Rapid prototyping and tooth contact analysis of eccentric cycloid gear mesh

• Autorzy: Batsch, Michał
• Języki publikacji: EN

Abstrakty

EN

This paper presents a mathematical model and tooth contact analysis of eccentric cycloid gear mesh. Numerical simulations aimed at generating contact pattern for a sample gear pair were performed. Contact pattern was also determined for gear wheels made by additive fabrication from transparent light-activated resin.

Słowa kluczowe

EN

tooth contact analysis; eccentric cycloid gear engagement; rapid prototyping

• Czasopismo: Journal of KONBiN
• Rocznik: 2019
• Tom: Vol. 49, iss. 1
• Strony: 369--382
• Opis fizyczny: Bibliogr. 15 poz., rys., tab.

Twórcy

autor

Batsch, Michał

• Rzeszów University of Technology (Politechnika Rzeszowska)

Bibliografia

• 1. Batsch M., Homik W., Markowski T.: Cylindrical Gears with Increased Contact Area-Proposal of Application in Watercrafts Power Transmission Systems. Solid State Phenomena, Vol. 236, 2015.
• 2. Batsch M., Markowski T., Legutko S. et al.: Measurement and mathematical model of convexo-concave Novikov gear mesh, Measurement, Vol. 125, 2018.
• 3. Batsch M., Markowski T.: Comparative fatigue testing of gears with involute and convexo-concave teeth profiles. Advances in Manufacturing Science and Technology, Vol. 40, No. 2, 2016.
• 4. Batsch M.: The Method of Axes Distance Error Compensation in Convexo-Concave Novikov Gears. Advances in Manufacturing Science and Technology, Vol. 39, No. 4, 2015.
• 5. Dyson A., Evans H.P., Snidle W., Wildhaber-Novikov circular arc gears: Geometry and Kinematics. Proceedings of The Royal Society A Mathematical Physical and Engineering Sciences, Vol. 403, No. 1825, 1986.
• 6. Kamchatnyi S.A., Kuznetsov V.M., Skovorodin A.V. et al.: Mathematical simulation of the formbuilding of the conic driving gear details with EC-gearing. Vestn. Tomsk. Gos. Univ. Mat. Mekh., Vol. 2, No. 28, 2014.
• 7. Kawalec A., Wiktor J.: Simulation of generation and tooth contact analysis of helical gears with crowned flanks. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 222, No. 9, 2008.
• 8. Li X., Li C., Chen B. et al.: Design and investigation of a cycloid helical gear drive. Journal of Mechanical Science and Technology, Vol. 31, No. 9, 2017.
• 9. Litvin F.L., Fuentes A., Gonzalez-Perez I. et al.: New version of Novikov-Wildhaber helical gears: computerized design, simulation of meshing and stress analysis. Computer Methods in Applied Mechanics and Engineering, Vol. 191, No. 49-50, 2002.
• 10. Rokicki P., Dychtoń K., Drajewicz M. et al.: Thermal analysis of low alloyed steel for heavily-loaded aircraft engine transmission gears. Advances in Manufacturing Science and Technology, Vol. 39, No. 3, 2015.
• 11. Rokicki P., Dychtoń K., Nowotnik A. et al.: Determination of heat treatment parameters for heavily-loaded aircraft engine components. Journal of KONES, Vol. 20, No. 2, 2013.
• 12. Sobolak M., Budzik G.: Experimental method of tooth contact analysis (TCA) with rapid prototyping (RP) use, Rapid Prototyping Journal, Vol. 14, No. 4, 2008.
• 13. Sobolak, M., Experimental method of tooth contact analysis (TCA) in toothed gear, Archives of Mechanical Technology and Automation, Vol. 27, No. 2, 2007.
• 14. Stanovskoy V.V., Kazakyavichyus S.M., Kuznetsov В.М.: Razrabotka i vniedreniye rеsursosberegayushchеy techniki novogo pokoleniya na osnove excentricovo-cicloidalogo (EC) zacepleniya, Innovatsii, Vol. 12, No. 182, 2013.
• 15. Stanovskoy V.V., Kazakyavichyus S.M., Remneva T.A. et al.: US Patent No. 8,789,437 B2, 2014.

Identyfikatory

DOI

10.2478/jok-2019-0019