Microstructure and mechanical properties of HR3C austenitic steel after service

• Autorzy: Golański, G. , Kolan, C. , Zieliński, A. , Klimaszewska, K. , Merda, A. , Sroka, M. , Kłosowicz, J.
• Języki publikacji: EN

Abstrakty

EN

Purpose: The purpose of the investigations was to determine changes in the microstructure and mechanical properties of HR3C creep resisting austenitic steel after service. Design/methodology/approach: The investigations were performed on test specimens taken from a part of the steam superheater tube. The range of the investigations included: microstructural investigations - light and SEM microscope; analysis of precipitates - carbide isolates; investigations of mechanical properties - hardness measurement, static tensile test, impact test. Findings: The precipitation processes at the grain boundaries lead to increase in intergranular corrosion of the HR3C steel resulting in loss of grains in the structure. The impact strength testing on test specimens with reduced width may result in overestimation of crack resistance of the material after service. Research limitations/implications: The comprehensive analysis of precipitation processes requires TEM examinations. Finding the correlation between the impact strength determined on standard vs. non-standard test specimens with reduced width. Practical implications: The obtained results of investigations are used in industrial practice for diagnosis of pressure parts of power boilers. Test procedures developed based on comprehensive materials testing conducted under laboratory conditions are used in upgrading and design of pressure parts of steam boilers. The results of investigations are also the element of database of the materials characteristics of steels and alloys as well as welded joints made of them working under creep conditions developed by the Institute for Ferrous Metallurgy. Originality/value: The results and analysis of the investigations of microstructure and mechanical properties of HR3C steel after service under actual boiler conditions are presented.

Słowa kluczowe

PL

stal HR3C; mikrostruktura; właściwości mechaniczne

EN

HR3C steel; microstructure; mechanical properties

• Czasopismo: Archives of Materials Science and Engineering
• Rocznik: 2016
• Tom: Vol. 81, nr 2
• Strony: 62--67
• Opis fizyczny: Bibliogr. 24 poz.

Twórcy

autor

Golański, G.

• Institute of Materials Engineering, Czestochowa University of Technology, Al. Armii Krajowej 19, 42-200 Częstochowa, Poland,

autor

Kolan, C.

• Institute of Materials Engineering, Czestochowa University of Technology, Al. Armii Krajowej 19, 42-200 Częstochowa, Poland

autor

Zieliński, A.

• Institute for Ferrous Metallurgy, K. Miarki 12-14, 44-100 Gliwice, Poland

autor

Klimaszewska, K.

• Institute of Materials Engineering, Czestochowa University of Technology, Al. Armii Krajowej 19, 42-200 Częstochowa, Poland

autor

Merda, A.

• Institute of Materials Engineering, Czestochowa University of Technology, Al. Armii Krajowej 19, 42-200 Częstochowa, Poland

autor

Sroka, M.

• Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44 100 Gliwice, Poland

autor

Kłosowicz, J.

• Institute of Materials Engineering, Czestochowa University of Technology, Al. Armii Krajowej 19, 42-200 Częstochowa, Poland

Bibliografia

• [1] A. Zieliński, Austenitic steels for boiler elements in USC power plant, Journal of Achievements of Materials and Manufacturing Engineering 57 (2013) 68-75.
• [2] A. Zieliński, G. Golański, M. Sroka, J. Dobrzański, Estimation of long-term creep strength in austenitic power plant steels, Materials Science and Technology 32/8 (2016) 780-785.
• [3] Ch. Chi, H. Yu, X. Xie, Advanced Austenitic HeatResistant Steels for Ultra-Super-Critical (USC) Fossil Power Plants, Alloy steel - properties and use, InTech Publisher, 2011, 171-201.
• [4] J. Liu, D. Jiao, C. Luo, Microstructural evolution in austenitic heat-resistant cast steel 35Cr25Ni12NNbRE duration long-term service, Materials Science and Engineering A 527 (2010) 2772-2779.
• [5] T. Sourmail Precipitation in creep resistant austenitic stainless steel, Materials Science and Technology 14 (2001) 1-14.
• [6] B. Peng, H. Zhang, J. Hong, J. Gao, H. Zhang, J. Li, Q. Wang, The evolution of precipitates of 22Cr-25NiMo-Nb-N heat-resistant austenitic steal in long-term creep, Materials Science and Engineering A 527 (2010) 4424-4430.
• [7] B. Wang, Z.-D. Liu, S.-Ch. Cheng, Ch.-M. Liu, J.-Z. Wang, Microstructure evolution and mechanical properties of HR3C steel during long-term Aging at high Temperature, Journal of Iron and Steel Research International 21/8 (2014) 765-773.
• [8] J.Z. Wang, Z.D. Liu, H.S. Bao, S.C. Cheng, Evolution of precipitates of S31042 heat resistant steel during 700°C aging, Journal of Iron and Steel Research, International 20/10 (2013) 113-121.
• [9] A. Iseda, H. Okada, H. Semba, M. Igarashi, Long term creep properties and microstructure of SUPER304H, TP347HFG and HR3C for A-USC boilers, Energy Materials 2/4 (2007) 199-206.
• [10] A. Zieliński, J. Dobrzański, M. Sroka, Changes in the structure of VM12 steel after being exposed to creep conditions, Archives of Materials Science and Engineering 49/2 (2011) 103-111.
• [11] M. Sroka, A. Zieliński, Matrix replica method and artificial neural networks as a component of condition assessment of materials for the power industry, Archives of Materials Science and Engineering 58/2 (2012) 130-136.
• [12] PN-EN ISO 643:2012 Steels - Micrographic determination of the apparent grain size.
• [13] G. Golański, A.K. Lis, J. Słania, A. Zieliński Microstructural aspect of long term service of the austenitic TP347HFG stainless steel, Archives of Metallurgy and Materials 60 (2015) 2091-2094.
• [14] Ch. Solenthaler, M. Ramesh, P.J. Uggowitzer, R. Spolenak, Precipitation strengthening of Nb-stabilized TP347 austenitic steels by a dispersion of secondary Nb(C,N) formed upon a short-term hardening heat treatment, Materials Science and Engineering A 647 (2015) 294-302.
• [15] J. Erneman, M. Schwind, H.-O. Andrén, J.-O. Nilsson, A. Wilson, J. Ågren, The evolution of primary and secondary niobium carbonitrides in AISI 347 stainless steel during manufacturing and long-term ageing Acta Materialia 54 (2006) 67-76.
• [16] A.F. Padilha, P.R. Rios, Decomposition of austenite in austenitic stainless steels, ISIJ International 42/4 (2002) 325-337.
• [17] Y.H. Zhou, Ch.X. Liu, Y.Ch. Liu, Q.Y. Guo, H.J. Li, Coarsening behavior of MX carbonitrides in type 347H heat-resistant austenitic steel during thermal aging, International Journal of Minerals, Metallurgy and Materials 23/3 (2016) 283-293.
• [18] H. Tanaka, M. Murata, F. Abe, H. Irie, Microstructural evolution and change in hardness in type 304H stainless steel during long-term creep, Materials Science and Engineering A 319/321 (2001) 788-791.
• [19] J.K. L. Lai, A Review of precipitation behaviour in AISI Type 316 stainless steel, Materials Science and Engineering 61 (1983) 101-109.
• [20] B. Peng, H. Zhang, J. Hong, J. Gao, Q. Wang, H. Zhang, Effect of aging on the impact toughness of 25Cr-20Nr-Nb-N steel, Materials Science and Engineering A 527 (2010) 1957-1961.
• [21] K. Kaneko, T. Futunaga, K. Yamada, N. Nakada, M. Kikuchi, Z. Saghi, J.S. Barnad, P.A. Midgley, Formation of M23 C6 - type precipitates and chromium -depleted zone in austenite stainless steel, Scripta Materialia 65 (2011) 509-512.
• [22] G. Stradomski Methodology problems of using PN - EN ISO 148-1:2010 standard, Proceedings of the 15th International Scientific Conference, New Technologies and Achievements in Metallurgy, Material engineering and productions engineering, Częstochowa, 2014, 378 -381.
• [23] Data Sheet HR3C Nippon Steel & Sumitomo Metal 2013.
• [24] PN-EN 10216-2 Seamless steel tubes for pressure purposes - Technical delivery conditions. Non - alloy and alloy steel tubes with specified elevated temperature properties.

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).

Identyfikatory

DOI

10.5604/01.3001.0009.7100