Archives of Civil and Mechanical Engineering - Tom Vol. 23, no. 2 (2023) - Biblioteka Nauki - Yadda

Nowa wersja platformy, zawierająca wyłącznie zasoby pełnotekstowe, jest już dostępna.
Przejdź na https://bibliotekanauki.pl

Tom - szczegóły

Tytuł artykułu

Vol. 23, no. 2

Czasopismo

Archives of Civil and Mechanical Engineering

Wydawca

Rocznik

2023

Identyfikatory

Zawartość wolumenu

Vol. 23, no. 2
- artykuł: Seismic performance of concrete columns confined by high‑strength stirrups (Hou C., Zheng W., Liu P., Wang Q., Qi S.), s. art. no. e69, 2023
- artykuł: Effect of corrosion on the buckling behaviour of cold‑formed steel channel section columns under axial compression (Nie B., Xu S., Chen H., Wang Y.), s. art. no. e70, 2023
- artykuł: Anti‑impact and vibration‑damping design of cork‑based sandwich structures for low‑speed aerial vehicles (Sheikhi M. R., Gürgen S., Altuntas O., Sofuoğlu M. A.), s. art. no. e71, 2023
- artykuł: Mechanical behavior of laminated bamboo-timber composite columns under axial compression (Chen S., Wei Y., Wang G., Zhao K., Ding M.), s. art. no. e72, 2023
- artykuł: Selection of casting production parameters with the use of machine learning and data supplementation methods in order to obtain products with the assumed parameters (Wilk-Kołodziejczyk D., Pirowski Z., Bitka A., Wróbel K., Śnieżyński B., Doroszewski M., Jaśkowiec K., Małysza M.), s. art. no. e73, 2023
- artykuł: Deformation and failure laws and acoustic emission characteristics of low‑strength molybdenum ore (Zhao K., Yang J., Song Y., Wang Q., Zhao K., Ji Y.), s. art. no. e74, 2023
- artykuł: A novel model for determining the strength and fracture parameters of Q235 steel using double symmetrical edges notched specimens (Han R., Meng W., Guan J., Hao Y., Yao X., Li L., He S.), s. art. no. e75, 2023
- artykuł: Analysis of seismic damage features of HSR CRTS III SBT simply supported bridge system (Liu L., Jiang L., Zhou W., Liu X., Feng Y.), s. art. no. e76, 2023
- artykuł: A novel composite joint with corrugated web and cover plates for simultaneously improving anti‑collapse resistance and seismic behavior (Wang J.-X., Wang W.-Q., Gao S.), s. art. no. e77, 2023
- artykuł: Development of mechanical properties and microstructure for Al-Zn-Mg-Cu alloys through ECAP after optimizing the outer corner angles through FE modeling (Ghosh A., Das K., Eivani A. R., Mohammadi H., Vafaeenezhad H., Murmu U. K., Jafarian H. R., Ghosh M.), s. art. no. e78, 2023
- artykuł: Structural stability of thin-walled austempered ductile iron castings (Górny M., Gondek Ł., Angella G., Tyrała E., Kawalec M., Bitka A.), s. art. no. e79, 2023
- artykuł: Effect of chromium doping on the structure and mechanical properties of anti‑wear TiB2 coatings (Cieniek Ł., Chudzik-Poliszak E., Moskalewicz T., Kopia A., Smolik J.), s. art. no. e80, 2023
- artykuł: Structure-property relationships and corrosion behavior of laser‑welded X‑70/UNS S32750 dissimilar joint (Maurya A. K., Pandey S. M., Chhibber R., Pandey C.), s. art. no. e81, 2023
- artykuł: Effects of the distribution of solid particles on the rheological properties and buildability of 3DPM fresh pastes with different FA/GGBFS content (Xu Z., Zhang D., Li H., Sun X.), s. art. no. e82, 2023
- artykuł: Effect of water-cement ratio on the electromagnetic shielding performance of C3S paste cured long-term (Liu Y., Li Y., Jin C., Mu J.), s. art. no. e83, 2023
- artykuł: Reinforcement of compatibilized nanoclay/Inviya fibers to epoxy‑based glass fiber nanocomposites for high‑impact strength applications (Shelly D., Nanda T., Mehta R.), s. art. no. e84, 2023
- artykuł: Nonlinear forced vibration analysis of micro-rotating shaft-disk systems through a formulation based on the nonlocal strain gradient theory (Panahi R., Asghari M., Borjalilou V.), s. art. no. e85, 2023
- artykuł: Evolution of δ phase precipitates in Inconel 625 superalloy additively manufactured by laser powder bed fusion and its modeling with fuzzy logic (Staroń S., Macioł P., Dubiel B., Gola K., Falkus J.), s. art. no. e86, 2023
- artykuł: Predicting the microstructure of compacted graphite iron using a fuzzy knowledge‑based system (Gumienny G., Macioł A., Macioł P.), s. art. no. e87, 2023
- artykuł: Investigation of longitudinal bending distortion of a double-side edge welded fin plate by study of plastic zones (Sudharsanam V., Narayanan C. S., Shanmugarajan B., Prakash L.), s. art. no. e88, 2023
- artykuł: Microstructure, mechanical and thermal properties of YSZ thermal barrier coatings deposited by axial suspension plasma spraying (Poliarus O., Morgiel J., Żórawski W., Góral A., Pomorska M., Wojciechowski K. T., Cherniushok O.), s. art. no., e89, 2023
- artykuł: Nonlocal strain gradient-based nonlinear in-plane thermomechanical stability of FG multilayer micro/nano-arches (Yang Z., Hurdoganoglu D., Sahmani S., Nuhu A. A., Safaei B.), s. art. no. e90, 2023
- artykuł: Effect of the addition of basalt fiber on life-cycle anti-cracking behavior of concrete (Li Y., Shen A., Guo Y.), s. art. no. e92, 2023
- artykuł: Effects of shear panel dampers on seismic response mitigation of high-speed railway simply supported bridge-track system under far-field and near-field ground motions (Jiang L., Yu K., Jiang L., Wen T., Hu Y., Pang L.), s. art. no. e93, 2023
- artykuł: Machine learning-based seismic response and performance assessment of reinforced concrete buildings (Kazemi F., Asgarkhani N., Jankowski R.), s. art. no. e94, 2023
- artykuł: Bond behavior of corroded reinforcements in concrete: an experimental study and hysteresis model (Zhang Y. B., Zheng S.-S., Dong L.-G., Zheng Y.), s. art. no. e95, 2023
- artykuł: Fundamentals and advances of wire arc additive manufacturing: materials, process parameters, potential applications, and future trends (Saleh B., Fathi R., Tian Y., Radhika N., Jiang J., Ma A.), s. art. no. e96, 2023
- artykuł: Nonlinear resonance of axially moving graphene platelet-reinforced metal foam cylindrical shells with geometric imperfection (Ding H.-X., She G.-L.), s. art. no. e97, 2023
- artykuł: Effect of pre-formed martensite quenching plus inverted multi‑step heat treatment on medium-carbon alloy steel (Chen G., Lei M., Wan M., Huang C.), s. art. no. e99, 2023
- artykuł: Thermoelastic vibration characteristics of asymmetric annular porous reinforced with nano-fillers microplates embedded in an elastic medium: CNTs Vs. GNPs (Arshid E., Amir S., Loghman A.), s. art. no. e100, 2023
- artykuł: Experimental and numerical investigation of an arch-beam joint for an arch bridge (Yang Y., Lin B., Zhang W.), s. art. no. e101, 2023
- artykuł: Forging of PM Ti-6Al-4V alloy at the temperature above β-transus and high strain rate: modeling and trials in industrial conditions (Wojtaszek M., Zyguła K., Łukaszek-Sołek A., Jabłońska M., Stanik R., Gude M.), s. art. no. e102, 2023
- artykuł: Influence of textile grid forms on tensile mechanical behaviors of carbon textile-reinforced composites with polyethylene (PE) short fibers (Wu Z., Deng M., Tian T., Dong Z., Sun Y., Zhang W.), s. art. no. e103, 2023
- artykuł: Seismic behavior of precast concrete coupled shear walls with yielding-based and friction-based coupling beams (Fang Q., Sun J., Qiu H., Dal Lago B., Chen W.), s. art. no. e104, 2023
- artykuł: On the significance of intercritical annealing time in governing mechanical properties of lean composition dual-phase steel (Khorasani F., Jamaati R., Aval H. J.), s. art. no. e105, 2023
- artykuł: A design method for seismic retrofit of reinforced concrete frame buildings using aluminum shear panels (Ferraioli M., Lavino A., De Matteis G.), s. art. no. e106, 2023
- artykuł: Effect of magnetic water on properties of slag-based geopolymer composites incorporating ceramic tile waste from construction and demolition waste (Sevim O., Alakara E. H., Demir I., Bayer I. R.), s. art. no. e107, 2023
- artykuł: Flexural performance of prefabricated U‑shaped UHPC permanent formwork-concrete composite beams reinforced with FRP bars (Ge W., Zhang Z., Ashour A., Guan Z., Jiang H., Sun C., Qiu L., Yao S., Cao D.), s. art. no. e108, 2023
- artykuł: Probabilistic finite element analysis of failures in concrete dams with large asperities in the rock-concrete interface (Ulfberg A., Gonzalez-Libreros J., Das O., Bista D., Westberg Wilde M., Johansson F., Sas G.), s. art. no. e109, 2023
- artykuł: The effect of post-bond solution treatment and double aging on the microstructural evolution and mechanical properties of TLP-bonded IN718 joint (Tarai U. K., Pal S., Robi P. S.), s. art. no. e110, 2023
- artykuł: Investigating the influence of NaCl concentration on the electrochemical corrosion behavior of metal oxide reinforced magnesium matrix composites (Gnanavelbabu A., Vinothkumar E., Ross N. S., Rai R., Kuntoğlu M.), s. art. no. e113, 2023
- artykuł: Geometrical parameters and strength of clinching joint formed with the use of an additional rivet (Mucha J., Boda Ł., Witkowski W.), s. art. no. e114, 2023
- artykuł: Stress evolution of rock breakages by a disc cutter assisted by pre-cuts (Liu J., Chen W., Liu T., Peng D.), s. art. no. e115, 2023
- artykuł: Effect of alkaline treatment on mechanical properties of palmyra and S-glass fiber reinforced epoxy nanocomposites (Sravya N. P., Sivaganesan S., Venkatesh R., Manikandan R.), s. art. no. e116, 2023
- artykuł: Investigation on the effect of silane coupling agent treatment of steel fibers on the durability of UHPC (Du S., Luan C., Yuan L., Du P., Zhou Z., Wang J.), s. art. no. e118, 2023
- artykuł: The role of the strengthening phases on the HAZ liquation cracking in a cast Ni‑based superalloy used in industrial gas turbines (Rakoczy Ł., Grudzień-Rakoczy M., Rutkowski B., Cygan R., Hanning F., Cios G., Habisch S., Andersson J., Mayr P., Zielińska-Lipiec A.), s. art. no. e119, 2023
- artykuł: Evolution of zinc coatings during drawing process of steel wires (Suliga M., Wartacz R., Hawryluk M.), s. art. no. e120, 2023
- artykuł: Improvement of the method for increasing roughness of asphalt and cement‑concrete surfaces of highways and airfields (Yang S., Krayushkina K., Skrypchenko O., Ji J., Bieliatynskyi A.), s. art. no. e121, 2023
- artykuł: Basic performance, heavy metal leaching mechanism and risk assessment analysis of waste concrete (Wang C.-q., Cheng L.-x., Huang Q.-c., Shui Z.-h., Liu Y.-y., Zhao H., Zhang Z.-j.), s. art. no. e122, 2023
- artykuł: Development of hybrid performance‑based optimization algorithm for structures equipped with vibration damper devices (Ayyash A. j. N. A., Hejazi F.), s. art. no. e123, 2023
- artykuł: Modeling and analysis of tangential force in robot abrasive belt grinding of nickel‑based superalloy (Zhang W., Gong Y., Zhao X., Xu Y., Li X., Yin G., Zhao J.), s. art. no. e124, 2023
- artykuł: Effect of number of tool shoulders on the quality of steel to magnesium alloy dissimilar friction stir welds (Khalaf H. I., Al-Sabur R., Derazkola H. A.), s. art. no. e125, 2023
- artykuł: Subsurface deformation and burr formation in nickel-based single-crystal superalloy under grinding (Liang C., Gong Y., Li P., Sun J., Jin L., Yin G., Wen X., Bo X.), s. art. no. e126, 2023
- artykuł: Research on piezoresistive effect and random model of carbon fiber bundle (Gong Y., Xie Z., Liu J., Chen G., Zhang D.), s. art. no. e128, 2023
- artykuł: Effectiveness of nano-SiO2 on the mechanical, durability, and microstructural behavior of geopolymer concrete at different curing ages (Ahmed H. U., Mohammed A. A., Mohammed A. S.), s. art. no. e129, 2023
- artykuł: Comparison of mechanical properties and structure of Haynes 282 consolidated via two different powder metallurgy methods: laser powder bed fusion and hot pressing (Maj P., Bochenek K., Sitek R., Koralnik M., Jonak K., Wieczorek M., Pakieła Z., Mizera J.), s. art. no. e130, 2023
- artykuł: Experimental and theoretical investigation of the shear lag effect in the novel non‑prismatic prestressed CSW-UHPC composite box girders (Li H., Li L., Yoo D.-Y., Ye M., Zhou C., Shao X.), s. art. no. e132, 2023
- artykuł: A comprehensive review of graphene‑based aerogels for biomedical applications. The impact of synthesis parameters onto material microstructure and porosity (Trembecka-Wójciga K., Sobczak J. J., Sobczak N.), s. art. no. e133, 2023
- artykuł: Effect of the conversion of the plastic deformation work to heat on the behaviour of TWIP steels: a review (Jabłońska M.), s. art. no. e135, 2023
- artykuł: Effects of primary sintering on microstructure and properties of friction stir back extruded Cu-Ti2SnC wire composite (Jahani A., Jamshidi Aval H., Rajabi M., Jamaati R.), s. art. no. e136, 2023
- artykuł: Concurrent effects of the shear-lag and warping torsion on the performance of non-rectangular RC shear walls (Tabiee M., Abdoos H., Khaloo A.), s. art. no. e138, 2023
- artykuł: Study on damage mechanism of concrete under water jet combined with mechanical breaking (Liu J., Ling J., Cai Y., Ju A., Long W., Zhang X.), s. art. no. e139,2023
- artykuł: Microstructure and properties of AlCr and AlCrFe coatings deposited by magnetron sputtering (Ura-Bińczyk E., Kulikowski K., Chromiński W., Smolik J., Lewandowska M.), s. art. no. e140, 2023

rozwiń roczniki

JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.