gao H.Y., Wang J., Shu D.,Scripta Mater.,53 (2005), 11.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.

Identyfikatory

DOI

10.1515/msp-2016-0015