Tearing properties of coated multi-axial warp knitted fabric

• Autorzy: Hu, H. , Xu, Y.
• Języki publikacji: EN

Abstrakty

EN

In this paper, the tearing properties of a multi-axial warp knitted fabric produced with glass filaments and coated with PVC resin are presented. The typical tearing load-extension curves and influences of the different tearing testing conditions are analyzed. The results show that the tearing properties of the coated multi-axial warp fabric are different from those of the coated woven fabrics and that they depend on the tearing directions and tearing methods. The trapezoidal method and tearing tests along diagonal directions give higher resistance against tearing propagation.

Słowa kluczowe

PL

powłoka; wieloosiowe osnowy dziania; metoda rozdzierania

EN

coating; tearing property; multi-axial warp knitting; tearing method

• Czasopismo: Autex Research Journal
• Rocznik: 2008
• Tom: Vol. 8, no. 1
• Strony: 13--16
• Opis fizyczny: Bibliogr. 6 poz.

Twórcy

autor

Hu, H.

• College of Textiles, Donghua University 1882 West Yan An Road, Shanghai 200051, China,

autor

Xu, Y.

• College of Textiles, Donghua University 1882 West Yan An Road, Shanghai 200051, China

Bibliografia

• 1. Jiao W. H., and Chen N. L., Performance Advantages of Biaxial Warp Knitted Fabrics Used as Coated Substrates, Journal of Donghua University, 30 (6), 91-94 (2004).
• 2. Liu R. H., Study on the Mechanical Properties of the Multi-axial Warp Knitted Flexible Composites, Master Thesis, Donghua University (2005).
• 3. Ning Y., Chen Nanliang, A Study on the Tensile Properties of Polyester Multi-axial Warp Knitted Flexible Composites, Technical textile Products, 8, 19-22 (2005).
• 4. Raz S., The Karl Mayer Guide to Technical Textiles, edited by Karl Mayer Textilmaschinenfabrik GmbH, Obertsgausen (2000).
• 5. Sabit A., Wellington Sears Handbook of Industrial Textile, Western Hemisphere by Technomic Publishing Company, Pennysylvania (1995).
• 6. Xu Y., Mechanical Properties of the Directionally Oriented Warp Knitted Flexible Composites, Master Thesis, Donghua University (2006).