Ograniczanie wyników
Czasopisma help
Autorzy help
Lata help
Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 616

Liczba wyników na stronie
first rewind previous Strona / 31 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  węgiel brunatny
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 31 next fast forward last
EN
The purpose of this paper is to conduct a theoretical and experimental study of lignite drying to determine the effect of drying on the moisture content of lignite. Based on the experimental study, the theoretical model of coal drying, regarding mass exchange, i.e., moisture loss in the initial stage of drying, was verified. The following results were obtained: a mathematical model of drying was proposed and experimentally verified by conducting evaporation measurements of water droplets and coal particles. A parametric analysis of the effect of drying air temperature and drying air velocity on moisture evaporation was carried out using Frossling's equation. It was demonstrated that a reduction in evaporation time within a certain range of low temperatures is achieved by increasing the air velocity. At higher temperatures, the drying air temperature has a greater effect on the evaporation rate of water from coal. The results are presented in the form of an easy-to-read graph, showing isolines of the constant flux of evaporated water as a function of drying air velocity and temperature. A very simple linear model of water evaporation (drying kinetics) is proposed by author (equation 18), which can be used to analyze the kinetics of water evaporation under constant conditions of air temperature and air velocity. The model can be easily parameterized experimentally for any type of coal.
PL
Celem niniejszego artykułu jest przeprowadzenie teoretycznych i eksperymentalnych badań suszenia węgla brunatnego W celu określenia wpływu suszenia na zawartość wilgoci W węglu brunatnym. Na podstawie badań eksperymentalnych zweryfikowano teoretyczny model suszenia wegla W odniesieniu do wymiany masy, tj. utraty wilgoci W początkowej fazie suszenia. Uzyskano następuj ące wyniki: zaproponowano matematyczny model suszenia i zweryfikowano go doświadczalnie poprzez przeprowadzenie pomiarów parowania kropelek wody i cząstek węgla. Przeprowadzono analize parametryczną wpływu temperatury powietrza suszącego i prędkości powietrza suszącego na odparowanie wilgoci przy użyciu równania Frosslinga. Wykazano, że skrócenie czasu parowania W pewnym zakresie niskich temperatur uzyskuje się poprzez zwiększenie prędkości powietrza. W wyższych temperaturach temperatura powietrza suszącego ma większy wpływ na szybkość parowania wody z węgla. Wyniki przedstawiono w formie czytelnego wykresu, pokazuj ącego izolinie stałego strumienia odparowanej wody W funkcji prędkości i temperatury powietrza suszącego. Zaproponowano autorski prosty liniowy model parowania wody (kinetyki suszenia węgla) — równanie (18), który można wykorzystać do analizy kinetyki parowania wody w stałych warunkach temperatury i prędkości powietrza. Model ten można łatwo sparametryzować eksperymentalnie dla dowolnego rodzaju węgla.
2
PL
Przedstawiono wyniki brykietowania mieszanek komunalnych osadów ściekowych o wilgotności 7,75% i węgla brunatnego ze złoża Bełcha tów-pole Szczerców o wilgotności 53,3%. Udział komunalnych osadów ściekowych w mieszankach wynosił 66,67-94,12% s.m. Materiał scala no w prasie walcowej wyposażonej w pierścienie o niesymetrycznym układzie zagęszczania. Określono najkorzystniejszy, z punktu widzenia wytrzymałości mechanicznej brykietów, skład mieszanki oraz zakres wilgotności.
EN
Mixts. of municipal sewage sludge with a moisture content of 7.75% and lignite from the Bełchatów-pole Szczerców deposit with a mois ture content of 53.3% were briquetted in a roller press equipped with an asymmetrical layout system. The share of municipal sewage sludge in the mixts. was 66.67-94.12% d.m. The most favorable mixt. compn. and humidity range were detd. in terms of the mech. strength of the briquettes.
EN
The results of a cost-effectiveness and economic efficiency assessment of the Hydraulic Borehole Mining (HBM) technology applied to lignite mining are presented. The Dynamic Generation Cost, the Net Present Value, and the Internal Rate of Return were calculated for the extraction of lignite at a rate of about 3.44 million Mg/year from a mining parcel of 1 x2.5 km, taking into account CAPEX and OPEX. The cost of mining 1 Mg of lignite using the HBM technology was reported to be lower than its market prices before the energy crisis in Europe caused by the war in Ukraine. The values of the NPV and IRR confirm that the HBM technology may be economically effective in lignite mining. The greatest influence on the cost-effectiveness of the HBM technology was caused by the price of backfill and the diameter of the mining cavern. The NPV is affected by changes in lignite prices. The capital expenditures required by the HBM technology have the least impact on the results in contrary to the open-pit mining technology. Lignite mining using the HBM technology is possible at a level similar to the current level of mining by open-pit technology in Polish conditions.
PL
W wyniku wieloletnich badań i doświadczeń produkcyjnych zrealizowano w Polsce i na świecie szereg kierunków utylizacji surowców (odpadów) z energetyki. Technologie utylizacji były opracowane w zasadzie dla odpadów powstających przy tradycyjnym spalaniu węgla w kotłach pyłowych. Do wytwarzania ABK stosowane są głównie popioły lotne krzemionkowe i/lub popioły fluidalne. Dotychczas popioły lotne wapienne, czyli popioły z dużą zawartością związków wapna powstające podczas spalania węgli brunatnych, a także w procesach suchego odsiarczania spalin w paleniskach konwencjonalnych nie były stosowane do wytwarzania ABK. Popiół lotny pochodzący ze spalania węgla brunatnego w klasycznym palenisku pyłowym charakteryzuje się złożonym składem mineralnym. Dominuje piasek kwarcowy, ale również anhydryt, tlenek magnezu i zwiększone ilości węglanu i tlenku wapnia w stosunku do tradycyjnych popiołów krzemionkowych. Skład ten może być powodem powstawania niekontrolowanych zmian objętości zachodzących podczas hydratacji. Zastosowanie popiołu lotnego wapiennego w technologii ABK daje korzyści ekonomiczne, ekologiczne i techniczne. Związane to jest ze zmniejszeniem ilości wapna w recepturze wyjściowej ABK (w porównaniu do receptury na tradycyjnym popiele krzemionkowym) i wynikającą z tego redukcją emisji CO2. W artykule przedstawiono wyniki badań prób technologicznych zastosowania popiołów wapiennych z Elektrowni Bełchatów. Zweryfikowano możliwość zastosowania ich jako surowiec do wytwarzania autoklawizowanego betonu komórkowego.
EN
As a result of many years of research and production experience, a number of directions for the utilisation of raw materials (waste) from the power industry have been realised in Poland and worldwide. Utilisation technologies were basically developed for wastes arising from traditional coal combustion in pulverised coal boilers. Silica fly ash and/or fluidised bed fly ash are mainly used to produce AAC. Lime fly ash with a high content of lime compounds generated during the combustion of lignite coals and in dry flue gas desulphurisation processes in conventional furnaces, has not been used to produce AAC. Fly ash from the combustion of lignite in a classic pulverised coal furnace is characterised by a complex mineral composition. Quartz sand predominates, but also anhydrite, magnesium oxide and increased amounts of carbonate and calcium oxide compared to traditional silica ash. This composition may be the reason for uncontrolled volume changes occurring during hydration. The use of lime fly ash in AAC technology offers economic, environmental and technical advantages. This is related to the reduction in the amount of lime in the AAC formulation (compared to the formulation on traditional silica ash) and the resulting reduction in CO2 emissions. The article presents the results of technological tests on the use of limestone ashes from the Bełchatów Power Plant in autoclaved aerated concrete technology. The possibility of using them as a raw material for the production of AAC was verified.
PL
Rok 2022 był pod względem zabezpieczenia energii dla polskiej gospodarki i gospodarstw domowych rokiem wyjątkowo trudnym. To rok stojący pod znakiem napaści rosyjskiej na Ukrainę. W wyniku sankcji podjętych przez państwa przeciwne działaniom rosyjskiego agresora, do Europy trafia mniej surowców energetycznych z Rosji. Deficyt gazu wymusił na wielu europejskich krajach weryfikację dotychczasowych strategii. Rok poprzedni – 2021, również był dla energetyków rokiem nietypowym, był to czas zwiększonego zapotrzebowania na surowce energetyczne, jaki nastąpił po pandemii Covid -19. W rozdziale na tle dostępnych danych z lat 2021 i 2022, podjąłem się próby zdiagnozowania głównych problemów i wyzwań jakie stoją przed polską energetyką. Dane o produkcji prądu z 10 miesięcy 2022 r. wskazują, że polski system energetyczny jak dotąd dobrze radzi sobie z wyzwaniami związanymi z deficytem i wysoką ceną gazu ziemnego. Produkcja prądu z krajowych źródeł po raz pierwszy od 7 lat przekracza wewnętrzną konsumpcję. Ustawicznie rośnie również udział mocy opartych na odnawialnych źródłach energii, co jednak nie przekłada się na równie dynamiczny przyrost produkcji z tych źródeł. Deficyty energetyczne wynikające z braku gazu albo wysokiej jego ceny kompensowane są głównie przez branżę węgla brunatnego, co będzie miało konsekwencje we wcześniejszym, niż to wynika z koncesji, wyczerpywaniu zasobów tego surowca. Uważam, że dla zapewnienia bezpieczeństwa surowcowego kraju w przeciągu najbliższych kilkunastu lat konieczna jest bezzwłoczna realizacja programu energetyki jądrowej. Czasu pozostało bardzo mało a dotychczasowe działania niestety nie dają gwarancji powodzenia ambitnych planów budowy pierwszych trzech elektrowni jądrowych. Dlatego w obliczu kończących się zasobów w udostępnionych złożach węgla brunatnego niebezpodstawne jest ponowne otwarcie dyskusji nad budową nowej kopalni odkrywkowej dla przedłużenia funkcjonowania elektrowni Bełchatów poza obecny horyzont wyznaczony przez obowiązującą koncesję i zasoby złoża.
EN
The current year 2022 is an exceptionally difficult year in terms of energy security for the Polish economy and households. This is a year marked by Russian aggression against Ukraine. As a result of the sanctions taken by countries opposing the actions of the Russian aggressor, Europe receives less energy resources from Russia. The gas deficit has forced many European countries to review their current strategies. The previous year (2021) was also an unusual year for energy specialists, it was a time of increased demand for energy resources that followed the Covid -19 pandemic. In the chapter, against the background of available data from 2021 and 2022, I attempted to diagnose the main problems and challenges facing power engineering. Data on electricity production for 10 months of 2022 indicate that the Polish energy system has been coping well with the challenges related to the deficit and high price of natural gas so far. The production of electricity from domestic sources exceeds internal consumption for the first time in 7 years. The share of capacity based on renewable energy sources is also constantly growing, which, however, does not translate into an equally dynamic increase in production from these sources. Energy deficits resulting from the lack of gas or its high price are mainly compensated by the lignite industry, which will result in the depletion of resources of this raw material earlier than stipulated in the concession. I believe that in order to ensure the security of the country’s raw materials over the next several years, it is necessary to implement the nuclear energy program without delay. There is very little time left and, unfortunately, the actions taken so far do not guarantee the success of the ambitious plans to build the first three nuclear power plants. Therefore, in the face of the depleting resources in the opened lignite deposits, it is not groundless to re -open the discussion on the construction of a new open-pit mine in order to extend the operation of the Bełchatów power plant beyond the current horizon set by the current concession and resources of the deposit.
PL
W pracy przedstawiono wyniki obliczeń wpływu odzysku ciepła jawnego i utajonego spalin wylotowych z kotła energetycznego bloku o mocy 900 MW zasilanego węglem brunatnym na pracę instalacji mokrego odsiarczania spalin (IOS). Obliczenia przeprowadzono na podstawie modelu matematycznego wykorzystującego dane z prawdziwej rośliny. Oprócz pozytywnego wpływu układu odzysku ciepła (HRS) na sprawność cieplną bloku energetycznego oraz wstępnego oczyszczenia spalin z pyłów i gazów kwaśnych, wyniki obliczeń wykazały bardzo istotny wpływ na pracę bloku energetycznego. IOS. Główna zmiana dotyczy masowego przepływu wody stosowanej w absorberze w celu schłodzenia spalin do wymaganej temperatury. Obliczony maksymalny spadek zapotrzebowania elektrowni na wodę uzupełniającą (przy 167,5 MW odzysku ciepła) wynosi 185,9 Mg/h. Gdy do uzupełniania używany jest kondensat HRS, zapotrzebowanie na wodę surową będzie zerowe. Dodatkowo HRS w wyniku kondensacji części pary wodnej zawartej w spalinach powoduje częściowe zasiarczenie spalin w wymienniku HRS. Zmniejsza to obciążenie IOS, w tym mniejsze zapotrzebowanie na sorbent i wodę technologiczną używaną do przygotowania roztworu sorbentu. Strumień spalin kierowany do instalacji i odprowadzany do atmosfery przez chłodnię kominową zmniejsza się o ok. 9%. Wartością dodaną proponowanego rozwiązania jest zabezpieczenie wnętrza pochłaniaczy IOS przed wysoką temperaturą spalin w przypadku awarii zasilania instalacji (blackoutu) lub innej tego typu awarii, odcinającej dopływ prądu do pomp IMOS.
EN
This paper presents the results of calculations of the influence of sensible and latent heat recovery from flue gas of a 900 MW power unit Bieled with lignite on the operation of the wet flue gas desulfurization plant (FGD) The calculations based on the mathematical model using data from the real plant. In addition to the positive Impact of the heat recovery system (HRS) on the thermal efficiency of the power unit and the initial cleaning of flue gas from dust and acid gases, the results of the calculations showed a very significant impact on the operation of the FGD. The main change concerns the water mass flow used in the absorber to cool the flue gas to the required temperature. The calculated maximum decrease in the demand for make-up water by the plant (with 167.5 MW of hęatgrecovery) is 185.9 Mg/hr. When HRS condensate is used for top-up, the raw water requirement will be zero. In addition, the HRS with condensation of part of the water vapor contained in the flue gas causes partial flue gas dęsulfurization in the HRS exchanger. This reduces the load on the FGD, including the lower need of sorbent and process water used to prepare the sorbent solution. The flue gas stream directed to the installation and discharged to the atmosphere through the cooling tower is reduced by approx. 9%. The added value of the proposed solution IS thc protection of the interior of the FGD absorbers against high flue gas temperature in the event of a system power failure (blackout) or other such failure, cutting off the power supply to FGD pumps.
EN
The extraction of minerals, including fossil fuels, is a licensed activity. In the case of strategic fossil fuels owned by the state, such as hard coal, lignite, crude oil, natural gas, a license is issued by the minister responsible for the environment. The minister also signs a mining lease agreement, that is the right to use a mining area, with the entity to which they grant the licence. In the case of resources that are not covered by mining lease, but are subject to land property ownership, such as rock or peat, the licensing authority is the staroste or voivodship governor (depending on the area of the deposit or the volume of the mineral to be extracted). The licensing procedure requires the preparation and completion of extensive documentation presenting the interested entity and the activity it is going to undertake. In the case of licences granted by the minister or governor, the submitted documentation is required to contain a de-posit development plan. The licensing procedure consists in examining the license application along with the attached documentation by the competent authority, as well as conducting ar-rangements with the interested institutions and supervisory authorities. Commencement of the licensing procedure for the extraction of coal or peat is not limited in time, whereas the granting of licences for the exploration, identification and extraction of hydrocarbon deposits begins only in the form of a time-limited tender. After the licence has been granted, the area covered by its provisions is entered in the register of mining areas. Licences are granted for a specified period of time. An important element to be included in their contents is indication of the requirements for conducting a business in a way that minimizes the negative impact on the environment.
PL
Eksploatacji węgla brunatnego w Zakładzie Górniczym KWB „Bełchatów” towarzyszy występowanie kopalin towarzyszących. Na obszarze objętym eksploatacją węgla brunatnego, występują kopaliny towarzyszące takie jak: piaski, iły, kreda jeziorna, głazy narzutowe, bruki, pospółki krzemienne oraz wapienie i margle. W 2012 r. powstał pomysł wykorzystania części wapieni z Oddziału KWB Bełchatów do Instalacji Odsiarczania Spalin (IOS) w Elektrowni Bełchatów. W ramach prowadzonych od 2012 r. prac, zostało wykonanych szereg prac rozpoznawczych, projektowych, laboratoryjnych oraz przygotowawczych do eksploatacji. Analizie poddano możliwe rejony pozyskania wapienia w Zakładzie Górniczym KWB „Bełchatów” (Pole Bełchatów oraz Pole Szczerców - rejon 1 i rejon 2).
EN
Turkey has 19.3 billion tons of lignite reserves and the vast majority of these Neogene lignite deposits are preferred for use in thermal power plants due to their low calorific value. The calorific value of lignite used in thermal power plants for electricity generation must be kept under constant control. In the control of calorific value, the estimation of the lower and higher heating values (LHV and HHV) of lignite is of great importance. In the literature, there are many studies that establish a relationship between the heating values of coal and proximate and ultimate analysis variables. In the studies dealing with proximate analysis data, it is observed that although the coefficients of the obtained multiple linear regression models (MRM) are statistically insignificant, these models are used to predict heating values because of the meaningful correlation coefficient. In this study, it is investigated whether moderator variables are effective on LHV estimation with proximate analysis data collected from forty-one lignite basins in different regions of Turkey, and a moderator variable analysis (MVA) model is developed to be used for the prediction of LHV. As a result of the study, it is found that the proposed MVA model is in accordance with observation values (coefficient of determination R2 = 0.951), and absolute and standard errors are also small. Therefore, it is concluded that the use of MVA to estimate the LHV of Turkey’s lignite is found to be more statistically meaningful.
PL
Turcja posiada 19,3 mld ton zasobów węgla brunatnego, a zdecydowana większość tych neogeńskich złóż węgla brunatnego jest preferowana do wykorzystania w elektrowniach cieplnych ze względu na ich niską wartość opałową. Wartość opałowa węgla brunatnego wykorzystywanego w elektrowniach ciepłowniczych do produkcji energii elektrycznej musi być stale kontrolowana. W procesie kontroli wartości opałowej bardzo ważne jest oszacowanie wartości opałowej i ciepła spalania węgla brunatnego. W literaturze istnieje wiele badań, które ustalają związek między wartościami opałowymi węgla a zmiennymi analizy przybliżonej (technicznej) i końcowej. W badaniach dotyczących danych analizy technicznej zaobserwowano, że chociaż współczynniki uzyskanych modeli wielokrotnej regresji liniowej (MRM) są statystycznie nieistotne, modele te są wykorzystywane do przewidywania wartości opałowych ze względu na znaczący współczynnik korelacji. W niniejszym artykule zbadano, czy zmienne moderatora są skuteczne w szacowaniu wartości opałowej (LHV) na podstawie danych z analizy technicznej zebranych z czterdziestu jeden zagłębi węgla brunatnego w różnych regionach Turcji, a także opracowano model analizy zmiennych moderatora (MVA), który ma być wykorzystywany do przewidywania LHV. W wyniku badań stwierdzono, że proponowany model MVA jest zgodny z wartościami obserwacji (współczynnik determinacji R2 = 0,951), a błędy bezwzględne i standardowe są również niewielkie. W związku z tym stwierdzono, że wykorzystanie MVA do oszacowania LHV tureckiego węgla brunatnego jest statystycznie uzasadnione.
EN
In-situ thermal upgrading modification technology is of great significance to lignite utilisation cleanly. It is an extremely complex multi-field coupling process. Therefore, it is necessary to study the physical properties of lignite under the thermo-mechanical coupling function. In this paper, the lignite pore evolution characteristics under thermal-mechanical co-function have been obtained at different scales based on experimental results. The mechanisms also have been deeply studied. The results indicated that lignite total porosity first increased and then decreased as the temperature increased from 23°C to 400°C under the triaxial stress of 7 MPa. The maximum value of 21.64% for the total porosity of lignite was observed at 200°C. Macropores were dominant when the temperature was lower than 100°C, while visible pores were dominant when at temperatures ranging from 100~400°C. The thermal weight loss and deformation characteristics of lignite were further studied using a thermal-mechanical testing platform. The weight loss and deformation process could be divided into three stages, namely the slow, rapid, and relatively slow stages. After being continuously pyrolysed for 5 hours at a temperature of 400°C, the maximum weight loss rate of lignite was 52.38%, the maximum axial linear strain was 11.12%, and the maximum irrecoverable radial strain was 18.79%. The maximum axial thermal deformation coefficient of lignite was −2.63×10 −4℃ −1 at a temperature of 289°C. Macro-deformation and component loss were the main mechanisms of lignite structure evolution.
EN
The aim of the study was to assess the possibility of using natural carbonaceous materials such as peat, lignite, and hard coal as low-cost sorbents for the removal of Direct Orange 26 azo dye from an aqueous solution. The adsorption kinetics and the influence of experimental conditions were investigated. The following materials were used in the research: azo dye Direct Orange 26, Spill-Sorb “Fison” peat (Alberta, Canada), lignite (Bełchatów, Poland), and hard coal (“Zofiówka” mine, Poland). The morphology and porous structure of the absorbents were tested. Dye sorption was carried out under static conditions, with different doses of sorbents, pH of the solution, and ionic strength. It was observed that the adsorption of Direct Orange 26 dye on all three adsorbents was strongly dependent on the pH of the solution, while the ionic strength of the solution did not affect the adsorption efficiency. The adsorption kinetics were consistent with the pseudo-second-order reaction model. The stage which determines the rate of adsorption is the diffusion of the dye in the near-surface layer. The process of equilibrium adsorption of Direct Orange 26 dye on all tested adsorbents is best described by the Langmuir isotherm. The maximum adsorption capacity for peat, brown coal and hard coal was 17.7, 15.1 and 13.8 mg/g, respectively. The results indicate that peat, lignite, and hard coal can be considered as alternative adsorbents for removing azo dyes from aqueous solutions.
PL
Celem pracy była ocena możliwości wykorzystania naturalnych materiałów węglowych takich jak torf, węgiel brunatny i węgiel kamienny jako niskokosztowych sorbentów do w usuwaniu barwnika azowego Direct Orange 26 z roztworu wodnego. Zbadano kinetykę adsorpcji oraz wpływ dawki sorbentu, pH roztworu oraz siły jonowej na skuteczność sorpcji. W badaniach wykorzystano barwnik azowy Direct Orange 26, torf Spill-Sorb „Fison” (Alberta, Kanada), węgiel brunatny (Bełchatów,Polska) oraz węgiel kamienny („Zofiówka”, Polska). Wykonano badania morfologii oraz struktury porowatej absorbentów. Sorpcję barwnika prowadzono w warunkach statycznych, przy różnych dawkach sorbentów, pH roztworu i sile jonowej. Zaobserwowano, że adsorpcja barwnika Direct Orange 26 na wszystkich trzech adsorbentach była silnie zależna od pH roztworu, natomiast siła jonowa roztworu nie wpływała na efektywność adsorpcji. Kinetyka adsorpcji była zgodna z modelem reakcji pseudo-drugiego rzędu. Etapem decydującym o szybkości adsorpcji jest dyfuzja barwnika w warstwie przypowierzchniowej. Proces adsorpcji równowagowej barwnika Direct Orange 26 na wszystkich badanych adsorbentach najlepiej opisuje izoterma Langmuira. Maksymalne zdolności adsorpcyjne dla torfu, węgla brunatnego i węgla kamiennego wynosiły odpowiednio 17,7, 15,1 i 13,8 mg/g. Wyniki wskazują, że torf, węgiel brunatny i węgiel kamienny mogą być rozważane jako alternatywne adsorbenty do usuwania barwników azowych z roztworów wodnych.
12
Content available Węgiel brunatny w Polsce a religia Zielonego Ładu
PL
Scharakteryzowano aktualny stan energetyki opartej na węglu brunatnym w Polsce na tle produkcji energii w wybranych państwach UE i niektórych państwach świata. Przedstawiono plany rozwoju energetyki węglowej w państwach azjatyckich i w konsekwencji wzrost globalnej emisji CO2 do atmosfery co najmniej do 2035 r. Z przedstawionych danych wynika, że na tle działania oraz deklarowanych planów państw emitujących najwięcej CO2 do atmosfery polityka europejska zmierzająca do osiągnięcia tzw. zeroemisyjności nie przynosi globalnych skutków. Postawiono tezę, że obecna polityka UE w sferze walki ze zmianami klimatycznymi ukierunkowana na działania regionalne nie jest skuteczna, a wręcz prowadzi do zwiększenia globalnej emisji CO2 do atmosfery. Wskazano na niskie tempo rozwoju energetyki opartej na odnawialnych źródłach energii (OZE) w Polsce. Naturalne (pogodowe, dobowe) ograniczenia produkcji prądu ze źródeł odnawialnych sprawiają, że przy obecnym stanie rozwoju technicznego nie można wyłącznie na tych źródłach oprzeć bezpieczeństwa energetycznego kraju. Zwrócono uwagę na nowe w polskiej energetyce zjawisko – rosnący deficyt energii, który kompensowany jest importem. Postawiono pytanie, czy wobec stanu polskiej energetyki oraz rosnącego zapotrzebowania na prąd należy ograniczać produkcję energii z rodzimych źródeł, w tym z paliw kopalnych, tak jak to wynika z założeń Zielonego Ładu. W konkluzji stwierdzono, że produkcja energii w istniejących ośrodkach górniczo-energetycznych opartych na węglu brunatnym powinna być utrzymana przynajmniej do czasu wyeksploatowania udostępnionych złóż. Dwie dekady pozostałe do zakończenia eksploatacji złóż węgla brunatnego w polskich kopalniach odkrywkowych to niewiele czasu dla przeprowadzenia gruntownych i systemowych zmian. Bez obecnie funkcjonujących elektrowni opartych na węglu brunatnym oraz bez intensywnych działań, mających na celu zwiększenie dynamiki rozwoju alternatywnych źródeł energii, Polska już wkrótce stanie wobec dramatycznego problemu narastającego deficytu energii elektrycznej.
EN
The current state of lignite-based energy in Poland was characterized against the background of energy production in selected EU countries and some countries of the world. The plans for the development of coal-based energy in Asian countries were presented and, as a consequence, the increase in global CO2 emissions into the atmosphere at least until 2035. The presented data show that against the background of the actions and the declared plans of the countries emitting the most CO2 into the atmosphere, the European policy aimed at achieving the so-called being zeroemission does not have a global impact. A thesis has been put forward that the current EU policy in the field of combating climate change aimed at regional actions is not effective, and even leads to an increase in global CO2 emissions to the atmosphere. The low pace of development of energy based on renewable energy sources in Poland was indicated. Due to the natural (weather, daily) limitations of electricity production from renewable sources, with the current state of technological development, the country’s energy security cannot be based solely on these sources. Attention was paid to a new phenomenon in the Polish energy sector – the growing energy deficit, which is compensated by imports. The question was asked whether, in view of the condition of the Polish energy sector and the growing demand for electricity, the production of energy from domestic sources, including fossil fuels, should be limited, as it results from the assumptions of the Green Deal. The conclusion was that the production of energy in the existing mining and energy centers based on lignite should be maintained at least until the available deposits are exhausted. The two decades remaining until the end of the exploitation of lignite deposits in Polish opencast mines is not much time for thorough and systemic changes. Without the currently operating lignite-based power plants and without intensive actions aimed at increasing the dynamics of the development of alternative energy sources, Poland will soon face the dramatic problem of the growing electricity deficit.
PL
Polityka energetyczna państwa stanowi kierunek rozwoju sektora energetyczno-paliwowego, a także wpływa na kwestię jakości powietrza, rozwoju elektromobilności, działań z zakresu efektywności energetycznej procesów przemysłowych i budynków, jak również – w sposób pośredni – stanowi podstawę do przewidywań rozwoju gospodarczego danego obszaru. W lutym 2021 r. przyjęta została Polityka Energetyczna Polski do 2040 r. zakładająca między innymi stopniowe odejście od źródeł węglowych, rozwój energetyki wiatrowej na morzu, a także budowę elektrowni jądrowych w celu pokrycia krajowego zapotrzebowania na moc i energię. W międzyczasie przedstawione zostały projekcje w ramach Sprawozdania z wyników monitorowania bezpieczeństwa dostaw energii elektrycznej, a także Plan Rozwoju Systemu Przesyłowego do 2030 roku. Jednocześnie rynkiem energetycznym zachwiała najpierw pandemia koronawirusa COVID-19, a następnie proces odbudowy gospodarek światowych po niej. W rezultacie nieco wyraźniej zarysowały się wyzwania oraz perspektywy dla sektora energetycznego Polski, które zostały opisane w niniejszym artykule.
EN
The state’s energy policy is the direction of the development of the energy and fuel sector, and also affects the issue of air quality, the development of electromobility, activities in the field of energy efficiency of industrial processes and buildings, and indirectly forms the basis for forecasting the economic development of a given area. In February 2021, the Polish Energy Policy until 2040 was adopted, assuming, among others, a gradual departure from coal sources, the development of offshore wind energy, as well as the construction of nuclear power plants to cover the domestic demand for power and energy. In the meantime, the projections were presented as part of the Report on the results of monitoring the security of electricity supply, as well as the Transmission System Development Plan until 2030. At the same time, the energy market was first shaken by the COVID-19 coronavirus pandemic, and then the process of rebuilding global economies after it. As a result, the challenges and prospects for the Polish energy sector, described in this article, have outlined a little more clearly.
PL
W artykule pokazano sposób znalezienia współczynników oporu aerodynamicznego wiążących liczby Reynoldsa, Archimedesa i Froude’a w przypadku kotła fluidalnego o mocy elektrycznej 261 MW. Uzyskane równania mogą posłużyć do skalowania kotła.
EN
This paper shows how to find the aerodynamic drag coefficients that combine Reynolds, Archimedes, and Froude numbers for a fluidized bed boiler with an electrical capacity of 261 MW. The obtained equations can be used to scale the boiler.
EN
This work presents the results of a numerical study of the working processes of burning lignite in a vortex furnace with swirling countercurrent flows. The results of computer simulation of the processes of burning lignite with a moisture content of 30%, an ash content of 20% and 35% and a higher calorific value of Qрв = 13.9 MJ/kg and 9.7 MJ/kg, respectively are given. The fields of temperature distribution, gas velocity and particle trajectory in the volume and at the outlet of the furnace are determined. The values of the swirling flow velocity near the exit from the furnace reach 150-170 m/s. Mechanical underburning is 3.7% and 9.4% depending on the ash content. The results of a numerical study have showed that the diameter of lignite particles affects their combustion process: coke particles with an initial diameter from 25 microns to 250 microns burn out by 96%. The furnace provides a complete combustion of pulverized coal particles - 99.8% and of volatiles - 100% at volumetric heat stress in the 2500 kW/m3 furnace. The afterburning of fuel particles containing carbon is ensured by their circulation.
EN
Berbești mining basin, located in the area of the Getic Subcarpathians, is part of the Central Heating Power Plant (CHPP) Govora, in fact representing the mining division, and has four open pits: Alunu, Olteț, Panga, and West Berbești. Given that, at least in Europe, there is the issue of giving up energy production based on the burning of fossil fuels, especially coal, the four open pits will be in operation for a relatively short period of time, and one of the major problems related to the exploitation of lignite deposits is that of the post-closure stability of the lands in the influence area. The research was conducted in such a way as to take into account in the stability analysis the factors and natural causes that predispose the lands in the Getic Subcarpathians to landslides, factors and anthropogenic causes (lignite mining) and the effect of their concomitant action. These stability analyzes took into account different hypotheses related to the geometry of the final slopes and the influence of external factors. Also, a predictive analysis of the long-term stability of the lands (especially the final slopes of the open pits – as they were designed) was carried out, taking into account the behavior over time of the disturbed rocks. Based on the results obtained, after a series of statistical processing, a risk analysis was performed, using a methodology developed by a part of the research team. It should be noted from the outset that the research focused on the West Berbești and Panga mining perimeters, as the lignite mining activity will be completed by the end of 2022 (at most). However, taking into account the similar conditions (geology, morphology, tectonics, seismic zoning, weather and climatic conditions, applied exploitation methods), the research team considers that a significant part of the conclusions and recommendations contained in this study can be considered valid and for the rest of the active perimeters (Alunu and Olteț open pits). In this context, the study ends with a series of conclusions on the stability of land in the Berbești mining basin (West Berbești and Panga perimeters) at the time of cessation of productive activities and recommendations that once put into practice will ensure longterm land stability.
PL
Zagłębie Górnicze Berbești, położone na obszarze Podkarpacia Getyckiego, jest częścią Zagłębia Centralnego (EC) Govora, posiada cztery odkrywki: Alunu, Olteț, Panga i West Berbești. Biorąc pod uwagę, że w Europie istnieje koncepcja rezygnacji z produkcji energii w oparciu o spalanie paliw kopalnych, zwłaszcza węgla, relatywnie krótko funkcjonować będą cztery odkrywki. Jednym z głównych problemów związanych z eksploatacją złóż węgla brunatnego jest stabilność gruntów na obszarze górniczym po zamknięciu eksploatacji. Badania przeprowadzono w taki sposób, aby uwzględnić w analizie stateczności czynniki i przyczyny naturalne, tenedencje terenów Podkarpacia Getyckiego do osuwisk, czynników i przyczyn antropogenicznych (wydobycie węgla brunatnego) oraz skutków oddziaływań towarzyszących. Analizy stateczności uwzględniały różne hipotezy związane z geometrią zboczy i wpływem czynników zewnętrznych. Przeprowadzono także analizę predykcyjną długoterminowej stabilności gruntów (zwłaszcza końcowych zboczy odkrywek) z uwzględnieniem zachowania się gruntów w czasie. Na podstawie uzyskanych wyników, po wykonaniu serii analiz statystycznych przeprowadzono analizę ryzyka, wykorzystując metodologię opracowaną przez część zespołu badawczego. Na wstępie należy zaznaczyć, że badania koncentrowały się na obszarach wydobywczych West Berbești i Panga, ponieważ wydobycie węgla brunatnego zostanie zakończone do końca 2022 roku. Biorąc jednak pod uwagę podobne warunki (geologia, morfologia, tektonika, strefy sejsmiczne, warunki pogodowe i klimatyczne, zastosowanych metod eksploatacji), zespół badawczy uważa, że znaczna część zawartych wniosków i rekomendacji w tym badaniu można uznać za ważne i dla pozostałych obszarów czynnych (odkrywki Alunu i Olteț). W tym kontekście opracowanie kończy się szeregiem wniosków dotyczących stabilności gruntów w zagłębiu górniczym Berbești (zachodnie Berbești i obwód Panga) w momencie zaprzestania działalności produkcyjnej oraz zalecenia, które po wprowadzeniu w życie zapewnią długoterminową stabilność gruntów.
EN
Formation of so-called open-pit lakes has become an increasingly common practice in Romania (more precisely in the Oltenia Mining Basin, where the lignite deposit contained in Dacian and Romanian formations was and is extracted through open-pits). The flooding process of the remaining gaps is in general a natural one, as water comes from underground sources (phreatic and pressurized aquifers) and from precipitations (including runoff waters from the surrounding terrains). This practice is considered to be a type of ecological reconstruction of former exploitation areas and has been applied worldwide for quite a time (in Germany, Poland, Czech Republic, Spain, USA, Australia, etc.). The present paper aims to present some ecological aspects regarding these lakes, and, as case study, we chose the lake formed in the remaining gap of Urdari open-pit (within the Rovinari Mining Basin). However, the authors consider that given the multitude of similar conditions (bioclimate, geology, topography, etc.) in which they form, the preliminary conclusions of this study can be extrapolated for other lakes in the area (existing, such South Peșteana and Moi, or planned, such as Roșia and North Peșteana). This study presents data on the existing biotope and biocenoses (restricted to species identification), without going into specific details about populations, ecosystem production, energy and matter flows within it, as these investigations demand a longer period of time and more resources and are foreseen for a future development stage of this study.
PL
Tworzenie jezior w wyrobiskach pozostałych po kopalniach odkrywkowych staje się coraz bardziej powszechną praktyką w Rumunii (dokładniej w Zagłębiu Górniczym Oltenia, gdzie metodą odkrywkową wydobywane było i jest złoże węgla brunatnego zawarte w formacjach dackiej i rumuńskiej). Proces zalewania pozostałych wyrobisk jest na ogół naturalny, gdyż woda pochodzi ze źródeł podziemnych (warstwy wodonośne freatyczne i ciśnieniowe) oraz z opadów atmosferycznych (w tym spływów z otaczających terenów). Praktyka ta jest uważana za rodzaj ekologicznej rekonstrukcji dawnych terenów eksploatacyjnych i od dłuższego czasu jest stosowana na całym świecie (w Niemczech, Polsce, Czechach, Hiszpanii, USA, Australii itd.). Niniejszy artykuł ma na celu przedstawienie niektórych aspektów ekologicznych dotyczących tych jezior, a jako studium przypadku wybrano jezioro utworzone w wyrobisku pozostałym po odkrywce Urdari (w obrębie Zagłębia Górniczego Rovinari). Autorzy uważają jednak, że biorąc pod uwagę mnogość podobnych warunków (bioklimat, geologia, topografia itp.), w których te jeziora powstają, wstępne wnioski z tego badania można ekstrapolować na inne jeziora na tym obszarze (istniejące, takie jak Południowa Peșteana i Moi lub planowane, takie jak Roșia i Północna Peșteana). Niniejsze opracowanie przedstawia dane na temat istniejącego biotopu i biocenoz (ograniczone do identyfikacji gatunków), bez wchodzenia w szczegółowe dane dotyczące populacji, produkcji ekosystemu, przepływów energii i materii w jego obrębie, ponieważ badania te wymagają dłuższego czasu oraz większej ilości zasobów i przewidziane są w przyszłym etapie badań.
EN
In Kosovo, the current production of electricity depends mainly on its generation, which is based on the burning of lignite in the power plants (Kosovo power plants A and B). Significant changes were found in the concentrations of heavy metals in various sediment, soil, and water sample locations. Physicochemical parameters such as temperature, pH, dissolved oxygen, chemical oxygen demand, total dissolved solids, biochemical oxygen demand, and main ions (SO42-, PO43-, Cl-, NO3-, and NH4+) were monitored to obtain accurate and representative data. The study indicates that there is mild contamination from these elements in the river, however, to reach a clear conclusion, additional research should be done in the study area. The sampling took place over three months in 2018 (April, July and October). The data analysis revealed that the concentration of heavy metals such as Pb, Zn, Fe, Ni, Cd, Mn, Al, Cu, and Cr in several examined samples exceeds the maximum permissible limits. Substantial levels of metal pollution in the samples collected in three distinct locations were found.
PL
Problem produkcji energii z paliw kopalnych, a w szczególności z węgla kamiennego i brunatnego, stoi w sprzeczności z koncepcją zrównoważonego rozwoju i wymaga nowych rozwiązań uwzględniających integrację z OZE. Węgiel nadal jest znaczącym paliwem używanym na świecie do produkcji energii [1]. Dozowanie waloryzowanej/toryfikowanej biomasy o wysokiej temperaturze (190-300°C) wraz z torgazem bezpośrednio z toryfikatora do węgla brunatnego pozwala na podsuszenie węgla brunatnego, który kolejno wraz z toryfikatem można zmieszać z węglem kamiennym przed młynami.
PL
Węgiel brunatny przedstawiany jest w mediach jako najgorsze źródło paliwa do produkcji energii elektrycznej, powodujące katastrofę ekologiczną. Tymczasem emisyjność elektrowni na węgiel brunatny spełnia wyśrubowane normy UE, sprawność nowych bloków przekracza 40% (Jurdziak&Kawalec, 2010) i jest porównywalna ze sprawnością nowych bloków na węgiel kamienny. Główną zaletą brunatnego paliwa jest jednak to, że koszty eksploatacji nie zależą od cen paliw na świecie, dlatego obecnie, w okresie gwałtownego wzrostu cen wszystkich paliw, mógłby on pełnić rolę kotwicy antyinflacyjnej.
first rewind previous Strona / 31 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.