Stereology of carbide phase in modified hypereutectic chromium cast iron

• Autorzy: Suchoń, J. , Studnicki, A. , Przybył, M.
• Języki publikacji: EN

Abstrakty

EN

In paper are presented results of studies of carbide phase stereology modified hypereutectic wear resistance chromium cast iron which contains carbon about 3,5% and chromium about 25%. Three substances were applied to the modification: boron carbide (B₄C), ferroniobium (FeNb) and mixture of ferroniobium and rare-earth (RE). The measurements of geometrical features of carbides were conducted on microsection taken from castings which were cooled with various velocities.

Słowa kluczowe

PL

żeliwo chromowe; krystalizacja; modyfikacja; stereologia węglików

EN

chromium cast iron; crystallization; modification; stereology of carbides

• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2010
• Tom: Vol. 10, iss. 2
• Strony: 169--174
• Opis fizyczny: Bibliogr. 20 poz., rys., tab., wykr.

Twórcy

autor

Suchoń, J.

• Silesian University of Technology, Faculty of Mechanical Engineering, Department of Foundry, Towarowa 7, 44-100 Gliwice, Poland ,

autor

Studnicki, A.

• Silesian University of Technology, Faculty of Mechanical Engineering, Department of Foundry, Towarowa 7, 44-100 Gliwice, Poland

autor

Przybył, M.

• Silesian University of Technology, Faculty of Mechanical Engineering, Department of Foundry, Towarowa 7, 44-100 Gliwice, Poland

Bibliografia

• [1] Sakwa W., Jura S., Sakwa J.: Wear resistance iron alloys. Part I Cast iron. Wyd. ZG STOP, Kraków 1980 (in Polish).
• [2] Podrzucki Cz.: Cast Iron. Structure, Properties, Application. Vol. 1 and 2, Wyd. ZG STOP, Kraków 1991 (in Polish).
• [3] Gierek A.: The abrasive wears of metal working elements. Skrypt Pol. Śl., No. 1752, Gliwice 1993 (in Polish).
• [4] Dogan O.N., Hawk J.A., Laird II G., Metall. Mater. Trans. A, 1997, 28A (6), p 1315.
• [5] Llewellyn R.J., Yick S.K., Dolman K.F, Wear, 2004, 256 (6), p 592.
• [6] Sare I.R., Wear, 87 (1983) 207-225.
• [7] Gawroński J. i in., Archiwum Odlewnictwa, wydanie specjalne, vol.4, nr 16, PAN Katowice 2004 (in Polish).
• [8] Fulcher J.K., Kosel T.H., Fiore N.F., Wear, 1983, 84 (3), p 313.
• [9] Fiset M., Peev K., Radulovic M.: The influence of nobium on fracture toughness and abrasion resistance in high-chromium white cast irons. Journal of Materials Science Letters 12, 1993, p. 615.
• [10] Zhi X., Xing J., Fu H., Xiao B.: Effect of nobium on the as-cast microstructure of a hypereutectic high chromium cast iron. Materials Letters 62, 2008, p. 857.
• [11] Qu Y., Xing J., Zhi X., Peng J., Fu H.: Effect of cerium on the as-cast microstructure of a hypereutectic high chromium cast iron. Materials Letters 62, 2008, p. 3024.
• [12] Radulovic M., Fiset M., Peev K.: The influence of vanadium on fracture toughness and abrasion resistance in high chromium white cast irons. Journal of Materials Science 29, 1994, p. 5085.
• [13] Guo C., Kelly P.M.: Boron solubility in Fe-Cr-B cast irons. Materials Science and Engineering A352, 2003, p. 40.
• [14] Bedolla Jacuinde A., Rainforth W.M.: The wear behaviour of high-chromium white cast irons as a function of silicon and Mischmetal content. Wear 250, 2001, p. 449.
• [15] Kopyciński D.: Analysis of the structure of castings made from chromium white cast iron resistant to abrasive wear. Archives of Foundry Engineering, Vol. 9, iss. 4, 2009, p.109-112.
• [16] Studnicki A.: Experimental modeling of cast cooling in foundry mould. Archives of Founding, No. 14, 2004, p.476 (in Polish).
• [17] Studnicki A., Przybył M., Kilarski J.: Casting analysis of chromium cast iron in sand mould – physical modeling of cooling. Archives of Founding, No. 14, 2004, p.482 (in Polish).
• [18] Studnicki A., Przybył M., Bartocha D.: The investigation of sensibility of chromium cast iron on speed cooling of casting - the analysis of parameters of crystallization and structure cast iron, Foundry Review, V.55, no. 4, 2005, p. 232 (in Polish).
• [19] Studnicki A., Kilarski J., Przybył M., Suchoń J., Bartocha D.: Wear resistance of chromium cast iron – research and application. Journal of Achievements in Materials and Manufacturing Engineering. Vol.16 issue 1-2, May-June 2006, 63-73.
• [20] Cybo J., Jura J.: The functional description of isometrical structures in metallography. Wyd. Pol. Śl., Gliwice 1995.