Friction conditions in the friction brake system of Mi-2 helicopter

• Autorzy: Lacki, P.
• Języki publikacji: EN

Abstrakty

EN

An assessment of friction conditions during braking on durability of structural elements of the drum brake is the goal of the work. The analysed brake in a symmetric system is used in Mi-2 helicopter. In the so far applied solutions a friction lining and brake shoe were fastened up by riveting. The new asbestos-free friction linings crack when using riveting technology. One way to avoid cracking is gluing instead of riveting. This paper presents a numerical analysis of the drum brake with the friction lining fastened by gluing. The numerical model includes a three-dimensional structure composed of seven structural elements and comparison of four material groups. A distribution of contact pressure between the frictional elements, and a stress state in the structural elements of the drum brake were determined for the assumed boundary and initial conditions. It was stated that the calculated distribution of the contact pressures is nonuniform and depends on the sense of rotation of the drum brake. This paper also presents the results of comparative tests of bonding strength for three different glues. The tests were carried out on a specially designed for this purpose test stand.

Słowa kluczowe

PL

tarcie; hamulec bębnowy; śmigłowiec; klej; metoda elementów skończonych

EN

friction; drum brakes; helicopter; glue; finite element method

• Czasopismo: Archives of Civil and Mechanical Engineering
• Rocznik: 2013
• Tom: Vol. 13, no. 3
• Strony: 297--303
• Opis fizyczny: Bibliogr. 17 poz., rys., tab., wykr.

Twórcy

autor

Lacki, P.

• Czestochowa University of Technology, 69 Dąbrowskiego Str., 42-201 Częstochowa, Poland,

Bibliografia

• [1] M. Triches, N.Y. Gerges Samir, R. Jordan, Analysis of brake squeal noise using the finite element method: a parametric study, Applied Acoustics 69 (2008) 147-162 .
• [2] M. Eriksson, F. Bergman, S. Jacobson, On the nature of tribiological contact in automotive brakes, Wear 252 (1/2) (2002) 26-36.
• [3] M. Tirovic, A.J. Day, Disk brake interface pressure distribution, Proceedings of the Institution of Mechanical Engineers, D: Journal of Automobile Engineering 205 (1991) 46–137.
• [4] A. Podratzky, H. Bansemir, Design and experimental characterization of modern helicopters rotor brakes, Aerospace Science and Technology 11 (2007) 360–369.
• [5] E. Mazanek (Ed.), Examples of Calculations of the Base Machine Design. Bearings, Clutches and Brakes, Gears (in Polish), WNT Warszawa, 2005 .
• [6] J. Adamus, The in fluence of friction and lubrication on sheet-aluminium forming process, in: Technische Akademie Esslingen International Tribology Colloquium Proceedings 14 III, 2004 pp. 1813–1818.
• [7] Z. Osiński, Clutches and Brakes (in polish), PWN Warszawa, 2000.
• [8] C. Hohmann, K. Schiner, K. Oerter, H. Reese, Contact analysis for drum brakes and disk brakes using ADINA, Computers and Structures 72 (1999) 185-198.
• [9] C. Watson, T.T. Newcomb, A three-dimensional finite element approach to drum brake analysis, Proceedings of the Institution of Mechanical Engineers, D: Journal of Automobile Engineering 204 (D2) (1990) 93-101.
• [10] P. Lacki, Theoretical and experimental analysis of the heat exchange in the T-05 machine of ring-block type, TRIBOLOGIA nr 3/2006(207), rok XXXVII, pp. 133-142.
• [11] K. Damaziak, J. Małachowski, K. Sybilski, J. Jachimowicz, Numerical analysis of the interaction area between brake shoes and drum, Górnictwo odkrywkowe, (in Polish) 51 (4) (2010) 84-88.
• [12] P. Baranowski, J. Małachowski, Ł. Mazurkiewicz, Numerical model of the special test rig called IL-68, Górnictwo odkrywkowe (in Polish) 51 (3) (2010) 93-98.
• [13] P. Baranowski, K. Damazik, J. Jachimowicz, J. Małachowski, T. Niezgoda, Numerical study of a special vehicle selected system in respect to improve safety, Modelowanie Inżynierskie, (in Polish) 42 (11) (2011) 19–26.
• [14] A. Yevtushenko, M. Kuciej, Two calculation schemes for determination of thermal stresses due to frictional heating during braking, Journal of Theoretical and Applied Mechanics 48 (3) (2010) 605-621.
• [15] M. Kuciej, Temperatura i naprężenia termiczne w elementach ciernych podczas hamowania.
• [16] P. Lacki, Friction modelling in the bulk metal forming processes, (in Polish). Wydawnictwo Politechniki Częstochowskiej, seria Monografie nr 169, Częstochowa, 2010.
• [17] M. Gierzyńska-Dolna, P. Lacki, Some aspect of modelling of metal forming processes, Computer & Structures 81 (2003) 605-613.