Nowa wersja platformy, zawierająca wyłącznie zasoby pełnotekstowe, jest już dostępna.
Przejdź na https://bibliotekanauki.pl

PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Czasopismo
2015 | 13 | 1 |
Tytuł artykułu

Synthesis of bio-active titanium oxide coatings stimulated by electron-beam plasma

Treść / Zawartość
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Advantages of the electron-beam plasma (EBP) for production of bioactive titanium oxide coatings were experimentally studied. The coatings were synthesized in EBP of oxygen on the surface of plane titanium substrates. A number of analytical techniques were used to characterize morphology, chemical composition, and structure of the synthesized titanium oxide. The analysis showed the titanium oxide (IV) in the rutile form to predominate in the coatings composition. The samples with plasmachemically synthesized TiO2-coatings were more hydrophilic than untreated titanium. The effect was stable during two weeks and then the degradation of the wettability began. The EBP-stimulated TiO2 synthesis improved the hydroxyapatite formation on the surface of plane titanium substrates. The EBP-stimulated TiO2 synthesis is promising technique to produce bioactive coatings on the surface of titanium medical dental and bone implants. The computer simulation of plasma-surface interaction was carried out to predict the plasma composition, to find the spatial distribution of the sample temperature, and to calculate the flows of the chemically active plasma particles bombarding the tube wall. The flows of atomic and singlet oxygen were found to be the most intensive and, therefore, these particles are likely to be responsible for the formation of the biocompatible TiO2-coaings.
Wydawca

Czasopismo
Rocznik
Tom
13
Numer
1
Opis fizyczny
Daty
otrzymano
2013-12-29
zaakceptowano
2014-03-17
online
2014-11-17
Twórcy
  • Moscow Institute of Physics and Technology, 141700 Dolgoprudny, Moscow region, Russia, protein7@rambler.ru
autor
  • Moscow Institute of Physics and Technology, 141700 Dolgoprudny, Moscow region, Russia
  • Moscow Institute of Physics and Technology, 141700 Dolgoprudny, Moscow region, Russia
autor
  • Moscow Institute of Physics and Technology, 141700 Dolgoprudny, Moscow region, Russia
Bibliografia
  • [1] Park J.B., Lakes R.S., Biomaterials an Introduction, Plenum Press, New York, 1992
  • [2] Lin F.H., Hsu Y.S., Lin S.H., Chen T.M., Mater. Chem. Phys., 2004, 87, 24[Crossref]
  • [3] Massaro C., Rotolo P., De Riccardis F., Milella E., Napoli A., Wieland M., et al., J. Mater. Sci. Mater. Med., 2002, 13, 535[Crossref]
  • [4] Kim H.W., Kim H.E., Salih V., Knowles J.C., J. Biomed. Mater. Res. B Appl. Biomater., 2004, 72B, 1
  • [5] Park J.B., Kim Y.S., Lee G., Yun B.G., Kim C.H., J. Tissue. Eng. Regen. Med., 2013, 10, 115[Crossref]
  • [6] Dudek A., Arch. Metall. Mater., 2011, 56, 135
  • [7] Boyd A.R., Burke G.A., Duffy H., Holmberg M., O’Kane C., Meenan B.J., Kingshott P., J. Mater. Sci. Mater. Med., 2011, 22, 71[Crossref]
  • [8] Shtansky D.V., Kiryukhantsev-Korneev P.V., Bashkova I.A., Sheveiko A.N., Levashov E.A., Int. J. Refract. Met. Hard Mater., 2010, 28, 32[Crossref]
  • [9] Katayama H., Katto M., Nakayama T., Surf. Coat.Technol., 2009, 204, 135
  • [10] Roy M., Balla V.K., Bandyopadhyay A., Bose S., Acta Biomater., 2011, 7, 866[Crossref]
  • [11] Rautray T.R., Narayanan R., Kwon T.Y., Kim K.H., Thin Solid Films, 2010, 518, 3160
  • [12] Sobieszczyk S., Zieliński A., Adv. Mater. Sci., 2008, 8, 35
  • [13] Yoshinari M., Watanabe Y., Ohtsuka Y., Derand T., J. Dent. Res., 1997, 76, 1485[Crossref]
  • [14] Bai X., More K., Rouleau C.M., Rabiei A., Acta Biomater., 2010, 6, 2264[Crossref]
  • [15] Vasiliev M.N., In: Fortov V.E. (Ed.), Encyclopedia of low-temperature plasma, Nauka, Moscow, 2001, V IX 436 [WoS]
  • [16] Greenler R.G., J. Chem. Phys., 1969, 50, 1963
  • [17] Transferetti B.C., Davanzo C.U., Zoppi R.A., Cruz N.C., Moraes M.A.B., Phys. Rev. B., 2001, 64, 125404[Crossref]
  • [18] Zhang J.Y., Boyd I.W., O`Sullivan B.J., Hurly P.K., Kelly P.V., Senateur J.P., J. Non-Sryst. Solids, 2002, 303, 134
  • [19] Bellamy L.J., The infrared spectra of complex molecules, Methuen & Co., London, 1954
  • [20] Van der Houwen J.A.M., Cressey G., Cressy B.A., Valsami-Jones E., J. Cryst. Growth, 2003, 96, 249
  • [21] Rapacz-Kmita A., Elosarczyk A., Paszkiewicz Z.C., Paluszkiewicz C., J. Mol. Struct., 2004, 65, 704
  • [22] Berzina-Cimdina L., Borodajenko N., In: T. Theophanides (Ed.), Infrared spectroscopy – Materials science, engineering and technology, 2012, 123
  • [23] Sato K., Kumagai Y., Tanaka J., J. Biomed. Mater. Res., 2000, 50, 16[Crossref]
  • [24] Kokubo T., Ito S., Huang Z.T., Hatashi T., Sakka S., Kitsugi T., Yamamuro T., J. Biomed. Mater. Res., 1990, 24, 331[Crossref]
  • [25] Vasilieva T.M., IEEE Transac. Plasma Sci., 2010, 38, 1903[Crossref]
  • [26] Vasilieva T.M., Bayandina D.V., Instr. Exp. Tech., 2010, 53, 289
  • [27] Thull R., Grant D., In: Brunette D.M. (Ed.), Titanium in Medicine: Material Science, Surface Science, Engineering, Biological Responses and Medical Applications, Springer-Verlag, Berlin and Heidelberg, 2001, 283
  • [28] Handbook of Deposition Technologies for Film and Coatings, 2nd edition, Noyes, Park Ridge, NJ, 1994
  • [29] Yuan Y., Lee T.R., In: Bracco G., Holst B. (Eds.), Surface Science Techniques, Springer-Verlag, Berlin and Heidelberg, 2013, 3
  • [30] Aleksandrov N.L., Vasiliev M.N., Lysenko S.L., Negodaev S.S., In: 4-th European Conference for Aerospace Sciences, 4-8 July 2011, S-Petersburg, Russia
  • [31] Aleksandrov N.L., Konovalov V.P., Son E.E., In: Son E.E. (Ed.), Encyclopedia of low-temperature plasma, Yanus-K, Moscow, 2010, Ser. B. V III-3, 265
  • [32] Aleksandrov N.L., Vasiliev M.N., Lysenko S.L., Mahir A.Kh., Plasma Physics Reports, 2005, 31, 425[WoS]
  • [33] Kutasi K., Sa P.A., Guerra V., J. Phys. D: Appl. Phys., 2012, 45, 19205
Typ dokumentu
Bibliografia
Identyfikatory
Identyfikator YADDA
bwmeta1.element.-psjd-doi-10_1515_chem-2015-0015
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.