Adequate Force Characteristics of a Friction System

• Autorzy: Pluta, Z. , Hryniewicz, T.
• Języki publikacji: EN

Abstrakty

EN

In the paper, at first some remarks concerning friction are presented by the definition of the friction itself, as well as its essential force characteristics. An adequate definition of friction is introduced, and moreover a correct its characteristics. Next the statics, dynamics, and kinematics of the friction system is given, forming the force characteristics of this system for each of the mechanical behaviours, taking into account real inertia forces of the body under friction. Three types of coefficients of sliding friction have been separated, namely: coefficient of static friction, dynamic friction, and kinematic friction. Then the comparative analysis of existent and new knowledge on the force characteristics of friction process has been presented. The consideration on how to determine the coefficient of static friction has also been carried out. Reflections on the possibilities to form further force characteristics of the friction process are presented to develop this work with some final remarks directing the attention on the conditions of development of science on friction.

Słowa kluczowe

EN

Friction; Friction system; Force of surface resistance; friction coefficient; Static friction; Dynamic friction; Kinematic friction; triangle of friction; Passive zone of for ces; Active zone of for ces; Characteristics of friction process

• Czasopismo: International Letters of Chemistry, Physics and Astronomy
• Rocznik: 2013
• Tom: Vol. 8, iss. 1
• Strony: 20--26
• Opis fizyczny: Bibliogr. 38 poz., rys..

Twórcy

autor

Pluta, Z.

• Koszalin University of Technology, Raclawicka 15-17, PL 75-620 Koszalin, Poland

autor

Hryniewicz, T.

• Koszalin University of Technology, Raclawicka 15-17, PL 75-620 Koszalin, Poland,

Bibliografia

• [1] W. Siuta, Technical mechanics (in Polish), PWSZ, Warszawa 1964.
• [2] M. Szymczak (ed.), Dictionary of Polish language (in Polish), PWN, Warszawa 1987.
• [3] J. Misiak, General mechanics. Statics and kinematics (in Polish), Vol. 1, WNT, Warszawa 1995.
• [4] Collective work: Small guidebook of mechanics (in Polish), WNT, Warszawa 1988.
• [5] F. P. Bowden, W. Tabor, Friction and Lubrication of Solids, Oxford 1954.
• [6] I. W. Kragielski, M. N. Dobycin, W. S. Kombalow, Grundlagen der Berechnung von Reibung und Verschleiβ. Verlag – Technik, Berlin 1982.
• [7] H. Drescher, Zur Mechanik Der Reibung zwischen Festen Körpern, VDJ 1959.
• [8] B. W. Dieriagin, What is the friction? (in Polish), PWN, Warszawa 1956.
• [9] E. Rabinowicz, Investigation of Size Effects in Slipping by Means of Statistical Techniques, Proc. of the Conf. Lubric. & Wear, London 1957.
• [10] J. Sadowski, Trybologia 6 (1987) 4-6.
• [11] J. Sadowski, Trybologia 1 (1988) 10-11.
• [12] J. Sadowski, Trybologia 2 (1988) 7-10.
• [13] G. Fleischer, Schmierungstechnik, 8 and 9, 1976.
• [14] A. Tross, Über das Wesen und den Mechanismus er Festigkeit, Eigenverlag, Münhen und Zell Am See 1966.
• [15] F. T. Barwell, Bearing (in Polish), WNT, Warszawa 1984.
• [16] F. P. Bowden, W. Tabor, Introduction to tribology (in Polish), WNT, Warszawa 1980.
• [17] M. Gierzyńska, E. Olszewski, M. Przeniosło, Zeszyty Naukowe Politechniki Częstochowskiej. Nauki Techniczne (Mechanika), Częstochowa 23(9) (1973) 77-91.
• [18] W. Leszek, W. Zwierzycki, Trybologia 2 (1987) 4-7.
• [19] N. P. Suh, H. C. Sin, Wear 69 (1981) 92-114.
• [20] Zdzisław Pluta, Some aspects of mutual lapping of alundum ceramics (in Polish), Proc. 4th Confer. On „Abrasive Treatment and Machine Tools”, Łódź, May 1981, pp. 190-193.
• [21] Zdzisław Pluta, Energetic aspects of cutting using single abrasive grain fixed flexibly (in Polish), Proc. 23rd Sci. School on Abrasive Treatment. Rzeszów-Myczkowice, September, 2000, pp. 303-309.
• [22] Zdzisław Pluta, Potential and the work of single abrasive grain (in Polish), Proc. 25th Sci. School on Abrasive Treatment. Wrocław-Duszniki Zdrój, 11-14 September 2002, pp. 389-394.
• [23] Zdzisław Pluta, Determination of energetic potential of compact abrasive tools (in Polish), Proc. 25th Sci. School on Abrasive Treatment. Wrocław-Duszniki Zdrój, 11-14 September 2002, pp. 395-400.
• [24] Zdzisław Pluta, Fundamentals of surface smoothing by elastic abrasive wheels (in Polish), Edit. Office of Politechnika Koszalińska, Koszalin 2007.
• [25] Zdzisław Pluta, Energetyka 7 (2005) 496-501.
• [26] Zdzisław Pluta, Tadeusz Hryniewicz, International Letters of Chemistry, Physics and Astronomy 7(2) (2013) 85-101.
• [27] Zdzisław Pluta, LAB (Laboratoria, Aparatura, Badania) 2 (2004) 50-52.
• [28] W. Leszek, Zagadnienia Eksploatacji Maszyn 36(2)126 (2001) 33-47.
• [29] W. Tarnowski, Computer simulation of continuous processes (in Polish), Wydawnictwo Politechniki Koszalińskiej, Koszalin 1995.
• [30] Zdzisław Pluta, Tadeusz Hryniewicz, Intern. J. Adv. Mater. Technol. 62(5) (2012) 529-542, DOI: 10.1007/s00170-011-3813-5.
• [31] Zdzisław Pluta, Tadeusz Hryniewicz, International Letters of Chemistry, Physics and Astronomy 3 (2012) 1-10.
• [32] Zdzisław Pluta, Tadeusz Hryniewicz, International Letters of Chemistry, Physics and Astronomy 3 (2012) 11-23.
• [33] Zdzisław Pluta, Tadeusz Hryniewicz, International Letters of Chemistry, Physics and Astronomy 4 (2012) 1-7.
• [34] Zdzisław Pluta, Tadeusz Hryniewicz, International Letters of Chemistry, Physics and Astronomy 4 (2012) 8-16.
• [35] Zdzisław Pluta, Tadeusz Hryniewicz, International Letters of Chemistry, Physics and Astronomy 5 (2012) 35-45.
• [36] Zdzisław Pluta, Tadeusz Hryniewicz, International Letters of Chemistry, Physics and Astronomy 4(2013) 56-72.
• [37] Z. Osiński, Przegląd Mechaniczny 16 (1996) 11-14.
• [38] Z. Dąbrowski, Przegląd Mechaniczny 11 (2007) 15-18.