Ograniczanie wyników
Czasopisma help
Autorzy help
Lata help
Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 41

Liczba wyników na stronie
first rewind previous Strona / 3 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  economic evaluation
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 3 next fast forward last
EN
Energy storage is an increasingly vital aspect of the energy sector in Poland due to the growing prevalence of renewable energy sources. Its primary goal is to support the uptake of renewable energy in the country’s energy mix. The article presented here analyzes the economic potential of buying and selling electricity on the Intra-Day Market and the Day-Ahead Market of Towarowa Giełda Energii SA (Polish Energy Market: TGE) in terms of energy storage. In four scenarios, energy was either bought and sold on the DAM/IDM or bought on one market and sold on the other to identify the most favorable case. Two four-month periods in 2021 and 2023 were examined. An analysis was carried out on a lithium-ion storage facility that has a two-hour charging cycle for energy storage. A methodology was proposed to identify the two highest and two lowest energy prices for imposing constraints on the purchase and sale times. The time of day when these prices occurred was also analyzed. The annual and periodic profits that can be obtained by purchasing and selling stored energy were calculated. The calculations and analyses facilitated inter-market comparison. Energy storage payback time was computed, and investment profitability was examined. The final section presents conclusions, opportunities, and suggestions for further research in this area.
PL
Magazynowanie energii jest coraz ważniejszym aspektem sektora energetycznego w Polsce ze względu na rosnącą popularność odnawialnych źródeł energii. Jego jednym z głównych celów jest wspieranie wykorzystania energii odnawialnej w miksie energetycznym kraju. W prezentowanym artykule dokonano analizy potencjału ekonomicznego zakupu i sprzedaży energii elektrycznej na Rynku Dnia Bieżącego i Rynku Dnia Następnego Towarowej Giełdy Energii SA (Polski Rynek Energii: TGE) w zakresie magazynowania energii. W czterech scenariuszach energię kupowano i sprzedawano na RDN/IDM lub kupowano na jednym rynku i sprzedawano na drugim, aby określić najkorzystniejszy przypadek. Badano dwa czteromiesięczne okresy w latach 2021 i 2023. Przeprowadzono analizę magazynu litowo-jonowego, który posiada dwugodzinny cykl ładowania w celu magazynowania energii. Zaproponowano metodologię identyfikacji dwóch najwyższych i dwóch najniższych cen energii w celu nałożenia ograniczeń na czas zakupu i sprzedaży. Analizie poddano także porę dnia, w której te ceny występowały. Obliczono roczne i okresowe zyski, które można uzyskać z zakupu i sprzedaży zmagazynowanej energii. Przeprowadzone obliczenia i analizy umożliwiły porównania międzyrynkowe. Obliczono czas zwrotu magazynowania energii oraz zbadano opłacalność inwestycji. W ostatniej części przedstawiono wnioski oraz możliwości i sugestie dalszych badań w tym obszarze. Jak obliczono, najbardziej opłacalnym przypadkiem po uwzględnieniu efektywności ekonomicznej był zakup na RDN i sprzedaż na RDN w części 2023 roku: 18 751,61 [EUR/MWh mocy]. Dla porównania, najwyższą wartość za rok 2021 uzyskano w przypadku sprzedaży i zakupu na IDM, z zyskiem na poziomie 7531,23 [EUR/MWh mocy].
EN
A system optimization method was used, which consists in the consistent justification of optimal technological and constructive solutions and parameters of drainage polder systems during the development of their projects. This is done in compliance with modern economic and environmental requirements according to criteria and models for different levels of management decision-making over time (project, planned operation). Based on the performed relevant predictive and optimization calculations for the conditions of the real object, the following three tasks have been accomplished. (1) The optimal pump module at the stage of operation for the existing polder drainage system has been substantiated. (2) The design of the pumping unit and the parameters of its components during the reconstruction of the polder drainage system have been improved. This made it possible to reduce the load on the pumping equipment, the duration of its operation, and the cost of electricity by 20–40%, depending on the water level of the year. The improvement was carried out by the diversion of the corresponding part of the surface runoff with additionally introduced gravity elements in the form of a puncture in the body of the protective dam and a siphon intake. (3) We have substantiated the optimal water regulation technology for the existing polder drainage system in modern and forecast weather and climate conditions, which will ensure the maintenance of the necessary water-air regime of the drained soils in different phases of the growing season of agricultural crops. This will make it possible, on demand, to increase the energy and general environmental and economic efficiency during their creation and functioning of the polder drainage system in accordance with modern changing conditions.
EN
A technological quality method was used to compare two methods of sodium tripolyphosphate (STPP) production. The first method was the classic spray method (CM) and the second was a dry single-stage method (DSM). The assessment criteria were environmental, based on Life Cycle Assessment (LCA) evaluation and economic, based on production costs. The technological quality assessment of CM was 6.5% lower in comparison to DSM. LCA environmental analyses showed that the partial environmental quality of DSM was lower by only 4.4% compared to CM. Partial economic quality was lower by 10.3%, mainly due to the lower energy costs (on average 52%) for DSM. The advantage of the new DSM method is the technological progress achieved, mainly due to the application of new technology, design, and apparatus solutions; thus, the basic elements of the activities proposed in the methodology allow for cleaner STPP production.
EN
Hydrogen as a raw material finds its main use and application on the Polish market in the chemical industry. Its potential applications for the production of energy in fuel cell systems or as a fuel for automobiles are widely analyzed and commented upon ever more frequently. At present, hydrogen is produced worldwide mainly from natural gas, using the SMR technology or via the electrolysis of water. Countries with high levels of coal resources are exceptional in that respect, as there the production of hydrogen is increasingly based on gasification processes. China is such an example. There some 68% of hydrogen is generated from coal. The paper discusses the economic efficiency of hydrogen production technologies employing lignite gasification, comparing it with steam reforming of natural gas technology (SMR). In present Polish conditions, this technology seems to be the most probable alternative for natural gas substitution. For the purpose of evaluating the economic efficiency, a model has been developed, in which a sensitivity analysis has been carried out. An example of the technological process of energy-chemical processing of lignite has been presented, based on the gasification process rooted in disperse systems, characteristics of the fuel has been discussed, as well as carbon dioxide emission issues. Subsequently, the assumed methodology of economic assessment has been described in detail, together with its key assumptions. Successively, based on the method of discounted cash flows, the unit of hydrogen generation has been determined, which was followed by a detailed sensitivity analysis, taking the main risk factors connected with lignite/coal and natural gas price relations, as well as the price of carbon credits (allowances for emission of CO2) into account.
PL
Wodór jako surowiec ma głównie zastosowanie na rynku Polskim w przemyśle chemicznym, jednak coraz częściej są szeroko analizowane i komentowane jego perspektywiczne zastosowania do produkcji energii w układach ogniw paliwowych czy jako paliwa samochodowego. W chwili obecnej na świecie wodór wytwarzany jest głównie z gazu ziemnego przy wykorzystaniu technologii reformingu parowego lub na drodze elektrolizy wody. Wyjątkiem są kraje dysponujące dużymi zasobami węgla, gdzie jego produkcja jest coraz częściej oparta na procesach zgazowania. Takim przykładem są Chiny, gdzie około 68% wodoru wytwarzane jest z węgla. Artykuł porusza tematykę oceny efektywności ekonomicznej technologii produkcji wodoru na drodze zgazowania węgla brunatnego odnosząc ją do technologii reformingu parowego gazu ziemnego (SMR). Aktualnie, w warunkach polskich technologia ta wydaje się być najbardziej prawdopodobną alternatywą substytucji gazu ziemnego. Na potrzeby oceny efektywności ekonomicznej zbudowano model, w którym przeprowadzono analizę wrażliwości, w szczególności zaprezentowano przykładowy proces technologiczny energo-chemicznego przetwarzania węgla brunatnego, bazujący na procesie zgazowania na podstawie układu dyspersyjnego, omówiono charakterystykę paliwa oraz kwestię emisji ditlenku węgla. Następnie szczegółowo opisano przyjętą metodykę oceny ekonomicznej oraz jej kluczowe założenia. Kolejno, bazując na metodzie zdyskontowanych przepływów pieniężnych, wyznaczono jednostkowy koszt wytworzenia wodoru, po czym dokonano szczegółowej analizy wrażliwości, uwzględniając główne czynniki ryzyka, związane z relacją cen węgla i gazu ziemnego oraz ceną pozwoleń na emisje CO2.
EN
The article assesses the profitability of investment in low-power CHP systems in an agricultural holding. This assessment pertains to three CHP units, it is units powered by a Stirling engine, equipped with a microturbine, and powered by a piston internal combustion engine. The assessment is based on the assumption that all electric power and heat generated will be used by the agricultural holding for its own purposes. For comparison, the results of calculations, including the depreciation of investment in the CHP system, were compared with the costs of purchasing electric power and heat from external providers.
PL
W artykule przedstawiono ocenę opłacalności inwestycji w układy CHP małych mocy w gospodarstwie rolnym. Ocenie tej poddano trzy agregaty kogeneracyjne, tj. agregaty z silnikiem Stirlinga, z mikroturbiną oraz z tłokowym silnikiem spalinowym. Do oceny przyjęto założenie, że cała wytwarzana energia elektryczna i ciepło wykorzystywane będą na potrzeby własne gospodarstwa. Dla porównania wyniki obliczeń, w tym czas amortyzacji inwestycji w układ kogeneracyjny, zestawiono z kosztami zakupu energii elektrycznej i ciepła z zewnątrz
PL
W publikacji przeanalizowano efektywność ekonomiczną eksploatacji węgla połączoną z lokowaniem skały płonnej w zrobach likwidowanych ścian. Analizy przeprowadzono dla wybranego rejonu złoża perspektywicznego w kopalni X. Skalkulowano nakłady związane z zakupem kompleksów ścianowych przystosowanych do lokowania skały płonnej w zrobach likwidowanych ścian oraz pozostałe nakłady dotyczące dostosowania istniejącej infrastruktury kopalni X do wydobycia niezagospodarowanych odpadów. Podstawę obliczeń technicznych stanowiły oszacowanie bilansu skały płonnej oraz wielkości możliwego wydobycia, biorąc pod uwagę osiadania powierzchni terenu oraz poziom wypełnienia zrobów. Bazując na metodzie NPV i IRR, wykazano negatywną efektywność ekonomiczną przedsięwzięcia, czego przyczynami były głównie spowolnienie postępu ścian i obniżenie tempa wydobycia.
EN
The publication presents the valuation of economic efficiency of coal extraction combined with the backfilling of liquidated longwalls. The analyses were carried out for a selected prospective deposit in the mine X. The capital expenditures of the longwall system adopted to allocate waste rock were also estimated, as well as other necessary outlays in the mine X. The basis for technical calculations was the estimation of the gangue balance and the limit of the coal extraction, taking into account the surface subsidence and the advance of backfilling. Finally, based on the NPV and IRR method, the negative economic effectiveness of the project was demonstrated, which was mainly caused by limiting the extraction and production rate.
EN
Considering limited capabilities of obtaining energy in a traditional way from coal combustion and the requirements of the European Union, other alternative Energy sources should be sought. They have been increasingly used by business entities and individual investors and are designed to provide financial profits, which will be ensured only with correct operation of the energy system. One of the examples of alternative energy sources application is the construction of small hydropower plants, where the efficiency of all elements included is of great importance. Article analyses of financial losses incurred by owners of power plants when the energy system lacks 100% capacity of the inlet channel. Material that accumulates on SHP trash racks might be analysed in two ways: biologically (these are screenings – as in wastewater treatment plants) and hydraulically.
PL
W artykule przedstawiono ocenę ekonomiczną kosztów i strat funkcjonowania sieci zrobów górniczych. Wyniki badań uzyskano poprzez porównanie zrobów konserwacyjnych w kopalni „Pavlogradugol” oraz na przykładzie analizy dwóch kopalń – „im. Bohaterów Kosmosu” i „Zachodni Donbas”.
EN
In order to study the social component of man-made damage in the national economy, an expert model for establishing levels of technogenic morbidity of the population of Ukraine, due to the destructive influence factors (emissions, discharges, waste), have been built by means of fuzzy logic in this paper. The economic evaluation and prediction of the social component of man-made losses – cost of treating patients with tumors due to environmental pollution have been conducted. In the national economy these results should be considered in the formation of public expences on health care and the treatment of patients. This will increase the effectiveness of state regulation of the phenomenon, provide appropriate allocations for their eradication and compensation.
10
EN
The research has revealed the entity of investment activity and defined its characteristics. The way of investment attraction mechanisms economic evaluation has been offered within the investigation. The notions of an enterprise investment attraction have been characterized. The way of the level of an enterprise investment attraction has been provided. On the basis of the process of investment attraction level of an enterprise-recipient an economic evaluation of investment attraction has been fulfilled.
PL
W artykule przedstawiono wyniki pracy, której celem było ustalenie ekonomicznej zasadności stosowania oraz wpływu na żywotność drzew dwóch metod wykonania instalacji podziemnych: wykopów otwartych i przecisków sterowanych. Porównano koszt zastosowania tych metod w przypadku budowy podziemnej kanalizacji sanitarnej w miejscowości Rybno. Wykazano, że realizacja inwestycji metodą tradycyjnych wykopów otwartych obniża wartość drzew. Nie zauważono takiego wpływu w przypadku metody horyzontalnych przewiertów sterowanych. Porównanie symulacji kosztów inwestycji i kosztów pośrednich (dodatkowo towarzyszących danej metodzie) wykazało, że rzeczywisty, rynkowy koszt realizacji metodą bezwykopową (horyzontalnych przewiertów sterowanych) jest o 62 – 68% mniejszy niż metodą wykopów otwartych.
EN
In this paper are presented the results of research in which was compared the economical justification of the traditional methods of excavation and horizontal directional drilling, concerning the value of trees. The evaluation was performed by comparing the costs of engineering infrastructure construction of the two methods in one construction site. It was demonstrated that, when compared to the cost of investment and indirect costs (also accompanying themethod), the actual cost of the excavation method (horizontal directional drilling) is lower about 62 – 68% than the cost of the excavation method. It was also found that the implementation of the investment by traditional open excavation reduces the value of trees. The application of the method of horizontal directional drilling to minimize the negative impact of construction works on the value of trees.
12
Content available remote Economic evaluation of product innovation in the wood industry - a case study
EN
The aim of this article is to present the economic analysis focused on the economic evaluation of the product innovation preceding production extension by the new products. The assessment of profitability was conducted on the basis of a specific example.
EN
Frequent gridlocks and traffic jams during the periods of rush hours can result in long user delays and more vehicle emissions causing continuous degradation of air quality. The builtinfrastructure of densely populated cities and intercity travel by passenger and freight traffic lead to significant adverse impacts of traffic congestion on air quality, greenhouse gas emissions, and global warming. Transportation contributes 28% of energy related greenhouse gas emissions in the U.S. This paper shows that traffic related carbon dioxide (CO2) emissions are higher per capita for several rural and smaller cities compared to large urban areas in the United States. Inadequate use of mass transit, urban sprawl, construction of more roads and traditional stop-controlled intersections, and addition of more lanes to increase traffic capacity and ease congestion, are primary causes of significant vehicle emission inventory of CO2 and air quality degradation. It is shown that sustainable traffic management policies, such as reduction of work-related travel by cars and more use of mass transit modes, can decrease CO2 emissions. Case studies of value engineering applications are presented to select cost-effective less polluting mass transport strategies based on economic evaluation of life cycle costs and benefits.
EN
The exploitation of minerals from fields of exploitation can be treated as a separate investment project. Three stages of such a project should be considered during the decision-making process, the preparation of a field for exploitation, the acquisition of raw materials and the liquidation of the field following mining activities. During the implementation of these various stages, the evaluation of the economic efficiency of static and dynamic methods are taken into account in each of the stages. An essential element is also the evaluation of risks connected with the investment, this is a quantitative measure of the uncertainty of achieving specific objectives. The bases for the correct calculation of economic efficiency include: proper input data, including economic and technological aspects. This article highlights the necessity of an economic evaluation concerning the exploitation of fields during operational periods due to their recognition in higher categories and the ever changing mining and economic conditions. Such changes are analysed with economic efficiency of exploitation systems. The initial value of the project takes into consideration the time value of money proposed as a criterion of economic evaluation. Income and expenditure, which correspond to the liquidity of the company, are assumed as a basis for calculation. Net present value is presented as a sum of values regarding preparation period, exploitation and field liquidation.
PL
Wydobywanie kopalin z pól eksploatacyjnych można traktować jako odrębny projekt inwestycyjny. W procesie podejmowania decyzji należy uwzględniać trzy etapy takiego projektu, obejmujące przygotowanie pola do eksploatacji, pozyskanie surowca oraz likwidację pola po zakończeniu działalności górniczej. W procedurze realizacji poszczególnych etapów w każdym z nich uwzględnia się ocenę efektywności ekonomicznej, z zastosowaniem metod statycznych i dynamicznych. Ważnym elementem jest również ocena ryzyka związanego z prowadzeniem inwestycji, będącego ilościową miarą niepewności osiągnięcia zamierzonych celów. Podstawą poprawnie wykonanego rachunku efektywności są odpowiednie dane wejściowe, obejmujące aspekty ekonomiczne i technologiczne. W artykule wskazano na celowość dokonywania oceny ekonomicznej eksploatacji pól w okresie operacyjnym ze względu na ich rozpoznanie w wyższych kategoriach oraz ewentualną zmianę warunków górniczych i ekonomicznych. Stosownie do takich zmian analizuje się ekonomiczną efektywność systemów eksploatacji. Jako kryterium oceny ekonomicznej zaproponowano wartość początkową projektu, uwzględniającą wartość pieniądza w czasie, a za podstawę obliczeń przyjęto wpływy i wydatki, które korespondują z płynnością finansową przedsiębiorstwa. Wartość bieżącą netto przedstawiono jako sumę wartości z okresów przygotowania, eksploatacji i likwidacji pola.
PL
Kryteriami przemysłowości określamy warunki geologiczno-górnicze, techniczno-technologiczne, jakościowe i ekonomiczne, jakim powinny odpowiadać kopaliny oraz ich złoża, aby zasoby tych złóż nadawały się do opłacalnej eksploatacji. Kryteria przemysłowości mogą mieć charakter opisowy lub parametryczny. Wynikają one z obecnego stanu techniki i technologii, bądź też są one opisane zmiennymi objaśniającymi w funkcjach, zazwyczaj ekonomicznych, wyrażających opłacalność eksploatacji. Dobór rodzajów kryteriów uwarunkowany jest sposobem eksploatacji - podziemnym lub odkrywkowym oraz rodzajem kopaliny który z kolei determinuje czy o wartości złoża decyduje ilość zawartych w niej składników użytecznych czy jedynie własności fizyko-mechaniczne kopaliny. Kryteria przemysłowości określają granice złoża w profilu pionowym i planie poziomym. Kolejno ustala się kryteria brzeżne, kryteria dla pół eksploatacyjnych i kryteria dla obszarów górniczych z funkcji równości przychodów z kosztami, zerowego zysku operacyjnego i zerowych przepływów pieniężnych netto (NPV=0). Kryteria przemysłowości służą do opracowania Projektu Zagospodarowania Złoża i stanowią załącznik do wniosków koncesyjnych o użytkowanie złóż. W okresie eksploatacji złoża kryteria przemysłowości mogą być korygowane w szczególności do zmiany cen i kosztów wydobycia kopalin.
EN
The industrial criteria are the geological and mining, technical and technological, quality as well as economic conditions which should perform the minerals and their deposits to mine their reserves remuneratively. Industrial criteria may be of the descriptive or parametric character. They get out of state-of-the-art in technique and technology or are described by interpreting variables in functions, usually economic, expressing the profitability of mining operations. The selection of criteria type depends on extraction method (open pit or underground) and the kind of mineral what in turn determines if the deposit value is related with the usable elements content or with physical and mechanical parameters of mineral. The industrial criteria define the boundaries of orebody in the vertical and horizontal direction. The boundary criteria, criteria for mining fields and mining areas are determined successively from the function of equality of income with costs, zero operating profit and zero net cash flow(NPV=0). The industrial criteria are used to prepare the Deposit Development Plan and are the part of application for mining concessions. During the deposit extraction the industrial criteria may be verified especially when the prices or mining costs change.
16
Content available remote Wykorzystanie odnawialnych źródeł energii na przykładzie biogazowni
PL
W publikacji przedstawiono możliwości wykorzystania gazu wysypiskowego do produkcji energii. Uzyskane wyniki analiz wskazują na możliwość zaangażowania w wykorzystanie instalacji biogazowni. Pod bieżącą kontrolą parametrów procesu, instalacja biogazowi jest bezpieczna i minimalizuje niepożądane oddziaływanie składowiska odpadów na środowisko. Parametry pozyskiwanego biogazu decydują o możliwości wykorzystania go do celów energetycznych, a z kolei uzyskana ilość energii elektrycznej i cieplnej decyduje o opłacalności stosowania instalacji odgazowywania składowisk odpadów.
EN
The paper presents the possibility of use of landfill gas for energy production. The results showed that the biogas energy systems have a great potential. Biogas plant in which the parameters of the process are under current control is safe for environment and minimizes adverse impacts of landfill site. The parameters of biogas sourced determine the possibility of using it for energy purposes and in turn obtained the amount of electricity and heat determines the profitability of using installation of degassing landfills for energy generation.
EN
The article presents the general description of the waste energy recovery systems in the marine Diesel power plants. Both, the simple as well as the complex recovery systems have been discussed. The substantial part of the article concerns the overview of the evaluation methods of the recovery systems arrangements. There have been presented the rudiments of the thermodynamic evaluation which in the effect provides the material for the determination of the energetic and exergetic efficiency of the recovery systems. The significant issue is also the description of the method of the arrangements economic evaluation, including the method of the determination of the annual profit ensuing from the operation of the waste energy recovery system and the dynamic methods of the economic analysis with the particular emphasis on the investment outlay payback period index. There have been presented the examples of the dependence of the waste heat turbo-generators on the main engine power output, the estimated payback times of the investment outlays incurred in connection with the discussed systems and the payback time of the outlays with reference to the main engine power output in the function of its power output.
EN
In the case of dispersed power generation, such as renewable energy sources (RES), the investment risks are much higher than for fossil fuels. Higher are also the specific investment costs per MWel of installed power capacity. Therefore, the pre-investment phase for such projects should be elaborated with due diligence. In particular it refers to emerging market technologies, where there has been little or no record of their development in the past. Despite various support schemes, a professional feasibility study is not to be afforded by smaller investors. Therefore, other simplified tools must be made available for them, especially in the pre-investment phase. In this article agricultural biogas plants (ABP) were chosen to exemplify the complexity of the technoeconomic evaluation of dispersed generation in the pre-feasibility phase.
PL
Powszechnie akceptowaną i preferowaną techniką oceny ekonomicznej inwestycji realizowanych w energetyce jest analiza DCF. Metoda ta nie jest jednak najlepszą techniką oceny przedsięwzięć o dużym zakresie ryzyka - głównie z uwagi na brak uwzględniania elastyczności decyzyjnej. Wycenę elastyczności umożliwiają zaawansowane metody oceny ekonomicznej - drzew decyzyjnych oraz opcji rzeczowych (ROA). Oba podejścia wykorzystują system węzłów decyzyjnych, umożliwiając strukturyzację w sposób hierarchiczny problemu decyzyjnego poprzez określenie wszystkich realnych alternatyw działania. Artykuł, dostrzegając elementy wspólne, zwraca uwagę na przewagę analizy ROA związaną z odejściem od stałej stopy RADR i zastosowanie w algorytmie wyceny stopy wolnej od ryzyka, która jest niezależna od struktury ryzyka projektowego.
EN
Commonly accepted and preferred methodology of economic evaluation of energy projects is discounted cash flow analysis (DCF). Though, for the reason of ignoring managerial flexibility, this approach is not the most suitable evaluation technique for high-risk ventures. The pricing of flexibility enable advanced methods of economic evaluation such us decision tree analysis (DTA) and real options valuation (ROV or ROA). Both approaches use decision nodes for hierarchical structurization of decision problem taking into account all real operation alternatives. The paper, perceiving common features of both approaches, emphasizes advantages of the ROV analysis which are mainly connected with avoiding of constant RADR problem and applying, in return, the risk-free rate which is independent of project risk structure.
20
Content available remote Ocena ekonomiczna zastosowania silników energooszczędnych
PL
W artykule przedstawiono metodę oceny ekonomicznej elektrycznych układów napędowych. Sformułowano kryteria oceny. Podano przykłady zastąpienia silnika standardowego silnikiem wysokiej sprawności. Wyliczono uzyskane efekty ekonomiczne. Zwrócono uwagę, że taką analizę trzeba uzupełnić sprawdzeniem własności dynamicznych (rozruchowych).
EN
The paper presents a method of economic evaluation of electrical motors. Assessment criteria are formulated. Examples of replacing the standard motors with the high efficiency substitutes are given. The economic effects of this replacement are calculated. Attention is drawn to the fact, that such an evaluation must be supplemented by checking the dynamic (start up) properties of the motors.
first rewind previous Strona / 3 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.