The effect of chemical activation method on properties of activated carbons obtained from pine cones

• Autorzy: Piotr Nowicki , Izabela Kuszyńska , Jacek Przepiórski , Robert Pietrzak
• Języki publikacji: EN

Abstrakty

EN

A method for obtaining carbonaceous adsorbents from pine cones by chemical activation with NaOH is described. Activated carbons were obtained by two methods of activation (physical mixing and impregnation) and two variants of thermal treatment. It has been shown that pine cones can be successfully used as cheap precursor of carbonaceous adsorbents of well-developed surface area, large pore volume and good sorption properties. All activated carbon samples obtained show strongly microporous structure and surface of acidic character. The best physicochemical properties and greatest sorption capacity towards iodine were found for the carbon samples obtained by physical mixing of the precursor with the activating agent and then subjected to thermal activation at 600°C.

Słowa kluczowe

EN

Pine cones; Chemical activation; Impregnation; Physicochemical properties

• Czasopismo: Open Chemistry
• Rocznik: 2013
• Tom: 11
• Numer: 1
• Strony: 78-85

Daty

wydano

2013-01-01

online

2012-10-24

Twórcy

autor

Piotr Nowicki

• Adam Mickiewicz University

autor

Izabela Kuszyńska

• Adam Mickiewicz University

autor

Jacek Przepiórski

• West Pomeranian University of Technology

autor

Robert Pietrzak

• Adam Mickiewicz University,

Bibliografia

• [1] J. Guo, A. C. Lua, Micropor. Mesopor. Mat. 32, 111 (1999) http://dx.doi.org/10.1016/S1387-1811(99)00096-7[Crossref]
• [2] J. Hayashi, T. Horikawa, K. Muroyama, V. G. Gomes, Micropor Mesopor. Mat. 55, 63 (2002) http://dx.doi.org/10.1016/S1387-1811(02)00406-7[Crossref]
• [3] P. Nowicki, R. Pietrzak, Bioresour. Technol. 101, 5802 (2010) http://dx.doi.org/10.1016/j.biortech.2010.02.098[Crossref]
• [4] D. Adinata, W.M.A. Wan Daud, M.K. Aroua, Bioresour. Technol. 98, 145 (2007) http://dx.doi.org/10.1016/j.biortech.2005.11.006[Crossref]
• [5] Y. Guo, D.A. Rockstraw, Bioresour. Technol 98, 1513 (2007) http://dx.doi.org/10.1016/j.biortech.2006.06.027[Crossref]
• [6] S. Ichcho, E. Khouya, S. Fakhi, M. Ezzine, H. Hannache, R. Pallier, R. Naslain, J. Hazard. Mater. 118, 45 (2005) http://dx.doi.org/10.1016/j.jhazmat.2004.10.009[Crossref]
• [7] M.M. Karim, A.K. Das, S.H. Lee, Anal. Chim. Acta, 576, 37 (2006) http://dx.doi.org/10.1016/j.aca.2006.01.079[Crossref]
• [8] R. Pietrzak, Energy Fuels 23, 3617 (2009) http://dx.doi.org/10.1021/ef9002796[Crossref]
• [9] P. Nowicki, R. Pietrzak, H. Wachowska, Catal. Today 150, 107 (2010) http://dx.doi.org/10.1016/j.cattod.2009.11.009[Crossref]
• [10] P. Nowicki, H. Wachowska, R. Pietrzak, J. Hazard. Mater. 181, 1088 (2010) http://dx.doi.org/10.1016/j.jhazmat.2010.05.126[Crossref]
• [11] P. Nowicki, M. Skrzypczak, R. Pietrzak, Chem. Eng. J. 162, 723 (2010) http://dx.doi.org/10.1016/j.cej.2010.06.040[Crossref]
• [12] J. Yang, K. Qiu, Chem. Eng. J. 165, 209 (2010) http://dx.doi.org/10.1016/j.cej.2010.09.019[Crossref]
• [13] H. Dolas, O. Sahin, C. Saka, H. Demir, Chem. Eng. J. 166, 191 (2011) http://dx.doi.org/10.1016/j.cej.2010.10.061[Crossref]
• [14] A. Bhatnagar, M. Sillanpaa, Chem. Eng. J. 157, 277 (2010 http://dx.doi.org/10.1016/j.cej.2010.01.007[Crossref]
• [15] I. Kula, M. Ugurlu, H. Karaoglu, A. Elik, Bioresour. Technol. 99, 429 (2008) http://dx.doi.org/10.1016/j.biortech.2007.01.015[Crossref]
• [16] G. Duman, Y. Onal, C. Okutucu, S. Onenc, J. Yanik, Energy & Fuels 23, 2197 (2009) http://dx.doi.org/10.1021/ef800510m[Crossref]
• [17] M. Momčilović, M. Purenović, A. Bojić, A. Zarubica, M. RanĐelović, Desalination 276, 53 (2011) http://dx.doi.org/10.1016/j.desal.2011.03.013[Crossref]
• [18] M.E. Argun, S. Dursu, M. Karatas, M. Guru, Bioresour. Technol. 99, 8691 (2008) http://dx.doi.org/10.1016/j.biortech.2008.04.014[Crossref]
• [19] A.E. Ofomaja, E.B. Naidoo, S.J. Modise, J. Hazard. Mater. 168, 909 (2009) http://dx.doi.org/10.1016/j.jhazmat.2009.02.106[Crossref]
• [20] J. Choma, M. Jaroniec, In T.J. Bandosz (Ed.), Characterisation of nanoporous carbons by using gas adsorption isotherms. Activated Carbon Surfaces in Environmental Remediation (Elsevier Ltd., Amsterdam, 2006) 107

Identyfikatory

DOI

10.2478/s11532-012-0140-0