Application of laser techniques in furniture decoration

• Autorzy: Swaczyna I. , Bak J. , Owczarek M.

Warianty tytułu

PL

Zastosowanie lasera do zdobienia mebli

• Języki publikacji: EN

Abstrakty

EN

Decoration motives made on wood surfaces were described in this paper. The motives were engraved as linear patterns, for further incrustation. Moreover, the researches were carried out on cutting the inlay pattern and joints with different kind of laser - both pulse- and continuous-working ones. It was found that laser can be successfully used for wood element's decorations. Final results of this process depends on laser kind as well as processing parameters (laser's power, and feed among others), that should be carefully adjusted to properties of processed wood.

PL

W pracy opisano wykonanie motywów zdobiących powierzchnię drewna. Uzyskano je przez grawerowanie wzorów linearnych, które mogą być inkrustowane. Ponadto wypalanie wzorów, wycinanie intarsji i złączy, które mogą być także elementami dekoracyjnymi. Używano różnych laserów - o pracy ciągłej i przerywanej. Stwierdzono, że laser może być wykorzystany do zdobienia elementów mebli lub innych wyrobów. Efekty końcowe zależą od rodzaju lasera i parametrów cięcia (mocy lasera i prędkości posuwu głowicy) dobieranych do rodzaju obrabianego drewna.

• Wydawca: -
• Czasopismo: Annals of Warsaw Agricultural University. Forestry and Wood Technology
• Rocznik: 2005
• Tom: 57
• Opis fizyczny: p.230-234,fig.,ref.

Twórcy

autor

Swaczyna I.

• Department of Technology, Organisation and Management in Wood Industry, Faculty of Wood Technology, Warsaw Agricultural University - SGGW, Nowoursynowska 159, 02-776 Warsaw, Poland

autor

Bak J.

autor

Owczarek M.

Bibliografia

• 1. BĄK J., 2003: Laser's application for decoration motives burning in wood. Master's thesis under supervision of I. Swaczyna, Department of Construction and Technology of Final Wood Products. Warsaw
• 2. SWACZYNA I., BEER P., 1994: Researches on gluing ability of wood after laser cutting. VIII National Electro optics Workshop: Laser techniques in material processing. June, 6th-9th 1994, p.237-248, Gdańsk-Wyspa Sobieszowska.
• 3. SWACZYNA I., BEER P., 1995: Wood surface description after cutting with C02 with continuous and pulse working. Przemysł drzewny (Wood industry) nr 11, p.9-13. Warsaw.
• 4. VOGELGESANG M., 1999: Influence of wood moisture content on laser's cutting quality. Master's thesis under supervision of I. Swaczyna, Department of Construction and Technology of Final Wood Products, Warszawa
• 5. SWACZYNA I., KLIMCZEWSKI M., KWIECIŃSKA К., 1994: New technique of incrustation of wood surface's decorated with linear patterns. 8th Scientific Conference of Faculty of Wood Technology, SGGW: New technologies in surface decoration of wood and wood-based panels. November 15thl994, p.65-71.
• 6. OWCZAREK M., 2004: Incrustation metod for linear, laser-burned patterns In wood. Master's thesis under supervision of I. Swaczyna, Department of Construction and Technology of Final Wood Products. Warsaw
• 7. GRĄBCZEWSKI Z., 1992: Analysis of ability of inlay finish in serial production. Master's thesiss under supervision of I. Swaczyna, Department of Construction and Technology of Final Wood Products Warsaw
• 8. SWACZYNA I, GRĄBCZEWSKI Z„ 1993: Laser cut of inlay. IV Sympodium of Laser Technique, September 26th-30th 1993, p.349-350, Szczecin-Świnoujście.
• 9. SWACZYNA I., BEER P., 1994: The Trials in Using a Low Quality Wood for Laser- Cut Marguetry.lst European Training Seminar. Technologies for Transforming and Utilizing Wood of secondary Quality. December 7,8,9 1994. pl-15..Ensam Cluny - France.
• 10. SWACZYNA I., 1995: Furniture. Repairing and renovation. PWRiL. Warsaw. P. 132- 134.
• 11. TRZCIŃSKI J.,1996: Trials on laser cutting of wood joints. Master's thesis under supervision of I. Swaczyna, Department of Construction and Technology of Final Wood Products

Uwagi

PL

Rekord w opracowaniu