Determining the applicability of liquid alloy nitriding in fabrication of Al-AlN particle composites

• Autorzy: Śleziona, J. , Dyzia, M.
• Języki publikacji: EN

Abstrakty

EN

One of the possible techniques of the fabrication of dispersion-hardened composites is by in situ reaction between the liquid alloy and gas. The study presents the results of the research on nitriding of liquid aluminium alloy containing Mg and Ti as alloying elements under the conditions of high pressure comprised in the range of 150-1000hPa at the temperature of up to 1100oC. It has been stated that under the applied conditions of the synthesis it is possible to obtain the AlN nitride, but it is formed on the liquid alloy surface and as a deposit on the surface of the crucible. Some results of the analysis of the phase constitution obtained in the fabricated products were presented along with the structure of these products.

Słowa kluczowe

PL

stopy aluminium; kompozyty in situ; azotek aluminium; utwardzanie dyspersyjne

EN

aluminium alloys; in situ composites; aluminium nitride

• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2008
• Tom: Vol. 8, iss. 3s
• Strony: 134--138
• Opis fizyczny: Bibliogr. 8 poz., rys., tab., wykr.

Twórcy

autor

Śleziona, J.

• Silesian University of Technology, Faculty of Materials Science and Metallurgy, Department of Alloys and Composite Materials Technology Str. Krasińskiego 8, 40-019 Katowice, Poland,

autor

Dyzia, M.

• Silesian University of Technology, Faculty of Materials Science and Metallurgy, Department of Alloys and Composite Materials Technology Str. Krasińskiego 8, 40-019 Katowice, Poland

Bibliografia

• [1] S.C. Tjong, Z.Y. Ma: Microstructural and mechanical characteristics of in situ metal matrix composites, Mat. Sc. Engineering, 29, (2000), 49-113.
• [2] Q. Hou, R. Muthharasan, M.J. Koczak: Feasibility of aluminium nitride formation in aluminium alloys, Materials Science and Engineering, 195 A, (1995), 121 – 129.
• [3] Y. Kagawa, S.C. Khatri, M.J. Koczak: Directed nitridation of liquid aluminium alloy: growth process and modelling, Ceram. Eng. Sci. Proc., 14 (1993), 776 – 781.
• [4] H. LeHuy, S. Dallarie: Effects of Si and Mg dopants on the kinetics of aluminium alloys nitridation, [5].Pros. Ceramic and Metal Matrix Composites, Pergamon Press, New York, (1989), 302 – 311.
• [5] H. Scholz, P. Greil: Nitridation reactions of molten Al-(Mg, Si) alloys, J. Mater. Sci., 26 (1991), 669 – 677.
• [6] A. Schweghofer, S. Kudela: High pressure nitrided of AlMg alloys, Kovove Materialy, 15, (1977), 257 –268.
• [7] T.B. Sercombe, G.B. Schaffer: On the role of magnesium and nitrogen in the infiltration of aluminium by aluminium for rapid prototyping applications, Acta Materialia, 2004, (52).
• [8] M. Dyzia, J. Śleziona: Aluminium matrix composites dispersion reinforced with nitride phases, Kompozyty (Composites) nr 8: 3, 2008, str. 269-273 (in Polish).