Ograniczanie wyników
Czasopisma help
Autorzy help
Lata help
Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 305

Liczba wyników na stronie
first rewind previous Strona / 16 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  pojazd elektryczny
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 16 next fast forward last
EN
The paper focuses on the most frequently used systems for storing energy recovered during vehicle braking are presented in this paper. Various solutions relying mainly on electrochemical batteries were analysed. The attention is also concentrated on systems that enable storing large amounts of energy using supercapacitors, and kinetic energy accumulators as the alternative approach.
PL
W artykule omówiono najczęściej stosowane układy magazynowania energii odzyskanej podczas hamowania pojazdu. Przeanalizowano różne rozwiązania oparte głównie o zastosowanie akumulatorów elektrochemicznych. Przedstawiono również układy zdolne do magazynowania dużych ilości energii poprzez wykorzystanie superkondensatorów oraz alternatywną propozycję - w postaci akumulatorów energii kinetycznej.
PL
To oczywisty ekologiczny absurd, ale rzetelna analiza ekonomiczna wskazuje, że w polskich realiach opłacalne jest ładowanie akumulatorów samochodów elektrycznych za pomocą agregatów na olej napędowy. Opłaca się też kupowanie "elektryków” tylko po to, by ich… nie używać, a trzymać bezczynne i bezrobotne auta oraz maszyny w garażu.
PL
Przedmiotem artykułu jest opis budowy i zasady działania oraz prezentacja wyników badań elektromechanicznego zespołu napędowego dedykowanego napędom elektrycznym i hybrydowym pojazdów samochodowych. Konstrukcja zespołu składa się z głównego silnika napędowego, dwóch silników pomocniczych oraz zespołu dwóch przekładni planetarnych. Każdy z silników zasilany jest z oddzielnego falownika, a ich pracą zarządza centralna jednostka sterująca w oparciu o założony algorytm.
EN
The subject of the article is a description of the construction and operating principles, as well as the presentation of the electromechanical drive unit, dedicated to drive electric and hybrid vehicles, research results. This unit contain main electric motor, additional two auxiliary motors and two planetary gear units. Each motor is powered by a separate inverter, and their operation is managed by a central control unit based on an established algorithm.
4
Content available remote Electric means of urban transport in practice
EN
Currently, great attention is paid to environmental protection issues in the context of the impact of transport on the environment. Most research and analyzes on electromobility indicate that vehicles using electricity produce less pollution than vehicles powered by an internal combustion engine. Another problem is the number of vehicles on the road, causing traffic jams. A diminutive form of personal transport around the city can be proposed to reduce the number of motor vehicles on the streets. The proposed urban electric vehicle is a four-wheeled vehicle powered by a charging station based on renewable energy sources. It is intended mainly for transporting people with specific disabilities. It is intended mainly for transporting older people and people with specific disabilities. For health reasons, these people cannot use publicly available means of personal transport such as an electric scooter or an electric bicycle. The vehicle can handle bicycle paths, parks, and short distances. The use of the GPS and Line Follower systems based on the adaptation of the infrastructure to this vehicle will ensure its full autonomy. This article presents simulation tests of air resistance while driving using SOLIDWORKS Flow Simulation, then examines the technical parameters of the vehicle in real conditions, i.e., city driving. The research results turn out to be promising because the use of such a vehicle seems to be practical.
PL
Obecnie bardzo dużą wagę przykłada się do zagadnień ochrony środowiska naturalnego w kontekście wpływu transportu na środowisko. Większość badań i analiz dotyczących elektromobilności wskazuje, że pojazdy wykorzystujące energię elektryczną produkują mniej zanieczyszczeń niż pojazdy napędzane silnikiem spalinowym. Dąży się do ograniczenia emisji zanieczyszczeń. Kolejnym problemem jest duża ilość pojazdów poruszających się po drogach, powodujące korki drogowe. W celu zmniejszenia liczby pojazdów samochodowych na ulicach można zaproponować niewielki środek transportu osobistego poruszający się po mieście. Zaproponowany przez nas miejski pojazd elektryczny to pojazd czterokołowy zasilany stacją ładującą opartą na odnawialnych źródłach energii. Przeznaczony jest głównie do transportu osób z pewnymi dysfunkcjami oraz osób starszych. Osoby te nie mogą korzystać z przyczyn zdrowotnych z ogólnodostępnych środków transportu osobistego jak: hulajnoga elektryczna lub rower elektryczny . Pojazd poradzi sobie na ścieżkach rowerowych, w parkach oraz na krótkich dystansach w mieście. Wykorzystanie systemu GPS oraz systemu Line Follower w oparciu o dostosowanie infrastruktury do owego pojazdu zapewni mu pełną autonomiczność. W niniejszym artykule przedstawiono badania symulacyjne oporu powietrza podczas jazdy za pomocą SOLIDWORKS Flow Simulation, następnie przedstawiono badania parametrów technicznych pojazdu w warunkach rzeczywistych, czyli jazdy po mieście. Wyniki badań okazują się być obiecujące, ponieważ zastosowanie takiego pojazdu wydaje się być praktyczne.
PL
W artykule omówiono prace rozwojowe nad układem sterowania pojazdu elektrycznego z uwzględnieniem ograniczeń jednostki napędowej TM4 Sumo. Szczególną uwagę poświęcono opracowaniu nowego algorytmu sterowania końcową fazą hamowania (za pomocą retardera) przy niskich wartościach prędkości, poprzez zastosowanie autorskich regulatorów opartych na predykcji wartości siły hamowania. Opracowany przez Autorów algorytm jest uniwersalny (działa z różnymi jednostkami napędowymi) automatycznie dostosowując wartości nastaw. Jednocześnie autorzy zwrócili szczególną uwagę na eliminację zjawiska oscylacji wartości momentu obrotowego silnika w końcowej fazie hamowania oraz synergię klasycznego układu hamulcowego pojazdu użytkowego z hamowaniem napędem elektrycznym. W artykule omówiono również autorskie narzędzia i oprogramowanie do monitorowania i zbierania danych pomiarowych z pojazdów elektrycznych. Algorytm sterowania jest jednym z produktów oferowanych na rynku jako rozwiązanie dostarczane przez DIGA Spółka Cywilna. Prezentowane wyniki zostały zebrane z obiektów rzeczywistych w ramach prze-prowadzonych przez autorów wdrożeń.
EN
The article discusses development work on the control system of an electric vehicle considering the limitations of the TM4 Sumo power unit. Particular attention was focused on the development of a new algorithm for controlling the final phase of braking (using a retarder) at low speeds, using proprietary regulators based on the prediction of braking force values. The developed algorithm is universal (works with various drive units) automatically adjusting the setting values. At the same time, the authors paid particular attention to the elimination of the phenomenon of oscillation of the engine torque value in the final phase of braking and the synergy of the classic braking system of a commercial vehicle with electric drive braking. The article also discusses proprietary tools and software for monitoring and collecting measurement data from electric vehicles. The control algorithm is one of the products offered on the market as a solution provided by the DIGA Civil Partnership. The presented results were collected from real objects as part of implementations carried out by the authors.
PL
Zgodnie z danymi przedstawionymi przez analityków z IHS Markit w 2020 roku, na świecie sprzedano ponad 2,5 miliona baterii samochodowych. Według szacunków specjalistów, globalny wzrost zapotrzebowania na tego rodzaju produkty sprawi, że do 2030 roku pojazdy elektryczne będą miały 32% całkowitego udziału w rynku sprzedaży nowych aut. Pomimo różnego rodzaju rozporządzeń i dyrektyw nakazujących ograniczanie sprzedaży i użytkowania akumulatorów kwasowo-ołowiowych to właśnie one nadal będą dominowały na rynku, nawet w perspektywie dziesięcioleci. Jednak ich produkcja i recykling są szkodliwe dla środowiska i zdrowia ludzi.
EN
The transformation of the automotive industry towards electromobility is a key step in achieving a sustainable transportation system. To analyze the economic feasibility of electric vehicles (EVs) compared to internal combustion engine vehicles (ICEs), this study assessed the operating costs of both types of vehicles, including fueling and charging costs on a selected theoretical route. The analysis of economic aspects also examined the development of fueling and charging infrastructure and the impact of government programs promoting electromobility. The study employs a comparative analysis of ICE and EV based on fuel and electricity prices, insurance costs, and servicing expenses. The results of the analysis indicate that adopting EVs can lead to significant economic benefits, especially when coupled with government incentives and well-developed charging infrastructure. The network of charging stations and fuel infrastructure serves as an indicator of the market conditions for vehicles equipped with either internal combustion engines or electric powertrains, and forecasts help anticipate their future directions. The decreased pace of new petrol stations being established may indicate a weakening market for internal combustion engine vehicles compared to previous periods. This study highlights the economic aspects of electromobility strategies aimed at accelerating the transition towards a sustainable transportation system.
EN
The European Union is set to become the world’s first climate-neutral continent in 2050. Achieving such an ambitious goal requires cross-cutting measures in all key sectors of the economy, including transport, which is one of the main sources of emissions in Member States, including Poland. Electromobility is a key instrument for reducing the negative impact of transport on climate and the environment. The current automotive market in Poland, for the most part, is made up of old combustion engine cars. The average age of a passenger car in Poland in 2021 was 14.5 years, 0.2 years more than in 2020. An important point to note is that in 2021, nearly twice as many used cars were imported into Poland as new cars were sold, and this was 11.3% higher than the figure recorded in 2020. At the same time, 48% of the cars were equipped with diesel engines. Thus, it is reasonable to identify the current state of knowledge of e-mobility and its assessment by young consumers (18- to 25-year-olds). How they perceive such vehicles is of great importance. Young buyers are a special group in the automotive market - their purchasing preferences will determine the nature of the car market in the future, including whether it will be zero-emission. Learning about the opinions of young consumers is important. On the one hand, it allows knowledge to be gained about the beliefs, feelings, and level of interest in this type of car and the actions young people want to take regarding purchase and use. On the other hand, knowledge of their attitudes towards electric cars can be the basis for creating more relevant information messages. Such information may also be significant for companies and institutions involved in introducing electric cars to the Polish market and those interested in the issues of new technologies in Poland.
EN
In electric vehicle (EV), control strategies play a key role in vehicle dynamic behavior and stability. The traction chain considered in this article consists of a multilevel inverter, an induction machine (IM) and open differential. The proposed control strategy is based on DTC drive. Moreover, In this paper we present, on the one hand, the contribution provided by 5-level flying capacitor inverter with active balancing in DTC control and, on the other hand, the application of the global structure proposed with 7 degrees of fredom (7-DOF) EV model. Computer simulations were performed using the Matlab/Simulink environment to evaluate the performance of the proposed control.
PL
W pojeździe elektrycznym (EV) strategie sterowania odgrywają kluczową rolę w dynamicznym zachowaniu i stabilności pojazdu. Łańcuch trakcyjny rozważany w tym artykule składa się z falownika wielopoziomowego, maszyny indukcyjnej (IM) oraz otwartego mechanizmu różnicowego. Zaproponowana strategia sterowania oparta jest na napędzie DTC. Ponadto w artykule przedstawiono z jednej strony wkład wniesiony przez 5-poziomowy falownik latającego kondensatora z aktywnym równoważeniem w sterowaniu DTC, a z drugiej strony zastosowanie globalnej struktury zaproponowanej z 7 stopniami swobody (7 -DOF) Model EV. Przeprowadzono symulacje komputerowe z wykorzystaniem środowiska Matlab/Simulink w celu oceny działania proponowanego sterowania.
EN
The authors of this manuscript present the development of a braking system with friction material baseWC-Cu coating for the electric vehicle. This manuscript follows on from the original development of an AGV multi-disc braking system and an experimental investigation of the friction factor of WC-Cu coatings. In addition to developing the mechanical elements and construction of the electric vehicle, the tribological parameters of three samples of the steel substrate, the C45 with WC-Cu coating, were investigated in the tribological laboratory. A metallic coating of the WC-Cu base was applied on theC45 steel substrate using electro-spark deposition coating technology. The experiment used three samples with different percentage ratios of chemical elements in the coating structure. The tribometer working on a “Ball on Plate” principle was an investigation of the friction factor of all samples duringthe experiment. Subsequently, the surface of the samples was modified structure WC-Cu with laser technology. The microhardness of modified and unmodified coatings according to the Vickers methodology was investigated in the next stage. At the end of the experimental investigation, a braking simulation was created in the programming environment of the Matlab® software, considering all driving resistances. The researchers also focused on the simulation of heat conduction during braking for some considered driving modes with braking on a level and with a 20% slope roadway. The simulation of heat flow was carried out in the Matlab® programming environment using the Fourier partial differential equation for non-stationary heat conduction.
EN
In the current discussions on the future of the automotive industry, two extreme opinions clash: electromobility or vehicles with conventional drive but powered by alternative fuels. The article discusses the issue related to modeling the energy efficiency factors of a combustion engine operating on three types of fuels (Diesel 100%, Biofuel 100%, and Hemp Oil 100%) as well as an electric drive powered by energy from a coal power plant. Analytical research was conducted based on the external characteristics of the engine's performance. The external characteristic of the Fiat Panda 1.3 JTD combustion engine was obtained on the Automex dynamometer. The engine operated on three fuels: Diesel 100%, Biofuel 100% (rapeseed), and Biofuel 100% (hemp oil). The Nissan Leaf vehicle manufacturer provided the external characteristics of the electric engine. The calculation results showed that the combustion engine consumes less energy at lower speeds than the electric one. At higher speeds, the consumption rates are at a similar level. The recipients of the research are both the demand side – that is, vehicle users, as well as future manufacturers and government institutions responsible for shaping and developing future mobility in the field of individual transport.
PL
W toczących się obecnie dyskusjach na temat przyszłości motoryzacji ścierają się dwie skrajne opinie: elektromobilność lub pojazdy z konwencjonalnym napędem, ale zasilane paliwami alternatywnymi. W artykule omówiono zagadnienie związane z modelowaniem współczynników efektywności energetycznej silnika spalinowego zasilanego trzema rodzajami paliw (olej napędowy 100%, biopaliwo 100% i olej konopny 100%) oraz napędu elektrycznego zasilanego energią z elektrowni węglowej. Badania analityczne przeprowadzono w oparciu o zewnętrzną charakterystykę pracy silnika. Charakterystykę zewnętrzną silnika spalinowego Fiat Panda 1.3 JTD uzyskano na hamowni Automex. Silnik pracował na trzech paliwach: olej napędowy 100%, biopaliwo 100% (rzepak) oraz biopaliwo 100% (olej konopny). Zewnętrzna charakterystyka silnika elektrycznego została dostarczona przez producenta pojazdu Nissan Leaf. Wyniki obliczeń wykazały, że przy niższych prędkościach silnik spalinowy zużywa mniej energii niż silnik elektryczny. Przy wyższych prędkościach wskaźniki zużycia są na podobnym poziomie. Odbiorcami badań jest zarówno strona popytowa - czyli użytkownicy pojazdów, jak i przyszli producenci oraz instytucje rządowe odpowiedzialne za kształtowanie i rozwój przyszłej mobilności w zakresie transportu indywidualnego.
PL
W artykule scharakteryzowano układ zasilania i sterowania podwieszonego ciągnika akumulatorowego CA-190 zasilanego z akumulatora litowego typu VOLTER. Ciągnik akumulatorowy CA-190 z akumulatorem litowym typu VOLTER jest innowacyjną konstrukcją wpisującą się w aktualne tendencje rozwojowe transportu w światowym górnictwie. Własne źródło zasilania eliminuje stosowanie przewodów zasilania elektrycznego bądź hydraulicznego, które ograniczały zasięg stosowania ciągnika. Nowatorskim rozwiązaniem jest sposób ładowania akumulatora w czasie postoju, bezpośrednio z kopalnianej sieci elektroenergetycznej. Stosowanie akumulatorów jako źródła energii ogranicza negatywny wpływ na atmosferę kopalnianą poprzez brak emisji spalin oraz znaczne zmniejszenie generowanego hałasu i ciepła. Wdrożenie ciągników CA-190 przyczynia się do zwiększenia efektywności wykonywanych prac oraz wpływa na poprawę bezpieczeństwa pracy załóg górniczych i ergonomii pracy. W artykule przedstawiono system sterowania ciągnika CA-190 oraz kierunki jego dalszego rozwoju.
EN
The article describes the power supply and control system of the CA-190 suspended battery monorail powered by VOLTER lithium battery. Battery monorail CA-190 powered by VOLTER lithium battery is an innovative construction consistent with current trends in the development of transport in the global mining industry. Its own power source eliminates the need for electric cables or hydraulic hoses that limited the monorail's range. An innovative solution is the method of charging the battery during standstill, directly from the mine's power grid. The use of batteries as an energy source limits the negative impact on the mining environment by not emitting exhaust fumes and significantly reducing noise and heat emission. The use of the CA-190 monorail contributes to increasing the efficiency of the performed works and improves the work safety of the mining crews and ergonomics. The CA-190 control system and the directions of its further development are presented.
PL
Przedmiotem artykułu jest opis budowy i zasady działania oraz prezentacja wyników badań elektromechanicznego zespołu napędowego dedykowanego do napędu pojazdów samochodowych, elektrycznych i hybrydowych. Z uwagi na istotne różnice w charakterystyce pracy pomiędzy silnikiem elektrycznym i spalinowym, podjęto próbę zaprojektowania od podstaw zintegrowanej jednostki napędowej dedykowanej do pojazdów napędzanych silnikami elektrycznymi. Zadaniem zespołu jest przeniesienie napędu z silnika elektrycznego na koła pojazdu w taki sposób, jak dzieje się to w klasycznych pojazdach z napędem spalinowym z wykorzystaniem szeregu podzespołów takich jak: sprzęgło, bezstopniowa skrzynia biegów, mechanizm różnicowy oraz przekładnia główna. Napęd przekazywany jest niezależnie na lewe i prawe koło pojazdu, dzięki czemu uzyskujemy możliwość zadania różnych wartości momentu i prędkości obrotowej na poszczególne koła w zależności od chwilowych wymagań drogowych. Ponadto, własności te, przy wykorzystaniu odpowiedniej nadrzędnej jednostki sterującej, umożliwiają zastosowanie zaawansowanego systemu kontroli trakcji. Przedstawione rozwiązanie dedykowane jest głównie dla pojazdów dostawczych i terenowych o DMC < 3,5 t, wymagających często wysokiego momentu obrotowego przy niskiej prędkości jazdy w długim przedziale czasowym (podjazd pod duże wzniesienie czy poruszanie się w grząskim terenie). Kompaktowa budowa przekładni w połączeniu z obecnie obowiązującą tendencją do budowy silników elektrycznych o dużej gęstości mocy, umożliwia budowę zintegrowanego zespołu złożonego z silników elektrycznych i przekładni o małej masie i gabarytach w stosunku do rozporządzanej mocy. Dodatkowo artykuł zawiera wyniki badań trakcyjnych oraz opis zabudowy prototypowego zespołu napędowego w samochodzie FIAT Ducato III.
EN
The subject of the article is a description of the construction and operating principles, as well as the presentation of the electromechanical drive unit, dedicated to drive electric and hybrid vehicles, research results. Due to the significant differences in the operating characteristics between the electric motor and the internal combustion engine, an attempt to design an integrated drive unit, dedicated to vehicles powered by electric motors, was made from scratch. The drive unit has the task of transferring the drive from the electric motor to the vehicle wheels in the same way as it functions in the classic vehicles with internal combustion engines, using a number of components such as: clutch, continuously variable transmission, differential and the main transmission gear. The drive is transmitted to the left and the right vehicle wheel independently, thus we obtain the possibility of setting the different values of torque and rate of rotation to individual wheels depending on the temporary requirements of road conditions. Moreover, these features, with the appropriate master control unit application, enable the use of an advanced traction control system. The presented solution is dedicated mainly to delivery and off-road vehicles with GVW < 3.5 t, often requiring high torque at low driving speed for a long period of time (driving steeply uphill or in off-road). The compact structure of the transmission gear, combined with the current trend to build electric motors with high power density, enables the construction of an integrated unit consisting of a small weight and dimensions electric motors and transmission gears in relation to the available power. In addition, the article contains the traction tests results and the installation description of a prototype drive unit in a FIAT Ducato III vehicle.
EN
In this paper a programmable steering machine (PSM) and the lightweight electric powered vehicle, designed and made at the Kazimierz Pulaski University of Technology and Humanities in Radom (UTH Radom) have been presented. Both these technical objects are the result of the project carried out by the Student Research Group “Turbodoładowani”. The steering machine has been developed with the programmable algorithms allowing to execute a controllable movement of the vehicle steering wheel. After execution, the system does not need an interaction with the driver. For this reason, a higher repetition of the vehicle traction measurements can be achieved. Such confirmation obtained in tests within which the time waveforms of rotation angle of the steering wheel by a set value of 45, 90, 180 and 360 degrees was recorded. In particular, the accuracy index for mentioned test conditions was calculated. Obtained results, expressed by the average value of the sensitivity index were lower than 2% within the tests carried out for ±45 degree maneuvers. In case of other tests i.e., for ±90, ±180 and ±360 degree maneuvers the accuracy index value was lower than 0.3%. In this way, it was confirmed that the tested PSM reached the appropriate operating parameters necessary for vehicle traction tests.
PL
W artykule przedstawiono programowalną maszynę sterującą (PMS) oraz lekki pojazd o napędzie elektrycznym, zaprojektowane i wykonane na Uniwersytecie Technologiczno-Humanistycznym w Radomiu (UTH Radom). Oba te obiekty techniczne są efektem projektu realizowanego przez Studenckie Koło Naukowe „Turbodoładowani”. Maszynę sterującą opracowano z programowalnymi algorytmami pozwalającymi na wykonanie sterowanego ruchu kierownicą pojazdu. Po wykonaniu system nie wymaga interakcji z kierowcą. Z tego powodu można uzyskać większą powtarzalność pomiarów trakcji pojazdu. Potwierdzenie takie uzyskano w badaniach, w których rejestrowano przebiegi czasowe kąta obrotu kierownicy o zadaną wartość 45,90, 180 i 360 stopni. W szczególności obliczono wskaźnik dokładności dla wspomnianych warunków testowych. Uzyskane wyniki wyrażone średnią wartością wskaźnika czułości były niższe niż 2% w badaniach przeprowadzonych dla manewrów ±45 stopni. W przypadku pozostałych badań tj. dla manewrów ±90, ±180 i±360 stopni wartość wskaźnika celności była mniejsza niż 0,3%. Potwierdzono w ten sposób, że badany PSM osiągnął odpowiednie parametry eksploatacyjne niezbędne do badań trakcji pojazdu.
PL
Zmiany prawne z zakresu OZE – zarówno krajowe, jak i w szczególności unijne – nie zwalniają tempa. Ostatnio sporo mówi się chociażby o unijnym rozporządzeniu w sprawie rozwoju infrastruktury paliw alternatywnych (AFIR), które ma być wiążące od 13 kwietnia przyszłego roku. Wynika z niego między innymi obowiązek przyśpieszenia budowy stacji ładowania pojazdów elektrycznych, tak aby ich liczba odpowiadała liczbie zarejestrowanych pojazdów.
PL
W artykule omówione zostały podstawy bezpieczeństwa pożarowego pojazdów elektrycznych.
EN
The article discusses the basics of fire safety of electric vehicles.
PL
W artykule omówiono perpektywy rozwoju infrastruktury ładowania pojazdów elektrycznych w Polsce do 2030 r.
EN
The article discusses perspectives for the development of electric vehicle charging infrastructure in Poland until 2030.
EN
The three-phase induction motor is well suited for a wide range of mobile drives, specifically for electric vehicle powertrain. During the entire life cycle of the electric motor, some types of failures can occur, with stator winding failure being the most common. The impact of this failure must be considered from the incipient as it can affect the performance of the motor, especially for electrically powered vehicle application. In this paper, the intern turn short circuit of the stator winding was studied using Fast Fourier transform (FFT) and Shor-Time Fourier transform (STFT) approaches. The residuals current between the estimated currents provided by the extended Kalman filter (EKF) and the actual ones are used for fault diagnosis and identification. Through FFT, the residual spectrum is sensitive to faults and gives the extraction of inter-turn short circuit (ITSC) related frequencies in the phase winding. In addition, the FFT is used to obtain information about when and where the ITSC appears in the phase winding. Indeed, the results allow to know the faulty phase, to estimate the fault rate and the fault occurrence frequency as well as their appearance time.
EN
The fleet of electric vehicles is systematically growing. Many passenger car manufacturers are already reporting that after 2030, vehicles equipped with electric propulsion will account for half of the models produced. Vehicles equipped with an electric drive include: battery-powered electric vehicles, hybrid electric vehicles and fuel cell electric vehicles. Over the years, these vehicles have undergone constant change. The aim of this paper was to review trends in the development of pure electric vehicles and plug-in hybrid vehicles.
EN
In electric vehicles, as in hybrids vehicles, a very important factor affecting the energy efficiency of the power-train is the ability to use the regenerative braking energy. Depending on the settings available in electric vehicles, the driver can choose different modes of operation: switch off the regenerative braking mode altogether, select the intensity of regenerative braking, or leave the control system in automatic mode. The last mode is often the only one available on eclectic vehicles, so the driver cannot decide whether to switch off or increase intensity of the regenerative braking. This paper presents a new method for evaluating the energy efficiency of electric vehicle powertrains under urban operating conditions. The presented method uses a procedure for mapping the operating conditions allowing to determine the reference level of energy consumption in relation to those recorded during the identification tests. Identification tests were carried out in the Tri-City area using electric vehicles of different purposes and operating parameters. Performed tests allowed to evaluate the regenerative braking efficiency of tested vehicle, which varies over a relatively wide range, for vehicle A from 33 to 77%, for vehicle B from 27 to 55% and for vehicle C from 36 to 58%. It can be concluded that one of the main factors determining the regenerative braking efficiency is the level of state of charge of the accumulator and the management algorithm used by the vehicle for controlling this parameter.
first rewind previous Strona / 16 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.