Evaluation of microstructure and selected mechanical properties of laser beam welded S690QL high-strength steel

• Autorzy: Tuz, L.
• Języki publikacji: EN

Abstrakty

EN

The paper presents results of microstructure and mechanical properties investigation of laser beam welded high-strength steel. Material for test was non-alloyed steel with yield strength of 690 MPa after quenching and tempering in delivery condition. Research carried out on the butt-welded joints shows fine-grain martensitic-bainitic structure of base metal and in the weld. Investigations of mechanical properties revealed the softened zone in HAZ where the hardness decrease without microstructural changes was observed. Moreover, an influence of softened zone and HAZ width on impact strength was observed where the occurrence of lower hardness led to fracture path deviation phenomenon.

Słowa kluczowe

PL

stal o wysokiej wytrzymałości; mikrostruktura; spawanie laserowe

EN

high-strength steel; microstructure; laser welding

• Czasopismo: Advances in Materials Science
• Rocznik: 2018
• Tom: Vol. 18, nr 3(57)
• Strony: 34--42
• Opis fizyczny: Bibliogr. 12 poz., rys., wykr., tab.

Twórcy

autor

Tuz, L.

• AGH University of Science and Technology in Krakow, Faculty Metals Engineering and Industrial Computer Science, Department of Physical Metallurgy & Powder Metallurgy, Poland,

Bibliografia

• 1. Goss C., Marecki P., Applications of high strength steels in welded structures on the example of XABO 890 and XABO 960 steels, [Zastosowanie stali wysokowytrzymałych w konstrukcjach spawanych na przykładzie stali XABO 890 i XABO 960]; Logistyka, 6 (2014), p. 4122-4129. (In Polish).
• 2. Brezová B., Mäsiar H., Radič P., Welding of high strength materials used in the manufacture of special equipment, University Review, 8, 3-4 (2014), 51-61.
• 3. Löbbe Ch., Hering O., Hiegemann L., Tekkaya A.E., Setting mechanical properties of high strength steels for rapid hot forming processes, Materials, 9 (2016), 229 doi:10.3390/ma9040229.
• 4. Banerjee K., Improving weldability of an advanced high strength steel by design of base metal microstructure; Journal of Materials Processing Technology, 229 (2016), 596–608.
• 5. Nowacki J., Sajek A., Matkowski P., The influence of welding heat input on the microstructure of joints of S1100QL steel in one-pass welding; Archives of Civil and Mechanical Engineering, 16 (2016), 777–783.
• 6. Barsoum Z., Khurshid M., Ultimate strength of welded joints in high strength steels, Procedia Structural Integrity, 5 (2017), 1401-1408.
• 7. K. Pańcikiewicz, L. Tuz, Z. Żurek, Ł. Rakoczy; Optimization of filler metals consumption in the production of welded steel structures; Advanced in Materials Science, 16(1) (2016), p. 27-34; doi: 10.1515/adms-2016-0003
• 8. Pańcikiewicz K., Zielińska-Lipiec A., Tasak E., Cracking of high-strength steel welded joints; Advanced in Materials Science, 13(3) (2013), 76-85; doi: 10.2478/adms-2013-0013.
• 9. Rogalski G., Fydrych D., Łabanowski J., Underwater Wet Repair Welding of API 5L X65M Pipeline Steel, Polish Maritime Research, 24 1 (93) (2017), 188-194; doi: 10.1515/pomr-2017-0038.
• 10. Świerczyńska A., Fydrych D., Rogalski G., Diffusible hydrogen management in underwater wet self-shielded flux cored arc welding, International Journal of Hydrogen Energy, 42(38) (2017), 24532-24540.
• 11. Kurc-Lisiecka A., Lisiecki A., Laser welding of the new grade of advanced high-strength steel Domex 960, Materiali in tehnologije / Materials and technology, 51(2) (2017), 199–204; doi:10.17222/mit.2015.158.
• 12. Kurc-Lisiecka A., Piwnik J., Lisiecki A., Laser welding of new grade of advanced high strength steel STRENX 1100 MC, Archives of Metallurgy Materials, 62(3) (2017), 1651-1657; doi: 10.1515/amm-2017-0253.

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).

Identyfikatory

DOI

10.1515/adms-2017-0039