Ograniczanie wyników
Czasopisma help
Autorzy help
Lata help
Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 65

Liczba wyników na stronie
first rewind previous Strona / 4 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  physico-mechanical properties
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 4 next fast forward last
PL
Z uwagi na możliwość powstania wysadzin szczególnie niebezpiecznych dla konstrukcji nawierzchni drogowych słabe grunty należy wymienić lub wzmocnić. Jednym z typowych sposobów wzmocnienia podłoża jest stabilizacja gruntów cementem, jednak nie każdy grunt występujący w podłożu jest przydatny do ulepszenia. Najlepszą poprawę parametrów mechanicznych uzyskuje się dla gruntów niespoistych. Stabilizacja występujących wśród gruntów równoziarnistych może nie być skuteczna. W artykule oceniono wpływ cementu portlandzkiego CEM I 42,5 R na wytrzymałość na ściskanie i mrozoodporność równoziarnistych piasków i pospółek oraz przedstawiono zagadnienie zrównoważonego wykorzystania zasobów mineralnych.
EN
Due to the possibility of formation of frost heave, which is particularly dangerous for road surface structures, weak soils should be replaced or strengthened. One of the typical ways is to stabilize the soil with cement, but not every soil present in the subgrade is suitable. The best improvement in mechanical parameters is achieved for non-cohesive soils. Stabilization of even-grained soils occurring among them may not be effective. The article assessed the influence of Portland cement CEM I 42,5 R on the compressive strength and frost resistance of even-grained sands.
PL
Głównym celem pracy jest ocena potencjału materiałów na bazie grzybni jako nowego, ekologicznego materiału do zastosowań w inżynierii lądowej. Temat biokompozytów został podjęty w związku z potrzebą rozwijania technologii przyjaznych środowisku. Grzybnia jest tematem z innej dziedziny – biologii, a jej użycie jako materiału dla budownictwa nie jest jeszcze powszechnie rozpoznane, ale wydaje się, że może stanowić obiecujące rozwiązanie w zakresie materiałów izolacyjnych i lekkich elementów murowych. Materiały na bazie grzybni mają niską gęstość, są biodegradowalne, a ich produkcja jest stosunkowo tania i nie wymaga zużycia dużej ilości energii. Nie dysponujemy jeszcze odpowiednią liczbą badań ani normami, które umożliwiłyby porównywanie wyników, ale dotychczas przeprowadzone testy i artykuły przeglądowe dają podstawy, żeby brać pod uwagę dalszy rozwój tego typu wyrobów. Aby sprawdzić przebieg procesu uzyskiwania grzybni, jej propagacji na podłożu i możliwości kształtowania takiego materiału, zostały wykonane próbki, które poddano badaniom w celu określenia podstawowych właściwości fizykomechanicznych: wytrzymałości na ściskanie, nasiąkliwości oraz reakcji na ogień. Chociaż uzyskane wyniki parametrów wytrzymałościowych dały porównywalne wyniki do niektórych danych literaturowych, a absorpcja wody była zgodna ze spodziewaną, reakcja na ogień różniła się od oczekiwanej. Uzyskane wyniki potwierdzają, że należy kontynuować badania, aby lepiej rozpoznać wpływ czynników, takich jak dobór gatunku grzyba, podłoża i ewentualnych dodatków, a także warunków rozrostu grzybni: temperatury, wilgotności i czasu trwania.
EN
The main objective of the paper is to assess the potential of mycelium-based materials as a new, ecological material for civil engineering applications. The topic of biocomposites was undertaken due to the need to develop environmentally friendly technologies. Mycelium is a topic from a different field – biology, and its use as a construction material is not yet widely recognized, but it seems that it may be a promising solution as insulation and lightweight masonry elements. Mycelium-based materials are biodegradable, have low density, and their production is cheap and does not require large amounts of energy. We do not yet have an adequate number of performed tests or standards that would enable comparison of results, but the research and review articles carried out so far provide grounds for considering further development of this type of products. In order to check the process of obtaining mycelium, its propagation on the substrate and the possibility of shaping such material, samples were made and tested in order to determine the basic physical and mechanical properties: compressive strength, water absorption and reaction to fire were checked. Although the obtained mechanical properties were comparable to some of the reported ones in literature data, and water absorption was predictable, the response to fire was different from expected. The obtained results confirm that the research should be continued to better recognize the influence of factors such as the selection of fungi species, substrate and possible additives, as well as the conditions of mycelium growth: temperature, humidity and duration.
EN
Researchers are constantly looking for the use of new and effective types of natural dyes to reduce the impact of harmful factors from the use of synthetic dyes. In this study, the effects of a natural plant extract based on oak bark, used as a dye during the finishing process, on the physico-mechanical and hygroscopic properties of the leather were studied. Extraction was carried out by the traditional method without chemical additives using only distilled water and oak bark. The application of finishing solutions based on a standard chemical pigment and oak bark extract was carried out using an automatic rotary spray machine in combination with a drying tunnel. The physico-mechanical properties of colored leathers based on oak bark extract were determined in comparison with a standard chemical pigment and with a sample without finishing. The hygroscopicity of the leather samples were also evaluated, such as: water absorption, water penetration and color fastness to water spotting. The results of the conducted studies have shown that the samples stained with a natural dye have good physico-mechanical and water resistance properties.
EN
Bacterial infections pose a serious threat to human health. For many years, there has been a search for materials that would inhibit their development. It was decided to take a closer look at various elastomeric materials with the addition of chitosan. Mixtures based on silicone, silicone with a platinum catalyst, acrylonitrile-butadiene rubber, natural rubber, and ethylene-propylene-diene rubber were developed and tested for antibacterial and physico-mechanical properties. The dispersion of chitosan in the elastomer was also investigated using a scanning electron microscope. Of the tested mixtures, three were selected, characterised by the best antibacterial and physico-mechanical properties and a very good dispersion of chitosan in the matrix. The mixtures were based on silicone, silicone with a platinum catalyst and natural rubber. Tests were performed to measure the release of compounds into water for these mixtures. Furthermore, cytotoxicity with L929 cells and cytocompatibility in direct contact with MG63 cells were investigated for silicone samples. The results showed that these materials were not toxic to mammalian cells and supported their growth. The best bactericidal properties against E. coli and S. aureus strains compared to the other tested materials (>99.0–99.9% of killed bacteria) were shown by samples made of silicone and silicone with a platinum catalyst and added chitosan. At the same time, the best physico-mechanical properties were found for the samples with chitosan based on silicone with added platinum and natural rubber. Developed materials appeared to be good candidates for manufacturing medical equipment on which the adhesion and growth of bacteria should be prevented.
PL
Badaniom poddano restaurowane ściany zewnętrzne ratusza miejskiego, w których wykonana została kompleksowa naprawa tynków na elewacjach. Zastosowano specjalistyczne zaprawy tynkarskie typu renowacyjnego. Po wykonaniu napraw pojawiły się jednak liczne uszkodzenia. Badania miały na celu sprawdzenie właściwości zastosowanych tynków, ustalenie przyczyn uszkodzeń i określenie wytycznych wykonania naprawy. W tym celu pobrano próbki tynków wraz z fragmentami podłoża, aby określić stopień zasolenia murów. Następnie tynki zostały poddane badaniom fizykochemicznym, które wykazały niski stopień zasolenia tynków oraz właściwości odpowiadające odmianie renowacyjnej tynków. Jest to przykład, kiedy przy niskim zasoleniu murów wysokoporowate tynki renowacyjne nie są w pełni wykorzystane i mogą być zastąpione przez tradycyjne systemowe zaprawy tynkarskie odmiany lekkiej o zwiększonej porowatości.
EN
The restored external walls of the town hall were examined, in which comprehensive plaster repairs were made on the facades. Specialist renovation type of render mortars were used. However, after the repairs were made, numerous damages appeared. The tests were aimed at checking the properties of the renders used, determining the causes of damage and specifying repair guidelines. For this purpose, render samples were taken along with fragments of substrates to determine the degree of salinity of the walls. Then the renders were subjected to physical and chemical tests. The tests showed a low degree of render salinity and properties corresponding to the renovation type of renders. The analyzed case is an example when, with low salinity of walls, highly porous renovation plasters are not fully used and can be replaced by traditional system plaster mortars of a light variety with increased porosity.
PL
W artykule przedstawiono wyniki badań laboratoryjnych właściwości fizycznych i mechanicznych (zagęszczalności, ściśliwości, przewodności hydraulicznej oraz wytrzymałości na ścinanie) gruntowych materiałów kompozytowych stanowiących mieszaninę torfu, popiołu lotnego i wapna hydratyzowanego. W świetle uzyskanych wyników, parametry geotechniczne wszystkich kompozytów są porównywalne, co stanowi, że o przydatności materiału może decydować kryterium roboczego przedziału wilgotności.
EN
The paper presents the results of laboratory tests of physical and mechanical properties (compaction, compressibility, hydraulic conductivity, and shear strength) of ground composite materials made of peat, fly ash and hydrated lime. The results showed that the geotechnical parameters of the all composites are comparable. Given to these properties it may be accepted that range of working moisture is most usefulness parameter to assessment of composite as an embankment construction material.
PL
W przyszłości największym wyzwaniem dla energetyki wiatrowej będzie recykling łopat turbin wiatrowych. W artykule przedstawiono wyniki badań właściwości fizycznych i mechanicznych zapraw cementowych modyfikowanych dodatkiem proszków pochodzących z recyklingu mechanicznego łopat turbin wiatrowych wykonanych z kompozytów szklanych. Duży dodatek tych proszków powoduje zmniejszenie wytrzymałości zapraw na ściskanie i zginanie, co jest związane z pogorszeniem urabialności mieszanki, zmniejszeniem gęstości pozornej oraz zwiększeniem porowatości i nasiąkliwości stwardniałych zapraw.
EN
The recycling of wind turbine blades will be the biggest challenge for the wind power industry in the near future. This paper presents the results of a study of the physical and mechanical properties of cementitious mortars modified with the addition of powders from the mechanical recycling of wind turbine blades made from glass composites. Increased powder addition decreases the compressive and flexural strength of mortars, which is associated with a decrease in the workability of the mixture, a decrease in apparent density and an increase in the porosity and absorbability of the hardened mortars.
8
Content available remote Właściwości fizyczno-mechaniczne autoklawizowanych kompozytów geopolimerowych
PL
W artykule przedstawiono wyniki podstawowych badań: wytrzymałości na zginanie i ściskanie; nasiąkliwości wagowej i gęstości objętościowej autoklawizowanych kompozytów geopolimerowych z dodatkiem recyklatu geopolimerowego. Jako zmienne przyjęto: zawartość recyklatu z geopolimerów, stanowiącą część mieszanki popiołowo-żużlowej oraz współczynnik aktywator/spoiwo. Wyniki wskazują, że zastosowanie materiału z recyklingu geopolimerów poprawia badane cechy kompozytów.
EN
The article presents the results of basic tests: bending and compressive strength, water absorption by weight and volumetric density of autoclaved geopolymer composites with the addition of geopolymeric recyclate. A variable content of geopolymer recyclate was assumed as part of the ash-slag mixture and a variable activator/binder ratio. The results indicate that the use of geopolymer recycled material improves the examined properties of composites.
10
Content available remote Wybrane właściwości fizykomechaniczne mieszanek kruszywowo-bentonitowych
PL
Mieszanki kruszywowo-bentonitowe są coraz powszechniej stosowanym rozwiązaniem do stabilizacji oraz uszczelnienia obiektów w inżynierii środowiska i budownictwie, np. składowiska, wały przeciwpowodziowe, zapory ziemne, torowiska drogowe czy kolejowe, a także różnego rodzaju obiekty kubaturowe. W artykule przedstawiono wyniki wybranych badań właściwości fizykomechanicznych mieszanek na bazie wybranego kruszywa i bentonitu. Przeprowadzone badania wykazały, że mieszanki kruszywowo-bentonitowe można uznać za przydatne w budownictwie, m.in. do stabilizacji wykopów.
EN
Aggregate-bentonite mixtures are an increasingly widely used solution for stabilization and sealing of both environmental and construction engineering facilities, e.g. landfills, flood embankments, earth dams, road and railway tracks, as well as various types of cubature structures. The article presents the results of selected studies of the physical and mechanical properties of mixtures developed in various proportions based on aggregate and bentonite. The conducted research has shown that the aggregate-bentonite mixtures in question can be considered useful in construction, e.g. for the stabilization of excavations.
PL
W artykule przedstawiono wyniki badań wybranych cech technicznych kruszywa granitowego i wapiennego oraz betonów konstrukcyjnych z ich zastosowaniem. Do wykonania betonów użyto grysu wapiennego z wyrobiska Wapienno na Kujawach oraz grysu granitowego z kamieniołomu w Strzegomiu. Badania odporności kruszyw na rozdrabnianie wykonano, stosując dwie receptury betonu o identycznym składzie ilościowym. W pierwszej użyto kruszywa wapiennego, a w drugiej granitowego. W przypadku betonu przeprowadzono badania wytrzymałości na ściskanie, nasiąkliwości, głębokości penetracji wody pod ciśnieniem i mrozoodporności. Uzyskane wyniki potwierdziły, że właściwości fizykomechaniczne betonu wykonanego na bazie kruszywa wapiennego są porównywalne do właściwości betonu wykonanego na bazie kruszywa granitowego.
EN
The article presents the results of tests of selected technical features of granite and limestone aggregate as well as construction concretes made with their use. Limestone grit from the deposit in the Piechcin, Barcin and Pakość regions in Kujawy and granite grit from the quarry in Strzegom was used for the tests. The tests were carried out using two concrete recipes with the same quantitative composition. In the first, limestone grit was used, and in the second - granite. The tests of aggregate resistance to grinding were carried out. Compressive strength,water absorption, water penetration depth under pressure and frost resistance were tested for concrete. The obtained test results confirmed that the physical and mechanical properties of concrete made on the basis of limestone aggregate in the performed scope of tests are similar to the properties of concrete made on the basis of granite aggregate.
PL
Od kilku lat na terenie Polski pojawiają się Instalacje Termicznego Przekształcania Odpadów Komunalnych (ITPOK), które w wyniku spalania odpadów produkują żużle. Materiał ten, po odpowiednich badaniach laboratoryjnych, może zostać wykorzystany do produkcji materiałów budowlanych przeznaczonych dla drogownictwa. W artykule wskazano podstawowe badania laboratoryjne oraz nakreślono kierunki wykorzystania kruszywa w warstwach konstrukcji nawierzchni.
XX
For several years, Municipal Waste Incineration Plants have been prepared in Poland, which are producing slags as a result of waste incineration. This material, after appropriate laboratory tests, can be used in the production of building materials for road construction. The article indicates the basic laboratory tests and outlines the directions of aggregate use in the layers of the pavement structure.
EN
This research studies the effects of addition of micro- and nanoparticles of TiO2 and variations in the firing temperature on the physico-mechanical properties of oxide-beryllium ceramics, shows the evolution of the microstructure of such ceramics during sintering, and presents the data of X-ray phase analysis. It was shown that the addition of TiO2 nanoparticles leads to a higher density of the ceramic material after sintering due to the interpenetration of TiO2 and BeO phases, which is caused by an increase in the diffusion mobility of atoms that can in turn be attributed to an increase in the imperfection of the structure and the fraction of grain boundaries. It was found that the presence of nanoparticles contributes to an increase in the apparent density of the material, as well as a decrease in its total and closed porosity; and an increase in the sintering temperature contributes to the transformation of the crystalline structure of TiO2 into a more conductive Ti3O5with an orthorhombic structure. The presence of nanoparticles also promotes self-healing of micropores, which can be explained by the blocking of a certain fraction of the interfaces between BeO particles by nanoparticles and the creation of a diffusion barrier.
EN
The determination of the physico-mechanical characteristics of rocks is very essential for the planning and implementation of engineering structures as well as for the classification of the rock mass. These physico-mechanical properties are often obtained directly in the laboratory by using standard tests on specific core samples and/or cut samples. However, these experiments are difficult to perform, destructive, time-consuming, costly, and are impossible to execute in some cases due to the complex nature of some rocks. Hence, there is a need to develop an indirect approach to estimate these physico-mechanical properties of rocks. The artificial neural network (ANN) technique has been proven to be well suited for developing predictive models for the estimation of the physico-mechanical characteristics of rocks. Therefore, this study presents new ANN models to predict uniaxial compressive strength (UCS), dry unit weight (DUW), Brazilian tensile strength (TS), point load index (Is(50)), porosity (ɸ), and the Schmidt hardness (RN) based on the seismic P-wave velocity (Vp), and to compare the ANN models with conventional empirical models. Three error indexes including determination coefficient (R2 ), average absolute percentage error, and root mean square error were determined to assess the reliability of the newly developed ANN models. The results show that the developed models were able to predict the UCS, DUW, TS, Is(50), ɸ and the RN from the Vp of intact rocks with high accuracy, determination coefficient (R2 ) of more than 0.89 was achieved. The ANN models also showed better performance compared to the conventional empirical models.
PL
Na przełomie lat sześćdziesiątych i siedemdziesiątych ubiegłego wieku rozpoczęto systematyczne badania naukowe wpływu różnego typu domieszek na zmianę właściwości reologicznych asfaltu. Spośród wielu opracowanych wtedy metod modyfikacji asfaltu do dzisiaj zachowała się pamięć o dwóch: modyfikacja przy użyciu mączek mineralnych lub siarki. Modyfikacja asfaltu poprzez zmieszanie go z mączką mineralną skutkuje wyraźnym wzrostem jego lepkości i niewielkim trwałości zależnym od ilości użytej mączki oraz od jej składu mineralogicznego i granulometrycznego. Wprowadzenie dodatku siarki daje natomiast możliwość korzystnej modyfikacji takich własności reologicznych asfaltu jak podatność na zmiany temperatury oraz lepkości. Zdaniem autora artykułu warto się przyjrzeć, jak długą i krętą drogę przeszły sposoby modyfikacji asfaltu, zanim osiągnęły dzisiejszy poziom.
EN
At the end of the 1960s, scientists initiated a systematic research on the influence of various types of admixtures on rheological properties of asphalt. Among the many asphalt modification methods developed at that time, two of them are still remembered today: modification with the use of mineral meal or of sulphur. Modification of asphalt by mixing it with mineral meal results in a significant increase in its viscosity and slight increase in durability, depending on the amount of meal used as well as its mineralogical and granulometric composition. On the other hand, the addition of sulphur enables beneficial modification of asphalt rheological properties such as susceptibility to changes in temperature and viscosity. According to the author of the article, it is worth examining how long and winding was the road for asphalt modification methods before they reached the present level.
PL
W artykule zaprezentowano podstawowe informacje na temat procesów korozji budowli oraz wykorzystania systemów polimocznikowych jako funkcjonalnej metody zabezpieczenia konstrukcji przed korozją. Opisano podstawowe zalety i wady tego rodzaju izolacji, ze szczególnym uwzględnieniem właściwości antykorozyjnych oraz zaprezentowano jej pozytywny wpływ na charakterystyki wytrzymałościowe elementów konstrukcyjnych.
EN
The article presents basic information on building corrosion processes and the use of polyurea systems as a functional method of protecting structures against corrosion. The basic advantages and disadvantages of this type of insulation are described, with particular use as an anti-corrosion coating and a positive effect on the strength parameters of structural elements.
PL
W artykule poruszono problem zagospodarowania zalegających na terenie Pomorza piasków, powstających jako odpad poprodukcyjny w procesie hydroklasyfikacji. Jednym ze sposobów na jego rozwiązanie jest zastosowanie kruszywa odpadowego do wytwarzania konstrukcyjnych kompozytów ze zbrojeniem rozproszonym. Autorzy zaprezentowali wyniki badań wybranych właściwości kompozytów drobnokruszywowych o różnej zawartości włókien stalowych. Przeprowadzone badania pozwoliły dobrać taką ilość włókien, przy której fibrokompozyt wykazuje najlepsze właściwości i spełnia wymagania stawiane materiałom konstrukcyjnym. Stwarza to możliwość wykorzystania zalegających hałd piasku odpadowego, rozwiązując tym samym częściowo problem kosztownej rekultywacji terenów wyrobisk kopalnianych.
EN
In the paper a problem of waste sand deposits located in Polish Pomerania region was raised. These deposits an excavation by-product were obtained during the process called aggregate hydroclassification. One of the examples how to resolve this problem is application of waste sand for the production of steel fibre reinforced composites. The authors introduced their tests results based on selected properties of fine aggregate composites containing different fibre volume fractions. The research tests conducted on these type of composites have allowed to choose such a fibre volume fraction, at which fibre composite exhibits the best properties and meets the requirements of construction materials. The results of the research tests could create a good opportunity for the use of the waste sand and could partially solve the problem of expensive reclamation of former mine areas.
EN
In rice husk removal processes, the rubber rollers are used to produce white rice kernels. Paddies are fed between two rubber rollers and the removal of husk takes place due to high friction generated between the paddy layer and outer surface of rubber rollers. Husk removal application involves rubber compounds with promising physico-mechanical properties. Small scale rice mills in Tamil Nadu, India face problems in periodic replacement of rubber rollers due to poor service life. Based on thesurvey, it was found that the rubber compounds with high hardness lead to efficient husk removal and at the same time cause break age of rice. Employing soft rubber eliminates the breakage of rice, but on the other hand the sharp corners of paddy damage the rubber. This research work focuses on the development of rubber compounds for effective rice husk removal application. Carbon black filled, pure and blends of natural rubber (NR), acrylonitrile butadiene rubber (NBR), and epoxidized natural rubber (ENR) are developed. Mechanical properties and lab scale rice husk separation studies are conducted for the developed rubber compounds. The ENR-NBR blends prove to be suitable materials for husk removal application.
PL
Usunięcie łusek z ziaren ryżu metodą walcowania pomiędzy rolkami wykonanymi z kauczuku napełnionego sadzą następuje w wyniku tarcia wytwarzanego między warstwą nasion ryżu a powierzchnią rolek. Do tego typu zastosowań potrzebne są mieszanki kauczukowe o specjalnych właściwościach fizyko-mechanicznych. Ze względu na niewielką trwałość dotychczas stosowanych materiałów gumowych, małe młyny ryżu w Tamil Nadu w Indiach borykają się z koniecznością okresowej ich wymiany. Na podstawie przeprowadzonych badań stwierdzono, że rolki wykonane z mieszanek kauczukowych o dużej twardości skutecznie usuwają łuski, ale niestety powodują jednocześnie pękanie ziaren ryżu. Z kolei zastosowanie mieszanek kauczukowych o mniejszej twardości ogranicza zjawisko pękania, ale ostre łuski uszkadzają rolki. Zbadano właściwości mechaniczne i efektywność w procesie separacji łuski ryżowej napełnionych sadzą wulkanizatów kauczuku naturalnego (NR), butadienowo-akrylonitrylowego (NBR), epoksydowanego kauczuku naturalnego (ENR) lub ich mieszanin. Wulkanizaty mieszaniny ENR-NBR okazały się najbardziej odpowiednimi materiałami na rolki do zastosowań w procesie usuwania łuski ryżowej.
EN
The currently applicable legal provisions and also the economic concepts emphasize the importance of circular economy. In this aspect, it is very important to reduce the waste production respectively planning and running a business. Technical research is the key to finding a new applications for waste, in particular disposed on landfilling. Mining and energy industries belong to the biggest producers of waste in Poland. The total share of these two branches in waste production is up to 70% (mining and quarrying 53%; electricity, gas, steam and air conditioning supplay 17%). In environment, economy and social aspect, it is very important to develop this waste. The paper presents research on the physico-mechanical properties of the aggregates based on colliery shale supplemented by fly ash (20% - 40% supplement of fly ash). The following tests should be mentioned among performed: particle size distribution, the sand equivalent test, freeze resistance and direct shear tests. Also the chemical properties found in the literature was invoked. The research shows good physico-mechanical properties of the mixes, such as cohesion (44.62 kPa - 68.57 kPa) or internal firiction angle (34.74° - 40.52°). Though low resistance to weathering and a large susceptibility to frost heave (the mass loss after the freezing cycles is 76%) may limit its applicatin in road engineering. The sand equivalent tests were made only for aggregates. Tested materials shows usefulness for earthen structures. However, the research should be supplemented by chemical tests and also observations of the material properties changes as the effect of time. The research on the leachability of chemical pollutants, which will determine the acceptable share of ash in the mix, could be especially significant. The fact that fly ash contains a lot of sulphates and chlorides, which leach into the environment may pose a threat to living organisms.
PL
Aktualne przepisy prawa oraz koncepcje gospodarcze obowiązujące w Polsce kładą duży nacisk na gospodarkę o obiegu zamkniętym. W tym aspekcie bardzo ważne staje się ograniczanie liczby odpadów odpowiednio planując oraz prowadząc działalność gospodarczą. Dlatego, poprzez badania poszukuje się rozwiązań, które pozwoliłyby na znalezienie nowych zastosowań dla odpadów, w szczególności unieszkodliwianych poprzez składowanie. Energetyka i górnictwo to dwie gałęzie przemysłu, których udział w produkcji odpadów jest największy. W Polsce oba sektory wytwarzają łącznie około 70% odpadów (górnictwo 53%; energetyka 17%). Zagospodarowanie tych odpadów jest bardzo ważne w aspekcie środowiskowym, ekonomicznym jak i społecznym.W artykule przedstawiono badania właściwości fizyko-mechanicznych dla mieszanek kruszywowo-popiołowych bazujących na łupku przywęglowym oraz popiele lotnym (20%-40% dodatku popiołu lotnego). Pośród przeprowadzonych badań należy wymienić: badanie wskaźnika piaskowego, badanie składu ziarnowego, badania mrozoodporności czy test bezpośredniego ścinania. Przywołano także właściwości chemiczne popiołów lotnych, które znaleziono w literaturze. Przeprowadzone badania wskazują na dobre właściwości fizyko-mechaniczne mieszanek kruszywowo-popiołowych takie jak kąt tarcia wewnętrznego (34.74°-40.52°) i spójność (44.62 kPa-68.57 kPa). Jednak niska mrozoodporność łupku przywęglowego (utrata masy po cyklach mrożenia wynosi 76%) wprowadza pewne ograniczenia co do możliwości zastosowania niniejszego materiału, w szczególności np. w drogownictwie. Badania wskaźnika piaskowego wykonano jedynie dla kruszyw, nie uwzględniając mieszanek. Badany materiał wykazuje potencjał do zastosowania przy wznoszeniu budowli ziemnych. Należy jednak przedstawione badania uzupełnić o badania chemiczne, a także uwzględnić w nich zmianę właściwości materiału pod wpływem czasu. Szczególnie ważne mogą okazać się badania wymywalności zanieczyszczeń chemicznych, które określą dopuszczalny udział popiołu w mieszance. Jest to związane z tym, że popioły lotne zawierają dużo siarczanów i chlorków, które wymywane do środowiska mogą stanowić zagrożenie dla organizmów żywych.
first rewind previous Strona / 4 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.