Evaluation of the weavability of sized cotton warps

• Autorzy: Maatoug, S. , Ladhari, N. , Sakli, F.
• Języki publikacji: EN

Abstrakty

EN

In weaving, a warp must withstand repeated stretching, caused by shedding and beat-up. It is also subjected to abrasion, which is mainly due to shedding and reed motion. The yarns are therefore sized. Two important reasons for applying sizes to spun warp yarns are to protect them breaking during weaving and to decrease their hairyness so that the tendency for adjacent warp yarns to entangle will be reduced. In this work, we investigated the weaving performance and physical properties of cotton yarn sized at high pressure squeezing. We studied the size penetration, film properties, and the yarn packing density in order to explain the performance of sized yarn.

Słowa kluczowe

PL

przędza bawełniana; rozmiar; przyczepność; spójność; siła zrywająca

EN

cotton yarns; sizing; adherence; cohesion; breaking force; weavability

• Czasopismo: Autex Research Journal
• Rocznik: 2007
• Tom: Vol. 7, no. 4
• Strony: 239--244
• Opis fizyczny: Bibliogr. 9 poz.

Twórcy

autor

Maatoug, S.

• Textile Research Unit. Ksar Hellal,

autor

Ladhari, N.

• High Technology Institute, Ksar Hellal, Tunisia

autor

Sakli, F.

• Hadj Ali Soua, 5070 Ksar Hellal, Tunisia Phone: + 216 73 475 900, Fax: + 216 73 475 163

Bibliografia

• 1. Behera B.K., Ph. D. Thesis, IIT Delhi, 1989.
• 2. Dolecki S.K., “Humidity, Size Content, and Warp Breakage Rates of Spun Yarns”, Text.Manf., 4, 1971, 144.
• 3. Dolecki S.K., “Causes of Warp Breaks in the Weaving of Spun Yarns”, J. Text. Inst., 65,1974, T 68.
• 4. Faasen N.J., and Harten K.V., “The Effect of Sizing on the Weavability of Cotton Yarns”, J.Text. Inst., 57, 7, 1966, T 269.
• 5. Hari P.K., Subramanian T.A. & Aggarwal S.K., “Weavability-Dependence on Yarn Quality and Sizing”, Text. Asia, 2, 1987 A, 16.
• 6. Hari P.K., Subramanian T.A., & Aggarwal S.K., “Contribution of Yarn Quality and Sizing to Weavability”, Melliand Textilberichte, 68, 4, 1987 B, E 109.
• 7. Heap V., & Bradford B.A., “The Correlation Between Abrasion Resistance and Weavability of Sizing Warps”, Melliand Textilberichte., 69, 1, 1988, E 12.
• 8. Slauson S.D., Miller B., & Rebenfeld L., “Physicochemical Properties of Sized Yarns Part I: Initial Studies”, Text. Res. J., 10, 1984, 655.
• 9. Trauter J., “Optimizing the Processing of Yarns with Modified Raw Material Properties”, Melliand Textilberichte, 69, 3, 1989 B, E 92.