Application of the Python programming language in automating the Elmer computations

• Autorzy: Kucharski, D. , Wesołowski, M. , Niedbała, R. , Hauser, J.
• Języki publikacji: EN

Abstrakty

EN

In the article, the usage of Python programming language for controlling and automatically running the calculation procedure is presented. Calculations were conducted on a large number of models, obtained by modifying the same geometric object. Three numerical simulations of thermal phenomena made in the Elmer program are presented. Io the article, two-dimensional model of the underfloor heating system is used to present the possibilities of proposed solution.

Słowa kluczowe

PL

język programowania Python; obliczenia Elmer; procedura obliczeniowa; system ogrzewania podłogowego

EN

Python programming language; Elmer computations; calculation procedure; underfloor heating system

• Czasopismo: Poznan University of Technology Academic Journals. Electrical Engineering
• Rocznik: 2011
• Tom: No. 65
• Strony: 123--128
• Opis fizyczny: Bibliogr. 5 poz., rys.

Twórcy

autor

Kucharski, D.

• Warsaw University of Technology

autor

Wesołowski, M.

• Warsaw University of Technology

autor

Niedbała, R.

• Warsaw University of Technology

autor

Hauser, J.

• Poznan University of Technology

Bibliografia

• [1] Elmer finite element software http://www.csc.fi/english/pages/elmer Elmer's page, access date 31.01.2011.
• [2] Geuzaine C, Remacle J.-F. Gmsh: a three-dimensional finite element generator with built-in pre- and post-processing facilities. International Journal Numerical Methods in Engineering, Volume 79, Issue 11, pages 1309-1331, 2009
• [3] Karadag R., Teke I., Bulut H., A numerical investigation on effects of ceiling floor surface temperatures and room dimensions on the Nusselt number for a floor heating system, International Communications in Heat and Mass Transfer 34 (2001 979-988.
• [4] Kucharski D., Niedbała R: Wpływ parametrów materiałowych zewnętrznych przegród budowlanych na ogrzewanie pomieszczeń Przegląd Elektrotechniczny 3/2007, str 97-99, Sigma-NOT 2007.
• [5] Kucharski D., Wesołowski M., Niedbała R., Hauser J.: Numerical Model Underfloor Heating System Using CFD Procedures with Elmer Software. Compumter Application in Electrical Engineering, Post-conference Monograph ZkwE'2010, ed. R. Nawrowski, Institute of Electrical Engineering and Electronics, Poznań Univ of Technology, pp. 174-184.