Cutting capacity and wear resistance of Cr2O3-AlN nanocomposite ceramic obtained by field activated sintering technique (FAST)

• Autorzy: Lavrynenko, S. , Gevorkyan, E. , Kucharczyk, W. , Chalko, L. , Rucki, M.
• Języki publikacji: EN

Abstrakty

EN

Chromium oxide ceramics may be considered as a new generation of ceramic materials for cutting tools with considerably improved high speed cutting performance. The present work is focused on the development of Cr2O3 nanocomposite materials fabricated with the Field Activated Sintering Technique (FAST). The main objective of the proposed work is to study the influence of electric field on the densification process during FAST sintering of the materials in the Cr2O3-AlN system with nanosize microstructure. Additional objectives are to characterize mechanical properties of the obtained Cr2O3 ceramics. The work aimed to develop composite materials based on Cr2O3-based nanoparticles for cutting, then to check their cutting properties and to work out the recommendations for their use for processing of various materials, accordingly.

Słowa kluczowe

PL

nanokompozyty ceramiczne; zdolność cięcia; zużycie

EN

nanocomposite ceramic; cutting capacity; wear

• Czasopismo: Advances in Materials Science
• Rocznik: 2018
• Tom: Vol. 18, nr 3(57)
• Strony: 15--21
• Opis fizyczny: Bibliogr. 22 poz., rys., tab.

Twórcy

autor

Lavrynenko, S.

• National Technical University "Kh.P.I.", Information Technology & Systems KGM Dept. Kirpichova Street 2, Kharkov 61002 Ukraine

autor

Gevorkyan, E.

• Ukrainian State Academy of Railway Transport, Mechanical Department, Feyerbakh sq. 7, Kharkov 61001, Ukraine

autor

Kucharczyk, W.

• Kazimierz Pulaski University of Technology and Humanities in Radom, Faculty of Mechanical Engineering, ul. Krasickiego 54 B1, 26-600 Radom, Poland

autor

Chalko, L.

• Kazimierz Pulaski University of Technology and Humanities in Radom, Faculty of Mechanical Engineering, ul. Krasickiego 54 B1, 26-600 Radom, Poland

autor

Rucki, M.

• Kazimierz Pulaski University of Technology and Humanities in Radom, Faculty of Mechanical Engineering, ul. Krasickiego 54 B1, 26-600 Radom, Poland,

Bibliografia

• 1. Wegener K., Kuster F., Weikert S., Weiss L., Stirnimann J.: Success Story Cutting. Procedia CIRP, 46 (2016) 512–524.
• 2. Huang X., Etsion I., Shao T.: Effects of elastic modulus mismatch between coating and substrate on the friction and wear properties of TiN and TiAlN coating systems. Wear, 338-339 (2015) 54-61.
• 3. Morozow D., Narojczyk J., Rucki M., Lavrynenko S.: Wear Resistance of the Cermet Cutting Tools After Aluminum (Al+) and Nitrogen (N+) Ion Implantation. Adv. Mater. Sci., 18 (2018) 92–99.
• 4. Kumar Ch.S., Patel S.K.: Application of surface modification techniques during hard turning: Present work and future prospects. Int. J. Ref. Met. Hard Mater., 76 (2018) 112-127
• 5. Gevorkian E., Lavrynenko S., Rucki M., Siemiątkowski Z., Kislitsa M.: Ceramic cutting tools out of nanostructured refractory compounds. Int. J. Ref. Met. Hard Mater., 68 (2017) 142-144.
• 6. Ji W., Zou B., Zhang Sh., Xing H., Yun H., Wang Y.: Design and fabrication of gradient cermet composite cutting tool, and its cutting performance. J All. Comp., 732 (2018) 25-31.
• 7. Slipchenko K., Petrusha I., Turkevich V., Johansson J., Bushlya V, Ståhl J.E.: Investigation of the mechanical properties and cutting performance of cBN-based cutting tools with Cr3C2 binder phase. Procedia CIRP, 72 (2018) 1433-1438.
• 8. Pittari J.J., Murdoch H.A., Kilczewski S.M., Hornbuckle B.C., Swab J.J., Darling K.A., Wright J.C.: Sintering of tungsten carbide cermets with an iron-based ternary alloy binder: Processing and thermodynamic considerations. Int. J. Ref. Met. Hard Mater., 76 (2018) 1-11.
• 9. Cheng M., Liu H., Zhao B., Huang Ch, Yao P., Wang B.: Mechanical properties of two types of Al2O3/TiC ceramic cutting tool material at room and elevated temperatures. Ceramics International, 43 (2017) 13869-13874.
• 10. Basu B., Lee J.H., Kim D.Y.: Development of WC-ZrO2 nanocomposites by spark plasma sintering. J. Am. Ceram. Soc., 87(2) (2004) 317–319.
• 11. Malek O., Lauwers B., Perez Y., Baets P., Vleugels J.: Processing of ultrafine ZrO2 toughened WC composites. J. Eur. Ceram. Soc., 29(16) (2009) 3371–3378.
• 12. Pedzich Z., Haberko K., Piekarczyk J., Faryna M., Litynska L.: Zirconia matrix-tungsten carbide particulate composites manufactured by hot-pressing technique. Mater Lett., 36 (1998) 70–75.
• 13. Kisly P.S., Prokopiv N.M., Gevorkyan E.S.: Raw Material for Composites. USSR Certificate of Invention № 1759014 V 35/12. 01.05.92.
• 14. Kisly P.S., Prokopiv N.M., Gevorkyan E.S.: Raw Material for Composites. USSR Certificate of Invention № 1780284 V 35/12. 08.07.92.
• 15. Kisly P.S., Prokopiv N.M., Gevorkyan E.S.: Raw Material for Composites. USSR Certificate of Invention № 1676220 V 35/12. 08.05.91.
• 16. Fang Zh.Z., Wang H., Kumar V.: Coarsening, densification, and grain growth during sintering of nano-sized powders—A perspective. Int. J. Ref. Met. Hard Mater., 62 (Part B) (2017) 110-117.
• 17. Tiwari D., Basu B., Biswas K.: Simulation of thermal and electric field evolution during spark plasma sintering, Ceramics International, 35 (2009) 699–708.
• 18. Groza J.R.: Nanosintering. Nanostr. Mater., 12 (1999) 987–992.
• 19. Groza J.R., Stanciu L.A., Kodash V.Y., Crisan M., Zaharescu M.: Electrical field effect in sintering and reaction to form aluminum titanate from binary Al2O3–TiO2 sol–gel powders. J. Am. Ceram. Soc., 2 (2005) 183–192.
• 20. Semchenko G., Gevorkyan E.: Consolidated nanocomposite materials with the defined properties. Advances in Science and Technology, 91 (2014) 24–31.
• 21. Anstis G.R., Chantikul P., Lawn B.R., Marshall D.B.: A critical evaluation of indentation techniques for measuring fracture toughness: I. Direct crack measurements. J. Eur. Ceram. Soc., 64 (1981) 533.
• 22. Blau P.J., Budinski K.G.: Development and use of ASTM standards for wear testing. Wear, 225–229(2) (1999) 1159–1170.

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).

Identyfikatory

DOI

10.1515/adms-2017-0037