Spin welding of 3D‑printed and solid acrylonitrile-butadiene-styrene (ABS) components: a preliminary investigation

• Autorzy: Bagheri, Abbasali , Asghari, Vahid , Kami, Abdolvahed
• Języki publikacji: EN

Abstrakty

EN

In this study, spin welding was used to join 3D-printed (3dp) and solid acrylonitrile-butadiene-styrene (ABS) rods. The fused filament fabrication method was utilized to make the 3dp ABS rods. These rods had a diameter of 12.5 mm and internal fill percentages of 50, 75, and 100. At three different spindle speeds, 710, 1000, and 1400 rpm, two distinct joints were created: 3dp/3dp and 3dp/solid joints. These weld joints' tensile characteristics were investigated. The fracture section of the joints was analyzed employing field-emission scanning electron microscopy, and the causes for the fracture of the joints were explored. Furthermore, the effects of the fill percentage and spindle speed on the joint’s tensile strength were studied using analysis of variance (ANOVA). Moreover, functional predictive equations for estimating weld strength were established. According to the results, the joints typically failed due to brittle fracture in the 3dp component of the weld joints. Furthermore, it was found that increasing the fill percentage and spindle speed enhanced the tensile strength of the weld joints. Moreover, 3dp/solid joints were stronger than 3dp/3dp joints.

Słowa kluczowe

PL

produkcja dodatkowa; drukowanie 3D; ABS; spawanie wirowe; spajanie w stanie stałym

EN

additive manufacturing; 3D printing; ABS; spin welding; solid state joining

• Czasopismo: Archives of Civil and Mechanical Engineering
• Rocznik: 2022
• Tom: Vol. 22, no. 3
• Strony: art. no. e130
• Opis fizyczny: Bibliogr. 35 poz., rys., tab., wykr.

Twórcy

autor

Bagheri, Abbasali

• Faculty of Mechanical Engineering, Semnan University, Semnan, Iran

autor

Asghari, Vahid

• Iran Technical and Vocational Training Organization, Sari, Mazandaran, Iran

autor

Kami, Abdolvahed

• Faculty of Mechanical Engineering, Semnan University, Semnan, Iran,

Bibliografia

• 1. Fico D, Rizzo D, Casciaro R, Esposito CC. A review of polymer-based materials for fused filament fabrication (FFF): focus on sustainability and recycled materials. Polymers. 2022;14:465.
• 2. Singh S, Singh G, Prakash C, Ramakrishna S. Current status and future directions of fused filament fabrication. J Manuf Process. 2020;55:288-306. https://doi.org/10.1016/j.jmapro.2020.04.049.
• 3. Brenken B, Barocio E, Favaloro A, Kunc V, Pipes RB. Fused filament fabrication of fiber-reinforced polymers: a review. Addit Manuf. 2018;21:1-16. https://doi.org/10.1016/j.addma.2018.01.002.
• 4. Ramazani H, Kami A. Metal FDM, a new extrusion-based additive manufacturing technology for manufacturing of metallic parts: a review. Prog Addit Manuf. 2022. https://doi.org/10.1007/s40964-021-00250-x.
• 5. Notzel D, Eickhoff R, Hanemann T. Fused filament fabrication of small ceramic components. Materials. 2018;11:1463.
• 6. Tiwary VK, Arunkumar P, Malik VR. An overview on joining/welding as post-processing technique to circumvent the build volume limitation of an FDM-3D printer. Rapid Prototyp J. 2021;27(4):808-821. https://doi.org/10.1108/RPJ-10-2020-0265.
• 7. Kumar R, Singh R, Ahuja I. Mechanical, thermal and micrographic investigations of friction stir welded: 3D printed melt flow compatible dissimilar thermoplastics. J Manuf Process. 2019;38:387-95.
• 8. Tiwary VK, Ravi N, Arunkumar P, Shivakumar S, Deshpande AS, Malik VR. Investigations on friction stir joining of 3D printed parts to overcome bed size limitation and enhance joint quality for unmanned aircraft systems. P I Mech Eng C J Mech. 2020;234:4857-71.
• 9. Kumar R, Singh R, Ahuja IPS, Amendola A, Penna R. Friction welding for the manufacturing of PA6 and ABS structures reinforced with Fe particles. Compos B Eng. 2018;132:244-57. https://doi.org/10.1016/j.compositesb.2017.08.018.
• 10. Singh R, Kumar R, Feo L, Fraternali F. Friction welding of dissimilar plastic/polymer materials with metal powder reinforcement for engineering applications. Compos B Eng. 2016;101:77-86. https://doi.org/10.1016/j.compositesb.2016.06. 082.
• 11. Sweeney CB, et al. Welding of 3D-printed carbon nanotube-polymer composites by locally induced microwave heating. Sci Adv. 2017;3: e1700262.
• 12. Langnau L. Ultrasonic welding 3D printed parts. 2016. https://www. makepartsfast.com/how-to-ultrasonically-weld-3d-printedparts/. Accessed 12 Oct 2016.
• 13. Kumar R, Singh R, Ahuja IPS, Penna R, Feo L. Weldability of thermoplastic materials for friction stir welding-a state of art review and future applications. Compos B Eng. 2018;137:1-15. https://doi.org/10.1016/j.compositesb.2017.10.039.
• 14. Goncalves LFFF, Duarte FM, Martins CI, Paiva MC. Laser welding of thermoplastics: an overview on lasers, materials, processes and quality. Infrared Phys Technol. 2021;119: 103931. https://doi.org/10.1016/j.infrared.2021.103931.
• 15. Lambiase F, Derazkola HA, Simchi A. Friction stir welding and friction spot stir welding processes of polymers-state of the art. Materials. 2020;13:2291.
• 16. Troughton MJ. Handbook of plastics joining: a practical guide. Norwich: William Andrew; 2008.
• 17. Asghari V, Kami A, Bagheri A. An investigation on the effect of nanoparticle reinforcement and weld surface shape on bending behavior of rotary friction-welded HDPE. Proc Inst Mech Eng Part L J Mater Des Appli. 2021;236:222-34.
• 18. Lin C, Wu LC. Friction welding of similar and dissimilar materials: PMMA and PVC. Polym Eng Sci. 2000;40:1931-41.
• 19. Lin C, Wu L-C, Chou Y-C. Effect of solvent and cosolvent on friction welding properties between part of PMMA with PVC. J Mater Sci. 2003;38:2563-70.
• 20. Aydin M. Friction weldability of a PA 6 polymer. Mater Test. 2015;57:214-9.
• 21. Bindal T, Saxena RK, Pandey S. Analysis of joint overlap during friction spin welding of plastics. Mater Today Proc. 2020;26:2798-804. https://doi.org/10.1016/j.matpr.2020.02.581.
• 22. Lin C-B, Wu LC, Chen YY. Friction welding of similar materials: polypropylene, high-density polyethylene, and nylon-6. J Appl Polym Sci. 2004;91:2771-80. https://doi.org/10.1002/app.13459.
• 23. Hasegawa M, Asada T, Ozawa Y, Taki N. Study of friction welding of polyethylene pipes. Weld Int. 1998;12:682-7. https://doi.org/10.1080/09507119809452035.
• 24. Dhinesh SK, Arun PS, Senthil KKL, Megalingam A. Study on flexural and tensile behavior of PLA, ABS and PLA-ABS materials. Mater Today Proc. 2021;45:1175-80. https://doi.org/10.1016/j.matpr.2020.03.546.
• 25. Paganin LC, Barbosa GF. A comparative experimental study of additive manufacturing feasibility faced to injection molding process for polymeric parts. Int J Adv Manuf Technol. 2020;109:2663-77. https://doi.org/10.1007/s00170-020-05849-y.
• 26. Gawali SK, Kumar N, Jain PK. Investigations on the development of heated build platform for additive manufacturing of large-size parts. In: Sharma V, Dixit U, Sorby K, Bhardwaj A, Trehan R (eds) Manufacturing engineering. Lecture Notes on Multidisciplinary Industrial Engineering. Singapore: Springer; 2020. https://doi.org/10.1007/978-981-15-4619-8_1.
• 27. Elsheikh AH, Abd Elaziz M, Vendan A. Modeling ultrasonic welding of polymers using an optimized artificial intelligence model using a gradient-based optimizer. Weld World. 2022;66:27-44. https://doi.org/10.1007/s40194-021-01197-x.
• 28. ASTM D638-14. Standard Test Method for Tensile Properties of Plastics; 2014.
• 29. Zou X, et al. Surface structuring via additive manufacturing to improve the performance of metal and polymer joints. Metals. 2021;11:567.
• 30. Ning F, Cong W, Qiu J, Wei J, Wang S. Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling. Compos B Eng. 2015;80:369-78. https://doi.org/10.1016/j.compositesb.2015.06.013.
• 31. Azadi M, Dadashi A, Dezianian S, Kianifar M, Torkaman S, Chiyani M. High-cycle bending fatigue properties of additive-manufactured ABS and PLA polymers fabricated by fused deposition modeling 3D-printing. Forces Mech. 2021;3: 100016. https://doi.org/10.1016/j.finmec.2021.100016.
• 32. Lienert T, Siewert T, Babu S, Acoff V. Specifications SWP, ASM handbook, volume 6A: welding fundamentals and processes. ASM International Materials Park, OH, 2011.
• 33. Design-Expert. Design-Expert® software, 55413rd ed. Minneapolis: Stat-Ease Inc., 2019.
• 34. Ueda M, et al. 3D compaction printing of a continuous carbon fiber reinforced thermoplastic. Compos A Appl Sci Manuf. 2020;137: 105985. https://doi.org/10.1016/j.compositesa.2020.105985.
• 35. Kumar KS, Soundararajan R, Shanthosh G, Saravanakumar P, Ratteesh M. Augmenting effect of infill density and annealing on mechanical properties of PETG and CFPETG composites fabricated by FDM. Mater Today Proc. 2021;45:2186-91.

Uwagi

PL

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023)

Identyfikatory

DOI

10.1007/s43452-022-00449-x