Archives of Civil and Mechanical Engineering - Tom Vol. 21, no. 3 (2021) - Biblioteka Nauki - Yadda

Nowa wersja platformy, zawierająca wyłącznie zasoby pełnotekstowe, jest już dostępna.
Przejdź na https://bibliotekanauki.pl

Tom - szczegóły

Tytuł artykułu

Vol. 21, no. 3

Czasopismo

Archives of Civil and Mechanical Engineering

Wydawca

Rocznik

2021

Identyfikatory

Zawartość wolumenu

Vol. 21, no. 3
- artykuł: Silicon carbide nanocomposites reinforced with disordered graphitic carbon formed in situ through oxidation of Ti3C2 MXene during sintering (Petrus M., Woźniak J., Cygan T., Lachowski A., Rozmysłowska-Wojciechowska A., Wojciechowski T., Ziemkowska W., Chlubny L., Jastrzębska A., Adamczyk-Cieślak B., Olszyna A.), s. 1--12
- artykuł: Experimental and numerical investigation on plasticity and fracture behaviors of aluminum alloy 6061-T6 extrusions (Zhu P., Zhang Q., Xu H., Ouyang Y.), s. 13--30
- artykuł: Solid-state welding of ultrafine grained copper rods (Morawiński Ł., Jasiński C., Ciemiorek M., Chmielewski T., Olejnik L., Lewandowska M.), s. 31--43
- artykuł: Real-time hybrid test of a LNG storage tank with a variable curvature friction pendulum system (Lin S.-c., Wang J., Gao S., Zhao H.-t.), s. 44--62
- artykuł: Three-dimensional exact elastic analysis of nanoplates (Wang G., Zhang Y., Arefi M.), s. 63--76
- artykuł: Effects of equal channel angular pressing and heat treatments on the microstructures and mechanical properties of selective laser melted and cast AlSi10Mg alloys (Snopiński P., Król M., Pagáč M., Petrů J., Hajnyš J., Mikuszewski T., Tański T.), s. 77--94
- artykuł: Dynamic non-linear Mohr-Coulomb strength criterion for hybrid basalt-polypropylene fibre-reinforced concrete under impact loading (Fu Q., Xu W., Huang D., He J., Zhang L., Kou H., Niu D.), s. 95--113
- artykuł: Detailed micro-modeling of partially grouted reinforced masonry shear walls: extended validation and parametric study (Calderón S., Sandoval C., Milani G., Arnau O.), s. 114--137
- artykuł: Fracture limit analysis of DP590 steel using single point incremental forming: experimental approach, theoretical modeling and microstructural evolution (Pandre S., Morchhale A., Mahalle G., Kotkunde N., Suresh K., Singh S. K.), s. 138--157
- artykuł: Dynamic damage analysis of a ten-layer circular composite plate subjected to low-velocity impact (Raissi H.), s. 158--199
- artykuł: Structural performance of reinforced concrete interior beam-column joints with high-strength bars (Kim S.-W., Chang H.-J.), s. 200--213
- artykuł: Isogeometric nonlinear bending analysis of porous FG composite microplates with a central cutout modeled by the couple stress continuum quasi-3D plate theory (Rao R., Sahmani S., Safaei B.), s. 214--230
- artykuł: Dynamic crushing behavior of closed-cell aluminum foams based on different space-filling unit cells (Talebi S., Hedayati R., Sadighi M.), s. 231--245
- artykuł: Effects of manufacturing methods and production routes on residual stresses of rectangular and square hollow steel sections: a review (Abathun M. Z., Han J., Yu W.), s. 246--264
- artykuł: The effect of freeze-thaw cycles on flexural behaviour of FRP-reinforced ECC beams (Wang Y., Wang G., Guan Z., Ashour A., Ge W., Zhang P., Lu W., Cao D.), s. 265--288
- artykuł: Effect of multi-walled carbon nanotubes on the damping property of cement mortar and mechanism analysis (Li Y., Li H., Jin C.), s. 289--302
- artykuł: Crashworthiness-based multi-objective integrated optimization of electric vehicle chassis frame (Wang S., Wang D.), s. 303--320
- artykuł: Numerical and experimental study on the inner diameter uniformity of hollow shafts in cross-wedge rolling with mandrel (Zhou J., Shen J., Wang B., Huang X., Guo W.), s. 321--336
- artykuł: Experimental study of nanocomposite hybrid adhesive-rivet joints (Nabibi N., Ramezani S.), s. 337--365
- artykuł: A physically based constitutive model of Ti-6Al-4 V and application in the SPF/DB process for a pyramid lattice sandwich panel (Wu Y., Wu D., Ma J., Xiao W., Zheng K., Chen M.), s. 366--382
- artykuł: Effect of rubber particles on impact resistance of concrete at a temperature of - 20 ℃ (Yu Y., Jin Z., Zhu H., Song H.), s. 383--396
- artykuł: Prediction of forming limits and microstructural evolution during warm stretch forming of DP590 steel (Pandre S., Morchhale A., Kotkunde N., Singh S. K., Ravindran S.), s. 397--419
- artykuł: Tunnel deformation and stress response under the bilateral foundation pit construction: a case study (Fan S., Song Z., Xu T., Wang K., Zhang Y.), s. 420--438
- artykuł: Performance study of precast reinforced concrete shear walls with steel columns containing friction-bearing devices (Fang Q., Qiu H., Sun J., Dal Lago B., Jiang H.), s. 439--457
- artykuł: Analysis of thickness variation and stress state in hydroforming of complex T-shaped tubular part of nickel-based superalloy (Cui X.-L., Yuan S.), s. 458--471
- artykuł: Analysis of vane loads and motion in a hydraulic double vane pump with integrated electrical drive (Fiebig W., Cependa P., Kuczwara H., Wang F.), s. 472--486
- artykuł: Microstructural and mechanical properties of CFC composite/Ti6Al4V joints brazed with Ag–Cu–Ti and refractory metal foils (Kang Y., Feng K., Zhang W., Mao Y.), s. 487--496
- artykuł: Isogeometric couple stress continuum-based linear and nonlinear flexural responses of functionally graded composite microplates with variable thickness (Yang Z., Lu H., Sahmani S., Safaei B.), s. 497--515
- artykuł: Investigation of modified friction stir clinching-brazing process of AA2024 Al/AZ31 Mg: metallurgical and mechanical properties (Paidar M., Kazemi A., Mehrez S., Ojo O. O., Nasution M. K. M., Mironov S. N.), s. 516--532
- artykuł: Numerical simulation for train-track-bridge dynamic interaction considering damage constitutive relation of concrete tracks (Xu L., Yu Z., Shan Z.), s. 533--555
- artykuł: Statistical damage constitutive model based on the Hoek-Brown criterion (Chen Y., Lin H., Wang Y., Xie S., Zhao Y., Yong W.), s. 556--564
- artykuł: Providing a new perspective for obtaining high-quality metal coatings: fabrication and properties studies of TA2 foil on Q235 steel by explosive welding (Xu J., Yang M., Chen D., Ma H., Shen Z., Zhang B., Tian J.), s. 565--575
- artykuł: Quantitative Rietveld analysis of the decomposition of hardened rapid sulphoaluminate cement after exposure to elevated temperatures (Tchekwagep J. J. K., Chen D., Mukhopadhyay A. K., Wang S., Huang S., Cheng X.), s. 576--594
- artykuł: Processing of commercially pure copper tubes by hydrostatic tube cyclic extrusion–compression (HTCEC) as a new SPD method (Eftekhari M., Faraji G., Bahrami M.), s. 595--606
- artykuł: Influence of curing conditions on the mechanical performance of ultra-high-performance strain-hardening cementitious composites (Kim M.-J., Oh T., Yoo D.-Y.), s. 607--617
- artykuł: Surface properties enhancement of Inconel 718 alloy by ultrasonic roller burnishing coupled with heat treatment (Shen X., Gong X., Wang B., He J., Xu C., Su G.), s. 618--634
- artykuł: Structural assessment of bridges through ambient noise deconvolution interferometry: application to the lateral dynamic behaviour of a RC multi-span viaduct (García-Macías E., Ubertini F.), s. 635--654
- artykuł: Generalized thermoelasticity model of nonlocal strain gradient Timoshenko nanobeams (Yue X., Yue X., Borjalilou V.), s. 655--674
- artykuł: Seismic behavior and damage assessment of mid-rise cold-formed steel-framed buildings with normal and reinforced beam-column joints (Jiang L., Zhang X., Ye J., Jiang L., Zhou L.), s. 675--690
- artykuł: Synergistic effects of alloying, homogenization, and hot extrusion on the mechanical properties of as-cast Mg–Al–Ca magnesium alloys (Nasiri Z., Mirzadeh H., Khorrami M. S., Emamy M.), s. 691--698
- artykuł: Deformation and failure mechanism of deep cement mixing walls: experimental study using physical model tests (Waichita S., Jongpradist P., Patawanit P., Jamsawang P., Arangelovski G., Likitlersuang S.), s. 699--715
- artykuł: Assessment of modal characteristics of cross-laminated timber beams subject to successive damages (Genç A. F., Kahya V., Altunışık A. C., Günaydın M., Demirkır C.), s. 716--736
- artykuł: Microstructure and mechanical properties of TC4 titanium alloy hollow shaft formed by cross wedge rolling (Feng P., Yang C., Wang B., Li J., Liu R.), s. 737--751
- artykuł: Rehabilitation of RC flexural members in shear with externally bonded fiber-reinforced polymer composites: present status and future need (Kar S., Biswal K. C.), s. 752--775
- artykuł: A multiscale experimental analysis of mechanical properties and deformation behavior of sintered copper-silicon carbide composites enhanced by high-pressure torsion (Nosewicz S., Bazarnik P., Clozel M., Kurpaska Ł., Jenczyk P., Jarząbek D., Chmielewski M., Romelczyk-Baishya B., Lewandowska M., Pakieła Z., Huang Y., Langdon T. G.), s. 776--794
- artykuł: Multi-objective optimization of process parameters in cold forging minimizing risk of crack and forging energy (Kitayama S., Kadoya S., Takano M., Kobayashi A.), s. 795--806
- artykuł: Mechanical and thermal stability of retained austenite in plastically deformed bainite-based TRIP-aided medium-Mn steels (Kozłowska A., Grajcar A., Janik A., Radwański K., Krupp U., Matus K., Morawiec M.), s. 807--820
- artykuł: Fracture behavior of 7075-T6 aluminum alloy under electromagnetic forming and traditional stamping (Yan Z., Xiao A., Cui X., Lin Y., Yu H., Chen B.), s. 821--835
- artykuł: Seismic performance of circular reinforced concrete columns subjected to compression, bending and torsion with low and moderate shear span ratio (Jiao C., Liu Y., Wei B., Li J., Hu Z., Zhu G.), s. 836--851
- artykuł: The decisive impact of microstructure on the machinability of pure copper (Sun X., Ebrahimi M., Attarilar S.), s. 852--860

rozwiń roczniki

JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.