Skuteczne odprowadzanie wód opadowych z dachu płaskiego jest niezbędne dla jego prawidłowego i bezpiecznego funkcjonowania. Wymaga starannego dobrania systemu odwodnienia i jego parametrów.
The ponding on an inflated membrane tube is studied. Membrane tubes have the advantage of zero leakage and ease of transportation and set-up. A novel related problem is the membrane trough which can be used to contain water and does not need anchoring. These problems depend on two non-dimensional parameters which characterize membrane tension and pressure. Perturbation solutions to second order are found for shallow ponding, and compare well with those of exact numerical integration. Tables for the pertinent parameters are constructed and cross section geometries are found. This research illustrates the interaction of membrane structure, pressure load, and hydrostatics.
W artykule dokonano analizy tranzytywności niecek obniżeniowych na podstawie wyników pomiarów prowadzonych na modelu górotworu - ośrodku sypkim. Wyniki przeprowadzonych analiz wskazują na brak liniowego odwzorowania między nieckami na poszczególnych horyzontach.
EN
The analyses of subsidence trough transitivity on the basis of measurements results taken from rock mass model made of sand have been presented in the paper. The results of researches and analyses show that linear dependence between mining subsidence on particular horizons inside modeled rock mass is not preserved.
4
Dostęp do pełnego tekstu na zewnętrznej witrynie WWW
Geological structure of the Tatra Mts is a result of long-lasting processes. The key nappes have already been completed some 65 Ma ago. However as a mountain range the Tatras has emerged at the surface only 5 Ma ago, when a piece of continental crust separated from African continent at the beginning of Mesozoic era ultimately collided with Europe. Thus, the crystalline core of the Tatras, which builts also the highest crest is a fragment of Africa. This monumental mountains are, however, not an effect of the overthrusting but they resulted from young, vertical tectonic movements, which are still active and which sometimes shake the whole Podhale region. The following paper explains how the Tatras were formed. The figures enclosed illustrate the succeeding formation stages of the mountain range and the photographs allow the Reader to compare drawings with the field. Welcome to the Tatras.
PL
Struktura geologiczna Tatr formowała się bardzo długo, a kluczowe dla niej płaszczowiny były już gotowe przed 65 milionami lat. Pomimo tego jako góry Tatry zaczęły się wyraźnie zaznaczać na powierzchni dopiero 5 mln lat temu. Trzeba było aby kawał skorupy kontynentalnej, oderwany od Afryki z początkiem ery Mezozoicznej, ostatecznie wbił się w kontynent Europejski. Jego fragmentem, okruchem Afryki, jest trzon krystaliczny tworzący m. in. Tatry Wysokie. Ich imponujący wygląd nie jest wszakże efektem ruchów nasuwczych a młodych przesunięć pionowych, które do dziś czasami trzęsą Podhalem. Jak to się stało opisuje poniższy artykuł. Zamieszczone w nim rysunki ilustrują kolejne stadia rozwoju Tatr. Liczne zdjęcia pozwalają porównać papierowe konstrukcje z rzeczywistymi dziełami natury. Zapraszam do lektury i wycieczki w Tatry. Autor.
Przedstawiono wpływ działalności górnictwa podziemnego i tworzących się poeksploatacyjnych niecek osiadania na warunki krążenia wód powierzchniowych i podziemnych. Zmiany stosunków wodnych w obszarach górniczych, gdzie wody powierzchniowe i gruntowe są odizolowane od wyrobisk górniczych warstwami nieprzepuszczalnymi, zaznaczają się przede wszystkim powstawaniem terenów podtopionych w wyniku zmiany spływu wód oraz zmniejszenia głębokości zalegania wód gruntowych. Oceniono zmiany ukształtowania powierzchni terenu i związane z nimi przekształcenia stosunków wodnych w zlewni rzeki Bierawki, która poddana jest intensywnym wpływom robót górniczych. Określono sposoby ochrony terenów górniczych przed zalewiskami wraz z profilaktyką przeciwpowodziową.
EN
The paper presents an influence of underground coal-mining activity and forming post-exploitation subsidence trough on surface and underground water circulation conditions. Changes of water conditions in coal-mining areas, where surface and underground water are isolated from mining headings by the water-proof layers, are evident first of all by forming the partly flooded grounds as a result of water flow change and decrease of depth ground water occurrence. Changes of topography connected with water conditions transformations in Bierawka's river basin, which is under the influence of coalmining activity, were estimated. Methods of coal-mining grounds protection against pools and anti-flood prophylaxis were determined.
W artykule przedstawiono sposób opisu deformacji terenu (na przykładzie obniżeń) dla stanów nieustalonych przy zastosowaniu warunku brzegowego w postaci funkcji liniowej opisującej przemieszczenie stropu do przestrzeni wybranej pod wpływem eksploatacji górniczej. Dokonano również porównania praktycznych (uzyskanych na podstawie pomiarów) i teoretycznych (obliczonych programem komputerowym) kształtów niecek obniżeniowych.
EN
The paper presents the deformation method of groung deformation (basing on the subsidance data) for nonstationary states, withe the application of boundary condition in the form of inear function describing the displacement of roof to the excavated area in effect of mining works. It compares also the practical (obtained from the measurements) and theoretical (calculated with a computer program) shapes of subsidence troughs.
7
Dostęp do pełnego tekstu na zewnętrznej witrynie WWW
Results of laboratory tests on the effect of rotational speed, load volume, angle of the working edge of the trough and percentage composition of a separated mixture on the distribution of fractions in the trough are presented.Mixture was separated on a working element in the shape of a truncated cone narrower or broader at the outlet.
PL
Przedstawiono wyniki doświadczeń laboratoryjnych wpływu prędkosci obrotowej, wartości obciążenia, kąta ustawienia krawędzi roboczej rynienki i procentowego składu rozdzielanej mieszaniny na rozkład frakcji w rynience.Mieszaninę rozdzielano na elemencie roboczym w postaci stożka ściętego zwężającego się i rozszerzającego w kierunku wylotu.
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.