Microstructures and electrode performances of Mg50Ni(50-X)Pdx alloys

• Autorzy: Sydney Santos , José Castro , Edson Ticianelli
• Języki publikacji: EN

Abstrakty

EN

Magnesium and several of its alloys can absorb large amounts of hydrogen. This feature is desirable for several technological applications such as solid state hydrogen storage tanks and anodes of nickel-metal hydride (Ni-MH) batteries. For the latter, Mg-Ni alloys are considered very promising due to their high discharge capacities. Conversely, the low stability of Mg-Ni alloys in alkaline electrolytes have hindered their practical use. In the present manuscript, the effects of palladium black addition on the structure and electrochemical properties of the Mg50Ni50 (in at.%) alloy were investigated. The studied ternary alloys have general composition of Mg50Ni(50-x)Pdx, with 0 ≤ x ≤ 5 (in at.%). These alloys were synthesized by mechanical alloying from pure elements. The alloy powders were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray absorption spectroscopy (XAS) while their electrode performances were evaluated by galvanostatic cycles of charge and discharge. The investigated alloys have multi-phase structures composed of amorphous and nanocrystalline phases, with nano-grain sizes of nearly 5 nm. Concerning the electrode performance, the best results were attained by the Mg50Ni47.5Pd2.5 alloy, which kept a high discharge capacity and improved the cycling stability. [...]

Słowa kluczowe

EN

Nickel - metal hydride batteries; Hydrogen storage alloys; Mechanical alloying

• Czasopismo: Open Chemistry
• Rocznik: 2013
• Tom: 11
• Numer: 4
• Strony: 485-491

Daty

wydano

2013-04-01

online

2013-01-23

Twórcy

autor

Sydney Santos

• CECS, UFABC, 09.210-170, Santo André — SP, Brazil,

autor

José Castro

• MHNano Ltd., 13566-445, São Carlo, SP, Brazil

autor

Edson Ticianelli

• IQSC, USP, CP 780 13560-970, São Carlos — SP, Brazil

Bibliografia

• [1] M.A. Fetcenko, S.R. Ovshinsky, B. Reichman, K. Young, C. Fierro, A. Zallen, W. Mays, T. Ouchi, J. Power Sources 165, 544 (2007) http://dx.doi.org/10.1016/j.jpowsour.2006.10.036[Crossref]
• [2] S.F. Santos, T.T. Ishikawa, E.A. Ticianelli, In: J.R. Telle, N.A. Pearstine (Eds.), Amorphous Materials: Research, Technology and Applications (Nova Science, New York, 2009) 219
• [3] P.H.L. Notten, M. Ouwerkerk, H. van Hal, D. Beelen, W. Keur, J. Zhuo, H. Feil, J. Power Sources 129, 45 (2004) http://dx.doi.org/10.1016/j.jpowsour.2003.11.019[Crossref]
• [4] X. Zhao, L. Ma, Int. J. Hydrogen Energy 34, 4788 (2009) http://dx.doi.org/10.1016/j.ijhydene.2009.03.023[Crossref]
• [5] S.F. Santos, J.F.R. de Castro, T.T. Ishikawa, E.A. Ticianelli, J. Alloys Compd. 434, 756 (2007) http://dx.doi.org/10.1016/j.jallcom.2006.08.153[Crossref]
• [6] S.F. Santos, J.F.R. de Castro, T.T. Ishikawa, E.A. Ticianelli, J. Mater. Sci. 43, 2889 (2008) http://dx.doi.org/10.1007/s10853-007-1924-z[Crossref]
• [7] C. Rongeat, L. Roué, J. Alloys Compd, 404, 679 (2005) http://dx.doi.org/10.1016/j.jallcom.2004.11.118[Crossref]
• [8] E.C. Souza, J.F.R. de Castro, E.A. Ticianelli, J. Power Sources 160, 1425 (2006) http://dx.doi.org/10.1016/j.jpowsour.2006.03.018[Crossref]
• [9] L.-J. Huang, Y.-X. Wang, J.-G. Tang, J.-Q. Liu, Y. Wang, J.-X. Liu, Z. Huang, Int. J. Electrochem. Sci. 6, 6200 (2011)
• [10] J.-J. Jiang, M. Gasik. J. Power Sources 89, 117 (2000) http://dx.doi.org/10.1016/S0378-7753(00)00400-6[Crossref]
• [11] E. Souza, E.A. Ticianelli, Int. J. Hydrogen Energy 32, 4917 (2007) http://dx.doi.org/10.1016/j.ijhydene.2007.07.024[Crossref]
• [12] J.F.R. de Castro, S.F. Santos, F.R. Nikkuni, T.T. Ishikawa, E.A. Ticianelli, J. Alloys Compd. 498, 57 (2010) http://dx.doi.org/10.1016/j.jallcom.2010.03.097[Crossref]
• [13] L. Zaluski, A. Zaluska, P. Tessier, J.O. Ström-Olsen, R. Schulz, Mater. Sci. Forum 225, 853 (1996) http://dx.doi.org/10.4028/www.scientific.net/MSF.225-227.853[Crossref]
• [14] T. Ma, Y. Hatano, T. Abe, K. Watanabe, J. Alloys Compd. 372, 251 (2004) http://dx.doi.org/10.1016/j.jallcom.2003.09.148[Crossref]
• [15] S.-I. Yamaura, H.-Y. Kim, H. Kimura, A. Inoue, Y. Arata, J. Alloys Compd. 347, 239 (2002) http://dx.doi.org/10.1016/S0925-8388(02)00759-4[Crossref]
• [16] C. Rongeat, M.H. Grosjean, S. Ruggeri, M. Dehmas, S. Bourlot, S. Marcotte, L. Roué, J. Power Sources 158, 747 (2006) http://dx.doi.org/10.1016/j.jpowsour.2005.09.006[Crossref]
• [17] Y. Hatano, T. Tachikawa, D. Mu, T. Abe, K. Watanabe, S. Morozumi, J. Alloys Compd. 330, 816 (2002) http://dx.doi.org/10.1016/S0925-8388(01)01455-4[Crossref]
• [18] S.-C. Han, P.S. Lee, J.-Y. Lee, A. Zuttel, L. Schlapbach, J Alloys Compd 306, 219 (2000) http://dx.doi.org/10.1016/S0925-8388(00)00753-2[Crossref]
• [19] H. Ye, Y.Q. Lei, L.S. Chen, H. Zhang, J. Alloys Compd. 311, 194 (2000) http://dx.doi.org/10.1016/S0925-8388(00)01130-0[Crossref]
• [20] H. Y. Lee, N. H. Goo, W. T. Jeong, K. S. Lee, J. Alloys Compd. 313, 258 (2000) http://dx.doi.org/10.1016/S0925-8388(00)01205-6[Crossref]
• [21] T.B. Massalski, ASM/NIST Data Program for Alloy Phase Diagrams on CD-ROM, OH 44073, USA.
• [22] M. Nakagawa, S. Matsuya, K. Udoh, Dental Mater. J. 21, 83 (2002) http://dx.doi.org/10.4012/dmj.21.83[Crossref]
• [23] A.J. Maeland, G.G. Libowitz, J. Less-Commomn Metals 101, 131 (1984) http://dx.doi.org/10.1016/0022-5088(84)90091-2[Crossref]
• [24] R. Kirchheim, F. Sommer, G. Schluckebier, Acta Metall. 30, 1059 (1982) http://dx.doi.org/10.1016/0001-6160(82)90002-5[Crossref]
• [25] W. Liu, H. Wu, Y. Lei, Q. Wang, J. Wu, J. Alloys Compd. 252, 234 (1997) http://dx.doi.org/10.1016/S0925-8388(96)02735-1[Crossref]

Identyfikatory

DOI

10.2478/s11532-012-0182-3