Mechanical and Durability Studies about the use of Municipal Solid Waste Landfill in Concrete

• Autorzy: Nair, Arya R , Nirmala, D. B.
• Języki publikacji: EN

Abstrakty

EN

Landfilling is the most common and cheapest method of waste management practice in India. Municipal Solid Waste Landfills (MSWL) became a nuisance affecting the health, hygiene, sanitation and aesthetics of the surrounding area. Aggregates occupy almost 70% of concrete, so replacing waste materials with them could be a rewarding choice. In the current work, an experimental investigation is being carried out to test the addition of MSWL as a substitution with fine aggregate for concrete production. Out of the different aged samples available at the dumpsite, the most aged sample is chosen for experimental investigations according to the basic physical properties. Concrete mixes, with 0%, 4%, 5%, 7% and 10% partial replacement of fine aggregate with MSWL are tested for mechanical properties such as compressive strength, split tensile strength, flexural strength, and non destructive test and have proved to be a partial substitute for fine aggregate. Durability studies such as water absorption, acid attack and sulphate attack also gave better experimental proof for the sustainable reuse of this waste material. The research reveals 5% replacement is the optimum considering all the test result values. The paper leads to advanced research for the suitability of the material in the construction industry.

Słowa kluczowe

PL

produkcja betonu; beton zrównoważony; składowanie odpadów komunalnych; kruszywo; wytrzymałość; właściwości mechaniczne

EN

concrete production; sustainable concrete; municipal solid waste landfill; aggregate; strength; mechanical properties

• Czasopismo: Civil and Environmental Engineering Reports
• Rocznik: 2024
• Tom: Vol. 34, no. 1
• Strony: 1--19
• Opis fizyczny: Bibliogr. 35 poz., il., tab., wykr.

Twórcy

autor

Nair, Arya R

• Department of Civil Engineering, JSS Science and Technology University, Mysuru, Indie,

autor

Nirmala, D. B.

• Department of Civil Engineering, JSS Science and Technology University, Mysuru, Indie

Bibliografia

• 1. Aghayan, I, Khafajeh, R, and Shamsaei, M 2021. Life cycle assessment, mechanical properties, and durability of roller compacted concrete pavement containing recycled waste materials. International Journal of Pavement Research and Technology, 14(5), 595-606.
• 2. Ramasamy, V 2012. Compressive strength and durability properties of Rice Husk Ash concrete. KSCE J Civ Eng, 16, 93-102.
• 3. Kumar, M, S, Grover, M, U and Kanwar, V, K 2020. Development of Concrete by Utilizing Toothpaste Industry Sludge Containing CACO3 as Partial Replacement of Cement and Fine Aggregate. International Journal of Engineering Research & Technology (IJERT) Vol. 9, Issue 04.
• 4. Behzadian, R and Shahrajabian, H 2019. Experimental Study of the Effect of Nano-silica on the Mechanical Properties of Concrete/PET Composites. KSCE J Civ Eng 23, 3660-3668.
• 5. Hakeem, Y, Abd-Al Ftah, R, O, Tayeh, B, A, and Hafez, R, D, A 2023. Eggshell as a fine aggregate replacer with silica fume and fly ash addition in concrete: A sustainable approach. Case Studies in Construction Materials, 18, e01842.
• 6. Nawagamuwa, U, P and P, D, A, Muthukumarana 2018. Service road construction using cement stabilized MSW at the Karadiyana open dumpsite, Sri Lanka, ENGINEER- The Institution of Engineers, Sri Lanka - Vol. LI, No. 01, pp (25-30).
• 7. Dixon, N, and Jones, D, R, V 2005. Engineering properties of municipal solid waste. Geotextiles and Geomembranes, 23(3), 205-233.
• 8. Yang, Z, Tian, S, Liu, L, Wang, X, and Zhang, Z 2018. Recycling ground MSWI bottom ash in cement composites: Long-term environmental impacts. Waste Management, 78, 841-848.
• 9. Saluja, S, Gaur, A, and Ahmad, K 2021. Physico-chemical characterization of stabilized MSW of an Okhla landfill. Materials Today: Proceedings, 44, 4287-4292.
• 10. Kong, Q, Yao, J, Yang, Q, Shen, D, and Long, Y 2018. Weathering treatment coupled with nano-silica filling to promote the engineering property of municipal solid waste incinerator bottom ash. RSC advances, 8(67), 38701-38705.
• 11. Pavlík, Z, Jerman, M, Keppert, M, Pavlíková, M, Reiterman, P, & Černý, R 2010. Use of municipal solid waste incineration waste materials as admixtures in concrete. 2nd International conference on sustainable construction materials and technologies, Ancona, pp. 28-30.
• 12. Haque, M, A, Hoque, M. A, Saha, S and Hadiuzzaman, M 2014. Immobilization of heavy metals from paving block constructed with cement and sand-solid waste matrix. Asian J Appl. Sci, 7, 150-7.
• 13. Hoque, M, A and M, Aminul Haque 2015. Optimising the mixing proportion of solidified landfill waste for sustainable reuse in paving block construction. International Journal of Environment and Waste Management 16.3, 234-247.
• 14. IS: 4031 1988. Method of physical test for hydraulic cement, Bureau of Indian Standards, New Delhi.
• 15. IS: 12269 1987. Specification for 53 grade ordinary portland cement, Bureau of Indian Standards, New Delhi.
• 16. IS: 2386 (Part 3) 1963. Methods of testing for aggregates for concrete, Specific Gravity, Density, Absorption and Organic Impurities, Bureau of Indian Standards, New Delhi.
• 17. IS: 383 1987. Specification for coarse and fine aggregate from natural sources for concrete, 8th Reprint October 1991, Bureau of Indian Standards, New Delhi.
• 18. IS 456 2000. Code of practice for plain and reinforced concrete, 4th Revision, Bureau of Indian Standards, New Delhi.
• 19. IS: 10262 1982. Handbook of concrete mix design, Bureau of Indian Standards, New Delhi.
• 20. IS 1199 (Part 2): 2018 Fresh Concrete: Methods of Sampling, Testing and Analysis (Part 2) Determination of Consistency of Fresh Concrete (First Revision). Bureau of Indian Standards, New Delhi.
• 21. IS: 516 1959. Methods of test for strength of concrete, Amendment No. 2, Reprint 1993, Bureau of Indian Standards, New Delhi.
• 22. IS 13311 part 2 1992. Non-destructive testing of concrete- methods of test Part 2- Rebound Hammer Test, Reaffirmed (2004), Bureau of Indian Standards, New Delhi.
• 23. Saxena, R, Gupta, T, Sharma, R, K, Chaudhary, S, & Jain, A 2020. Assessment of mechanical and durability properties of concrete containing PET waste. Scientia Iranica, 27(1), 1-9.
• 24. Li, X, G, Lv, Y, Ma, B, G, Chen, Q, B, Yin, X, B, and Jian, S, W 2012. Utilization of municipal solid waste incineration bottom ash in blended cement. Journal of Cleaner Production, 32, 96-100.
• 25. Tavakoli, D, Dehkordi, R. S, Divandari, H, and de Brito, J 2020. Properties of roller-compacted concrete pavement containing waste aggregates and nano SiO2. Construction and Building Materials, 249, 118747.
• 26. Sharaky, I, Issa, U, Alwetaishi, M, Abdelhafiz, A, Shamseldin, A, Al-Surf, M, and Balabel, A 2021. Strength and water absorption of sustainable concrete produced with recycled basaltic concrete aggregates and powder. Sustainability, 13(11), 6277.
• 27. Poongodi, K, Murthi, P, Gobinath, R, Srinivas, A, and Sangeetha, G 2019. Mechanical properties of pavement quality concrete using recycled aggregate. Int J Innov Technol Explor Eng, 9, 33-38.
• 28. Shamsaei, M, Khafajeh, R, and Aghayan, I 2019. Laboratory evaluation of the mechanical properties of roller compacted concrete pavement containing ceramic and coal waste powders. Clean Technologies and Environmental Policy, 21, 707-716.
• 29. Shettima, A. U, Hussin, M, W, Ahmad, Y, and Mirza, J 2016. Evaluation of iron ore tailings as replacement for fine aggregate in concrete. Construction and Building Materials, 120, 72-79.
• 30. Heniegal, A, M, El-Habiby, F, and Abdel, R, D 2014. Performance of concrete incorporating industrial and agricultural wastes. IOSR Journal of Engineering (IOSRJEN), 4(12), 01-011.
• 31. Saha, A, S, and Amanat, K, M 2021. Rebound hammer test to predict in-situ strength of concrete using recycled concrete aggregates, brick chips and stone chips. Construction and Building Materials, 268, 121088.
• 32. Shariati, Mahdi, Ramli-Sulong, Nor Hafizah, Arabnejad, Mohammad Mehdi, Shafigh, Payam, and Sinaei, Hamid 2011, Assessing the strength of reinforced concrete structures through Ultrasonic Pulse Velocity and Schmidt Rebound Hammer tests. Scientific Research and Essays, 6(1), pp. 213-220.
• 33. Gurumoorthy, N, and Arunachalam, K 2019, Durability studies on concrete containing treated used foundry sand. Construction and building materials, 201, 651-661.
• 34. D, Maruthachalam, M, Gurunathan, I, Padmanaban, and B, G, Vishnuram 2011. Durability Properties of Fibrillated Polypropylene fibre reinforced high-performance concrete, J. Struc. Engg. 38(1), 1-9.
• 35. K, Rajesh Kumar and N, Mahendran, 2015. Durability performance of hybrid fibre reinforced self-compacting concrete containing Class F fly ash, Aust. J. Basic Appl. Sci. 9 (27), 61-68.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2024).

Identyfikatory

DOI

10.59440/ceer/184030