Effect of polymer fibers on pore pressure development and explosive spalling of ultra-high performance concrete at elevated temperature

• Autorzy: Zhang, Dong , Chen, Baochun , Wu, Xiangguo , Weng, Yiwei , Li, Ye
• Języki publikacji: EN

Abstrakty

EN

This paper investigated pore pressure development of ultra-high performance concrete (UHPC) included various polymer fibers, i.e., linear low-density polyethylene (LLDPE), ultra-high molecular weight polyethylene (UHMWPE), polypropylene (PP), polyester (PET), and polyamide (PA) fibers. Temperature and pore pressure were measured simultaneously at different depths of UHPC specimens subjected to one-dimensional heating. It was found that the PP and PA fibers prevented spalling of UHPC by enhancing moisture migration, which resulted in the development of pore pressure in the deeper region of the specimens. The moisture migration in UHPC with LLDPE fibers caused spalling of a layer of concrete in a deep region of specimen. UHMWPE fibers did not affect pore pressure development and spalling resistance of UHPC significantly, while with PET fibers, the pore pressure of UHPC raised sharply due to inadequate moisture migration, leading to spalling of a whole layer. Instead of melting polymer fibers and empty channels left, microcracks created by the fibers were responsible for releasing vapor pressure and spalling prevention. Fibers with high thermal expansion between 100 and 200 °C are recommended for spalling prevention of UHPC.

Słowa kluczowe

PL

odprysk eksplozyjny; beton o dużej wytrzymałości; włókno; ciśnienie porowe; podwyższona temperatura

EN

explosive spalling; ultra-high performance concretes; fibers; pore pressure; elevated temperature

• Czasopismo: Archives of Civil and Mechanical Engineering
• Rocznik: 2022
• Tom: Vol. 22, no. 4
• Strony: art. no. e187, 2022
• Opis fizyczny: Bibliogr. 41 poz., fot., rys., tab., wykr.

Twórcy

autor

Zhang, Dong

• College of Civil Engineering, Fuzhou University, Fuzhou 350108, China,

autor

Chen, Baochun

• College of Civil Engineering, Fuzhou University, Fuzhou 350108, China

autor

Wu, Xiangguo

• College of Civil Engineering, Fuzhou University, Fuzhou 350108, China

autor

Weng, Yiwei

• Department of Building and Real Estate, The Hong Kong Polytechnic University, Hong Kong, China,

autor

Li, Ye

• School of Civil and Environmental Engineering, Harbin Institute of Technology, Shenzhen, Shenzhen 518055, People’s Republic of China,

Bibliografia

• [1] Peng G-F, Niu X-J, Shang Y-J, Zhang D-P, Chen X-W, Ding H. Combined curing as a novel approach to improve resistance of ultra-high performance concrete to explosive spalling under high temperature and its mechanical properties. Cem Concr Res. 2018;109:147–58.
• [2] Abid M, Hou X, Zheng W, Hussain RR. High temperature and residual properties of reactive powder concrete—a review. Constr Build Mater. 2017;147:339–51.
• [3] Liu J-C, Tan KH, Yao Y. A new perspective on nature of fire-induced spalling in concrete. Constr Build Mater. 2018;184:581–90.
• [4] Liu J-C, Zhang Z. A machine learning approach to predict explosive spalling of heated concrete. Arch Civ Mech Eng. 2020;20:134.
• [5] Ozawa M, Subedi Parajuli S, Uchida Y, Zhou B. Preventive effects of polypropylene and jute fibers on spalling of UHPC at high temperatures in combination with waste porous ceramic fine aggregate as an internal curing material. Constr Build Mater. 2019;206:219–25.
• [6] Missemer L, Ouedraogo E, Malecot Y, Clergue C, Rogat D. Fire spalling of ultra-high performance concrete: from a global analysis to microstructure investigations. Cem Concr Res. 2019;115:207–19.
• [7] Liu J-C, Huang L, Tian Z, Ye H. Knowledge-enhanced data-driven models for quantifying the effectiveness of PP fibers in spalling prevention of ultra-high performance concrete. Constr Build Mater. 2021;299:123946.
• [8] Algourdin N, Pliya P, Beaucour AL, Simon A, Noumowé A. Influence of polypropylene and steel fibres on thermal spalling and physical-mechanical properties of concrete under different heating rates. Constr Build Mater. 2020;259:119690.
• [9] Choe G, Kim G, Gucunski N, Lee S. Evaluation of the mechanical properties of 200MPa ultra-high-strength concrete at elevated temperatures and residual strength of column. Constr Build Mater. 2015;86:159–68.
• [10] Liu J-C, Tan KH. Fire resistance of ultra-high performance strain hardening cementitious composite: residual mechanical properties and spalling resistance. Cement Concr Compos. 2018;89:62–75.
• [11] Wu H, Lin X, Zhou A. A review of mechanical properties of fibre reinforced concrete at elevated temperatures. Cem Concr Res. 2020;135:106117.
• [12] Ozawa M, Morimoto H. Effects of various fibres on high-temperature spalling in high-performance concrete. Constr Build Mater. 2014;71:83–92.
• [13] Heo Y-S, Sanjayan JG, Han C-G, Han M-C. Critical parameters of nylon and other fibres for spalling protection of high strength concrete in fire. Mater Struct. 2010;44:599–610.
• [14] Park J-J, Yoo D-Y, Kim S, Kim S-W. Benefits of synthetic fibers on the residual mechanical performance of UHPFRC after exposure to ISO standard fire. Cement Concr Compos. 2019;104:103401.
• [15] Zhang D, Tan KH. Effect of various polymer fibers on spalling mitigation of ultra-high performance concrete at high temperature. Cem Concr Compos. 2020;114:103815.
• [16] Liu J-C, Huang L, Chen Z, Ye H. A comparative study of artificial intelligent methods for explosive spalling diagnosis of hybrid fiber-reinforced ultra-high-performance concrete. Int J Civ Eng. 2022;20:639–60.
• [17] Li Y, Yang E-H, Zhou A, Liu T. Pore pressure build-up and explosive spalling in concrete at elevated temperature: a review. Constr Build Mater. 2021;284:122818.
• [18] Jansson R. Fire spalling of concrete: theoretical and experimental studies. Stockholm: KTH Royal Institute of Technology in Stockholm; 2013.
• [19] Chen X-T, Rougelot T, Davy CA, Chen W, Agostini F, Skoczylas F, Bourbon X. Experimental evidence of a moisture clog effect in cement-based materials under temperature. Cem Concr Res. 2009;39:1139–48.
• [20] der Heijden GHAV, Pel L, Adan OCG. Fire spalling of concrete, as studied by NMR. Cem Concr Res. 2012;42:265–71.
• [21] Ozawa M, Uchida S, Kamada T, Morimoto H. Study of mechanisms of explosive spalling in high-strength concrete at high temperatures using acoustic emission. Constr Build Mater. 2012;37:621–8.
• [22] Consolazio GR, McVay MC, Rish JW III. Measurement and prediction of pore pressures in saturated cement mortar subjected to radiant heating. Mater J. 1998;95:525–36.
• [23] Phan LT. Pore pressure and explosive spalling in concrete. Mater Struct. 2008;41:1623–32.
• [24] Choe G, Kim G, Yoon M, Hwang E, Nam J, Guncunski N. Effect of moisture migration and water vapor pressure build-up with the heating rate on concrete spalling type. Cem Concr Res. 2019;116:1–10.
• [25] Felicetti R, Lo Monte F, Pimienta P. A new test method to study the influence of pore pressure on fracture behaviour of concrete during heating. Cem Concr Res. 2017;94:13–23.
• [26] Kalifa P, Chene G, Galle C. High-temperature behaviour of HPC with polypropylene fibres: From spalling to microstructure. Cem Concr Res. 2001;31:1487–99.
• [27] Li Y, Pimienta P, Pinoteau N, Tan KH. Effect of aggregate size and inclusion of polypropylene and steel fibers on explosive spalling and pore pressure in ultra-high-performance concrete (UHPC) at elevated temperature. Cement Concr Compos. 2019;99:62–71.
• [28] Yang J, Peng G-F, Zhao J, Shui G-S. On the explosive spalling behavior of ultra-high performance concrete with and without coarse aggregate exposed to high temperature. Constr Build Mater. 2019;226:932–44.
• [29] Zhang D, Shahin MA, Yang Y, Liu H, Cheng L. Effect of microbially induced calcite precipitation treatment on the bonding properties of steel fiber in ultra-high performance concrete. J Build Eng. 2022;50:104132.
• [30] Bangi MR, Horiguchi T. Effect of fibre type and geometry on maximum pore pressures in fibre-reinforced high strength concrete at elevated temperatures. Cem Concr Res. 2012;42:459–66.
• [31] Liu J-C, Tan KH. Fire resistance of strain hardening cementitious composite with hybrid PVA and steel fibers. Constr Build Mater. 2017;135:600–11.
• [32] Zhang D, Tan KH, Dasari A, Weng Y. Effect of natural fibers on thermal spalling resistance of ultra-high performance concrete. Cement Concr Compos. 2020;109:103512.
• [33] Zheng W, Luo B, Wang Y. Microstructure and mechanical properties of RPC containing PP fibres at elevated temperatures. Mag Concr Res. 2014;66:397–408.
• [34] Zhang D. Spalling resistance of fiber embedded ultra-high performance concrete. Singapore: Nanyang Technological University; 2020.
• [35] Li Y, Yang E-H, Tan KH. Flexural behavior of ultra-high performance hybrid fiber reinforced concrete at the ambient and elevated temperature. Constr Build Mater. 2020;250:118487.
• [36] Zhang D, Tan KH, Dasari A. Role of polymer fibres in prevention of explosive spalling in ultra-high performance concrete. In: Nadjai A, Ali F, Franssen J-M, Vassart O, editors. 10th international conference on structures in fire SiF’18Belfast, United Kingdom; 2018. p. 85–91.
• [37] Mindeguia J-C, Pimienta P, Noumowé A, Kanema M. Temperature, pore pressure and mass variation of concrete subjected to high temperature—experimental and numerical discussion on spalling risk. Cem Concr Res. 2010;40:477–87.
• [38] Bangi MR, Horiguchi T. Pore pressure development in hybrid fibre-reinforced high strength concrete at elevated temperatures. Cem Concr Res. 2011;41:1150–6.
• [39] Kalifa P, Menneteau F-D, Quenard D. Spalling and pore pressure in HPC at high temperatures. Cem Concr Compos. 2000;30:1915–27.
• [40] Ichikawa Y. Prediction of pore pressures, heat and moisture transfer leading to spalling of concrete during fire. London: Imperial College; 2000.
• [41] Zhang D, Dasari A, Tan KH. On the mechanism of prevention of explosive spalling in ultra-high performance concrete with polymer fibers. Cem Concr Res. 2018;113:169–77.

Uwagi

PL

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023)

Identyfikatory

DOI

10.1007/s43452-022-00520-7