Investigation on rock cutting characteristics of spherical-tooth hob

• Autorzy: Zhang, Xuhui , Long, Zhaomin , Liao, Yashi , Long, Jinjing , Liu, Jifu
• Języki publikacji: EN

Abstrakty

EN

To study the rock cutting characteristics of spherical-tooth hob, the rock cutting process induced by the spherical-tooth hob is analyzed based on the finite element simulation and the rock cutting experiments. Then the rock breaking states, rock cutting forces and rock cutting efficiency caused by the spherical-tooth hob under different penetrations are obtained. The results show that a cutting groove and a series of pits in the cutting groove will be produced when the penetration exceeds 9 mm. At such penetration, the spherical teeth and the cutter ring can cooperate to cut rock. The cutting forces curves show obvious fluctuation and the peak values of cutting forces correspond to the moment when a spherical tooth intrudes into the rock sample totally. The cutting forces increase with the growth of the penetration and the increase speed turns fast when the penetration exceeds 9 mm. With the increase of penetration, the specific energy consumption of the spherical tooth hob first decreases and then increases. It exists an optimal penetration of 12 mm to achieve the highest rock cutting efficiency.

Słowa kluczowe

EN

spherical-tooth hob; penetration; rock cutting force; specific energy consumption

• Czasopismo: Mining Science
• Rocznik: 2022
• Tom: Vol. 29
• Strony: 121--144
• Opis fizyczny: Bibliogr. 36 poz., rys.

Twórcy

autor

Zhang, Xuhui

• College of Engineering and Design, Hunan Normal University, Changsha, 410081, China

autor

Long, Zhaomin

• College of Engineering and Design, Hunan Normal University, Changsha, 410081, China
• College of Mechanical and Electrical Engineering, Central South University, Changsha Hunan 410083, China

autor

Liao, Yashi

• College of Engineering and Design, Hunan Normal University, Changsha, 410081, China,

autor

Long, Jinjing

• College of Engineering and Design, Hunan Normal University, Changsha, 410081, China

autor

Liu, Jifu

• College of Engineering and Design, Hunan Normal University, Changsha, 410081, China

Bibliografia

• Cardu M, Rispoli A, Iabichino G, Oreste P, Vagnon F (2021). Theoretical and Experimental Results from Laboratory Tests by ILCM. Geotechnical and Geological Engineering, 39: 3573-3597
• Cho J, Jeon S, Jeong H, Chang S (2013). Evaluation of cutting efficiency during TBM disc cutter excavation within a Korean granitic rock using linear-cutting-machine testing and photogrammetric measurement. Tunnelling and Underground Space Technology, 35: 37-54
• Cho J, Jeon S, Yu S, Chang S (2010). Optimum spacing of TBM disc cutters: A numerical simulation using the three-dimensional dynamic fracturing method. Tunnelling and Underground Space Technology, 25(3): 230-244
• Deng Y, Yin F, Deng H, Li J, Liu W (2020). Research on crack propagation and rock fragmentation efficiency under spherical tooth dynamic indentation. Arabian Journal of Geosciences, 13(1): 1-9
• Entacher M, Schuller E, Galler R (2015). Rock Failure and Crack Propagation Beneath Disc Cutters. Rock Mechanics and Rock Engineering, 48: 1559-1572
• Geng Q, Wei Z, Meng H (2016a). An experimental research on the rock cutting process of the gage cutters for rock tunnel boring machine (TBM). Tunnelling and Underground Space Technology, 52: 182-191
• Geng Q , Wei Z, Meng H, Chen Q (2016b). Numerical and experimental research on the rock-breaking process of tunnel boring machine normal disc cutters. Journal of Mechanical Science and Technology, 30: 1733-1745
• Geng Q, Wei Z, Ren J (2017). New rock material definition strategy for FEM simulation of the rock cutting process by TBM disc cutters. Tunnelling and Underground Space Technology, 65: 179-186
• Gertsch R, Gertsch L, Rostami J (2007). Disc cutting tests in Colorado Red Granite: Implications for TBM performance prediction. International Journal of Rock Mechanics and Mining Sciences, 44(2): 238-246
• Haeri H, Marji M F (2016). Simulating the crack propagation and cracks coalescence underneath TBM disc cutters. Arabian Journal of Geosciences, 9(2):1-10
• Hu X, Du C, Liu S, Tan H, Liu Z (2019). Three-Dimensional Numerical Simulation of Rock Breaking by the Tipped Hob Cutter Based on Explicit Finite Element. IEEE Access, 7: 86054-86063
• Jiang B, Zhao G, Gong Q, Zhao X (2021). Three-dimensional coupled numerical modelling of lab-level full-scale TBM disc cutting tests. Tunnelling and Underground Space Technology, 114: 103997
• Lin L, Xia Y, Wu D (2020). A hybrid fuzzy multiple criteria decision-making approach for comprehensive performance evaluation of tunnel boring machine disc cutter. Computers & Industrial Engineering, 149: 106793
• Lin Q, Cao P, Cao R, Fan X (2019). Acoustic emission characteristics during rock fragmentation processes induced by disc cutter under different water content conditions. Applied Sciences, 9(1): 194
• Lin Q, Cao P, Li K, Cao R, Zhou K, Deng H (2018). Experimental study on acoustic emission characteristics of jointed rock mass by double disc cutter. Journal of Central South University, 25(2): 357-367
• Liu J, Wan W, Xie S, Wang J (2019a). Indentation characteristics using various indenters: A study based on laboratory and numerical tests. Geotechnical and Geological Engineering, 37(6): 4919-4931
• Liu J, Wang J, Wan W, Zhao Y (2018a). The coupled influence of surface and internal crack propagation on rock breakages by indentations in biaxial states. Arabian Journal for Science and Engineering, 43(10): 5067-5077
• Liu W, Qian X, Li T, Zhou Y, Zhu X (2019b). Investigation of the tool-rock interaction using Drucker-Prager failure criterion. Journal of Petroleum Science and Engineering, 173: 269-278
• Liu W, Zhu X, Li B (2018b). The rock breaking mechanism analysis of rotary percussive cutting by single PDC cutter. Arabian Journal of Geosciences, 11(9): 1-11
• Pan Y, Liu Q, Kong X, Liu J, Peng X, Liu Q (2019a). Full-scale linear cutting test in Chongqing Sandstone and the comparison with field TBM excavation performance. Acta Geotechnica, 14(4): 1249-1268
• Pan Y, Liu Q, Liu J, Huang X, Liu Q, Peng X (2018). Comparison between experimental and semi-theoretical disc cutter cutting forces: Implications for frame stiffness of the linear cutting machine. Arabian Journal of Geosciences, 11(11): 1-20
• Pan Y, Liu Q, Peng X, Liu Q, Liu J, Huang X, Cui X, Cai T (2019b). Full-Scale linear cutting tests to propose some empirical formulas for TBM disc cutter performance prediction. Rock Mechanics and Rock Engineering, 52(11): 4763-4783
• Qiao S, Wang A, Xia Y, Liu Z, Liu J, Yang M (2018). Influence of pick layout on the performance of bolter miner cutting head. Mining Science, 25: 161–174.2018.
• Tan Q, Zhang K, Zhou Z, Xia Y. (2010), Numerical simulation and experimental observation of rock cracks under action of spherical tooth hob cutter. Chinese Journal of Rock Mechanics and Engineering. 29(1):163-69
• Tumac D, Balci C (2015). Investigations into the cutting characteristics of CCS type disc cutters and the comparison between experimental, theoretical and empirical force estimations. Tunnelling and Underground Space Technology, 45: 84-98
• Wu F, Yin L, Zhang, H, Gong, Q (2018). Rock fragmentation mechanism and efficiency under inserted-tooth roller cutter by rotary cutting test.China Journal of Highway and Transport, 31: 150-159
• Xia Y M, Guo B, Cong G Q, Zhang X H, Zeng G Y (2017). Numerical simulation of rock fragmentation induced by a single TBM disc cutter close to a side free surface. International Journal of Rock Mechanics and Mining Sciences, 91: 40-48
• Xia Y, Ouyang T, Zhang X, Luo D (2012). Mechanical model of breaking rock and force characteristic of disc cutter. Journal of Central South University, 19(7): 1846-1852
• Xia Y, Yang M, Lin L, Ji Z, Zhu Z (2021). Effect of blade angles on the shovel muck capacity and wear characteristics for TBM scraper. Arabian Journal for Science and Engineering, 46(5): 5203-5218
• Xiao N, Zhou X, Gong Q (2017). The modelling of rock breakage process by TBM rolling cutters using 3D FEM-SPH coupled method. Tunnelling and Underground Space Technology, 61: 90-103
• Xue Y, Zhou J, Liu C, Shadabfar M, Zhang J (2021). Rock fragmentation induced by a TBM disc-cutter considering the effects of joints: A numerical simulation by DEM. Computers and Geotechnics, 136: 104230
• Zare Naghadehi M, Mikaeil R (2017). Optimization of tunnel boring machine (TBM) disc cutter spacing in jointed hard rock using a distinct element numerical simulation. Periodica Polytechnica Civil Engineering, 1(61): 56-65
• Zhai S F, Zhou X P, Bi J, Xiao N (2016). The effects of joints on rock fragmentation by TBM cutters using General Particle Dynamics. Tunnelling and Underground Space Technology, 57: 162-172
• Zhang X, Liao Y, Chen Z, Xia Y, Zhang K (2021a). Study on optimum free-face condition of cutting hard rock with tunnel boring machine hob. Periodica Polytechnica Civil Engineering, 65(2): 510-521
• Zhang X, Wu J, Hu D, He M, Xia Y (2021b). Comparative study on rock breaking performances by arc and wedge TBM hob with two blades. Geotechnical and Geological Engineering, 39(6): 4581-4591
• Zou J, Yang W, Zhang T, Wang X, Gao M (2022). Experimental investigation on hard rock fragmentation of inserted tooth cutter using a newly designed indentation testing apparatus. International journal of mining science and technology. https://doi.org/10.1016/j.ijmst.2022.02.002

Identyfikatory

DOI

10.37190/msc222908