Ograniczanie wyników
Czasopisma help
Autorzy help
Lata help
Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 112

Liczba wyników na stronie
first rewind previous Strona / 6 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  system fotowoltaiczny
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 6 next fast forward last
PL
Przedmiotem badań była typowa prosumencka mikroinstalacja fotowotaiczna (PV) o całkowitej mocy szczytowej 4,26 kWp, dołączona do sieci elektroenergetycznej w centralnej Polsce. Instalacja została zbudowana w 2017 roku i jest rozliczana z operatorem sieci dystrybucyjnej na zasadach Net-Meteringu. W pracy dokonano szczegółowej analizy stopnia autokonsumpcji i samowystarczalnośći energetycznej na podstawie danych z monitoringu instalacji PV oraz godzinowych bilansów energii elektrycznej oddawanej i pobieranej z sieci, udostępnianych przez operatora sieci dystrybucyjnej. W konkluzji zaproponowano wariantową metodę doboru wielkości magazynu energii elektrycznej, który zwiększy stopień autokonsumpcji i samowystarczalnośći energetycznej w bilansie całorocznym dla rozpatrywanego przypadku.
EN
The subject of the study was a typical prosumer photovoltaic (PV) micro-installation with a total peak capacity of 4.26 kWp, connected to the electricity grid in central Poland. The installation was built in 2017 and is billed to the distribution network operator on a Net-Metering basis. The paper makes a detailed analysis of the degree of self-consumption and self-sufficiency in energy, based on monitoring data of the PV installation and hourly balances of electricity given to and taken from the grid, provided by the distribution network operator. It concludes by proposing a variant method for Sizing electricity storage that will increase the degree of autoconsumption and energy self-sufficiency in the year-round balance for the case under consideration.
PL
Systemy fotowoltaiczne są coraz bardziej popularne. Na początku zakładanie paneli fotowoltaicznych było promowane poprzez możliwość korzystnego „magazynowania” energii elektrycznej w sieci. Jednak im więcej instalacji było podłączanych do sieci, tym to lokalnie rozwiązanie generowało więcej problemów. Stąd zmiany w prawie promujące obecnie stosowanie magazynów energii elektrycznej. Co do zasady taki magazyn energii powinien magazynować nadwyżki energii wyprodukowanej przez panele fotowoltaiczne po to, by móc ją później wykorzystać. W przypadku przydomowych magazynów energii chodzi o dobowe nadwyżki produkcji.
PL
W artykule przedstawiono algorytm optymalizacyjny wykorzystujący sztuczne sieci neuronowe (ANN) do śledzenia maksymalnego punktu mocy (ang. Maximum Power Point) dla systemu (siłowni) PV o mocy 100 kWp podłączonej do dystrybucyjnej sieci zasilającej. Efektywność pracy opracowanego algorytmu MPPT (ang. Maximum Power Point Tracking) porównano z powszechnie opisywanymi w literaturze algorytmami śledzenia maksymalnego punktu pracy systemów fotowoltaicznych takimi jak metoda zaburzania i obserwacji (ang.Perturbation and observe method) oraz metoda przyrostów przewodności (ang. Conductance incremental method). Dla nowoczesnych, dużych systemów fotowoltaicznych, zagadnienie maksymalizacji wytwarzania energii dla różnych zmiennych warunków pogodowych (natężenie promieniowania słonecznego, temperatura paneli fotowoltaicznych) jest bardzo istotne. Na podstawie analizy otrzymanych wyników z symulacji stwierdzono , że metoda MPPT ANN wykorzystująca sztuczne sieci neuronowe pozwala uzyskać wyższą wartość aktualnej mocy elektrycznej wytworzonej z badanego systemu PV i oddawanej do sieci elektroenergetycznej w porównaniu z innymi popularnymi metodami.
EN
The article presents an optimization algorithm using artificial neural networks (ANN) to track the maximum power point for a 100 kWp PV system connected to the distribution power grid. The efficiency of the developed MPPT algorithm was compared with algorithms commonly described in the literature for tracking the maximum operating point of photovoltaic systems, such as the disturbance and observation method and the conductivity increment method. For modern, large photovoltaic systems, the issue of maximizing energy production for various variable weather conditions (irradiation, temperature of photovoltaic panels) is very important. Based on the analysis of the obtained simulation results, it was found that the MPPT ANN method based on artificial neural networks allows to obtain a higher value of the current electrical power generated from the tested PV system and transfered to the power grid compared to other popular methods.
EN
These Applications of fractional calculus are becoming more and more effective, adaptable, and have produced positive outcomes in a variety of engineering and scientific domains. In this paper, a fuzzy fractional-order PI-based control approach for grid-connected photovoltaic (PV) systems is presented. The various advantages of multi-level inverters (MLIs) in industrial and grid-connected applications have resulted to their increasing application in recent years. A five-level neutral point (NPC) inverter is used to integrate PV electricity into the electrical grid with minimal harmonic distortions and highest power capacity. The output voltage of the inverter must be maintained in order to connect to a grid, even though that the photovoltaic output voltage varies considerably with solar radiation. To achieve this, three fuzzy fractional order PI (FFOPI)controllers were used to control the inverter output voltage (Vdc), direct current (Id), and quadratic current (Iq) around a reference values. A further comparison is made with the fuzzy PI (FPI). According to research, the FFOPI controller outperforms the FPI controller in terms of performance.
PL
Te zastosowania rachunku ułamkowego stają się coraz bardziej efektywne, elastyczne i dają pozytywne rezultaty w różnych dziedzinach inżynierii i nauki. W tym artykule przedstawiono podejście oparte na rozmytym ułamkowym rzędzie sterowania PI dla systemów fotowoltaicznych (PV) podłączonych do sieci. Różne zalety falowników wielopoziomowych (MLI) w zastosowaniach przemysłowych i podłączonych do sieci spowodowały ich rosnące zastosowanie w ostatnich latach. Falownik z pięciopoziomowym punktem neutralnym (NPC) służy do włączania energii elektrycznej z fotowoltaiki do sieci elektrycznej przy minimalnych zniekształceniach harmonicznych i najwyższej mocy. Napięcie wyjściowe falownika musi być utrzymywane w celu podłączenia do sieci, mimo że napięcie wyjściowe fotowoltaiki znacznie się zmienia w zależności od promieniowania słonecznego. Aby to osiągnąć, zastosowano trzy rozmyte regulatory PI ułamkowego rzędu (FFOPI) do sterowania napięciem wyjściowym falownika (Vdc), prądem stałym (Id) i prądem kwadratowym (Iq) wokół wartości odniesienia. Dalsze porównanie przeprowadza się z rozmytym PI (FPI). Według badań kontroler FFOPI przewyższa kontroler FPI pod względem wydajnoś.
5
Content available remote Enhancement performance of DSTATCOM depending on PV system supply control
EN
This article examines the impacts of a transient analysis of a compensator of static synchronous on a system of distribution power (DSTATCOM) on power quality when a PV system DC input source is utilised to supply the system. Due to the nature of these sources' operation, including renewable energy on the input power supply has a variety of ramifications for DSTATCOM's operation. In order to understand the variance in temporal response and its impact on the compensatory process, the dynamic response of the distribution system is investigated under the influence of both battery and PV system sources (PV-Battery). Renewable energy is connected across the dc-link capacitor channel to characterize their impact on the power system's dynamic performance. In this study, three scenarios were investigated: first, photovoltaic (PV) cells are connected solely via the dc-link, second, battery storage is connected solely, and third, a PV system structure (PV cells + battery storage) is explored. DSTATCOM is used to compensate for the reduction in reactive and active power that happens during balanced and unbalanced operation of non-linear loads. The presence of a renewable source enhances the system's power quality by reducing the current source's harmonic components. The Star / Delta transformer is also used to split the three-phase legs of the DSTATCOM VSC, providing a channel for the fundamental zero sequence and a balanced three-phase current. STATCOM control circuit based on synchronous reference frames (SRF).
PL
W niniejszym artykule zbadano wpływ analizy stanu nieustalonego kompensatora synchronicznej statycznej na system zasilania dystrybucyjnego (DSTATCOM) na jakość energii, gdy źródło wejściowe DC systemu fotowoltaicznego jest wykorzystywane do zasilania systemu. Ze względu na charakter pracy tych źródeł, uwzględnianie energii odnawialnej na zasilaniu wejściowym ma różne konsekwencje dla pracy DSTATCOM. Aby zrozumieć wariancję odpowiedzi czasowej i jej wpływ na proces kompensacyjny, badana jest dynamiczna odpowiedź systemu dystrybucyjnego pod wpływem zarówno źródeł baterii, jak i systemu PV (PV-Battery). Energia odnawialna jest podłączona przez kanał kondensatora dc-link, aby scharakteryzować ich wpływ na dynamikę systemu zasilania. W niniejszym badaniu zbadano trzy scenariusze: po pierwsze, ogniwa fotowoltaiczne (PV) są połączone wyłącznie za pośrednictwem łącza prądu stałego, po drugie magazynowanie baterii jest podłączone wyłącznie, a po trzecie, zbadano strukturę systemu PV (ogniwa fotowoltaiczne + magazynowanie baterii). DSTATCOM służy do kompensacji redukcji mocy biernej i czynnej, która ma miejsce podczas pracy zrównoważonej i niezrównoważonej obciążeń nieliniowych. Obecność źródła odnawialnego poprawia jakość zasilania systemu poprzez redukcję składowych harmonicznych źródła prądu. Transformator gwiazda/trójkąt jest również używany do rozdzielenia trójfazowych odgałęzień DSTATCOM VSC, zapewniając kanał dla podstawowej sekwencji zerowej i zrównoważonego prądu trójfazowego. Obwód sterowania STATCOM oparty na synchronicznych ramkach odniesienia (SRF).
6
Content available remote Design PV power system: a case between two different types of solar modules
EN
A photovoltaic (PV) is a technical terminology that is used to generate electricity from sunlight. Solar energy is one of the solutions for solving the electricity needs in any area. Designing a grid-tie PV system based on real data is very important to utilize a great system. The case study was taken on a national thermal power corporation (NTPC) that lies at Gomti Nager in India. In this work, Newzealand mathematical calculation method is used to design a PV system and a comparison between conventional PV systems and nano PV systems is made. It has been concluded that the nano-PV system cost was lesser than the conventional PV system.
PL
Fotowoltaika (PV) to terminologia techniczna używana do wytwarzania energii elektrycznej ze światła słonecznego. Energia słoneczna jest jednym z rozwiązań pozwalających na zaspokojenie zapotrzebowania na energię elektryczną w dowolnym obszarze. Projektowanie sieciowego systemu fotowoltaicznego opartego na rzeczywistych danych jest bardzo ważne, aby wykorzystać świetny system. Studium przypadku dotyczyło krajowej korporacji energetycznej (NTPC), która znajduje się w Gomti Nager w Indiach. W tej pracy do zaprojektowania systemu fotowoltaicznego zastosowano matematyczną metodę obliczeń Newzealand i dokonano porównania między konwencjonalnymi systemami fotowoltaicznymi a nano systemami fotowoltaicznymi. Stwierdzono, że koszt systemu nano-PV był niższy niż w przypadku konwencjonalnego systemu PV.
7
Content available remote A novel method to improve the power quality via hybrid system
EN
Ever increasing electricity demand as well as the rapid depletion of fossil fuels have increased the need for hybrid power systems that integrate distributed energy resource (DER) systems; such as solar photovoltaic (PV) systems and battery storage systems; with electrical grids. Therefore, this present study used MATLAB/Simulink to demonstrate the ability of DER inverters to provide reactive power that regulates grid voltage, decreases the total harmonic distortion (THD), decreases the amount of active power lost, and improves the capacity and power quality of a modified IEEE 13-bus test system. The study found that the injection/Absorption of the reactive power from a 400KW (PV-Battery) system in bus 675, 500KW (PV-Battery) system in bus 671, and 200 KW.h battery storage system in bus 634 decreased the power output of the main generator by 24.6%. When used in situ, the reactive power capability of the DER inverters significantly improved the voltage while an injection of reactive power decreased the THD voltage of bus 675 phase B by 81.26% when absorbing reactive power as well as decreased active power losses.
PL
Stale rosnące zapotrzebowanie na energię elektryczną oraz szybkie wyczerpywanie się paliw kopalnych zwiększyły zapotrzebowanie na hybrydowe systemy zasilania, które integrują systemy rozproszonych źródeł energii (DER); takie jak systemy fotowoltaiczne (PV) i systemy magazynowania baterii; z sieciami elektrycznymi. Dlatego w niniejszym badaniu wykorzystano MATLAB/Simulink do wykazania zdolności falowników DER do dostarczania mocy biernej, która reguluje napięcie sieci, zmniejsza całkowite zniekształcenia harmoniczne (THD), zmniejsza ilość utraconej mocy czynnej oraz poprawia wydajność i jakość mocy zmodyfikowany system testowy IEEE 13-bus. Badanie wykazało, że wtrysk/pobór mocy biernej z systemu 400KW (PV-Battery) w magistrali 675, 500KW (PV-Battery) w magistrali 671 i 200KW.h systemu magazynowania baterii w magistrali 634 zmniejszyło moc moc głównego generatora o 24,6%. W przypadku zastosowania in situ, moc bierna falowników DER znacznie poprawiła napięcie, podczas gdy wprowadzenie mocy biernej zmniejszyło napięcie THD szyny 675 fazy B o 81,26% podczas pochłaniania mocy biernej, a także zmniejszyło straty mocy czynnej.
PL
W artykule poddano analizie zastosowanie systemów fotowoltaicznych w budynku jednorodzinnym. Analizowano dwa systemy fotowoltaiczne: panele fotowoltaiczne i dachówki solarne. Przeprowadzono wielokryterialną analizę porównawczą w aspektach kryteriów: wiatroodporności, obciążenia śniegiem, wytrzymałości termicznej, możliwości zdalnego sterowania, uniwersalności rozwiązania, kosztu instalacji, kosztu utrzymania w cyklu życia zastosowanej technologii, gwarancji na elementy systemu (zapewnienie producenta o sprawności systemu oraz gwarancji wykonania bezpłatnych napraw), estetyczności, ekologiczności. Opracowano metodykę badań. Wybrano kryteria, nadano im wagi, porównano kryteria parami, wykonano aplikację obliczeniową w programie EXCEL,prawidłowość obliczeń zweryfikowano obliczoną wartością współczynnika RI (RI = 9,68% max= 10%). Badaniom wielokryterialnym poddano zaprojektowany budynek jednorodzinny z zastosowaniem dwóch rodzajów systemów fotowoltaicznych. Wykonano analizę wielokryterialną, na podstawie, której sformułowano wnioski.
EN
The article analyzes the use of photovoltaic systems in a single-family building. Two photovoltaic systems were analyzed: photovoltaic panels and solar roof tiles. A multi-criteria comparative analysis was carried out in the following aspects of the criteria: wind resistance, snow load, thermal resistance, remote control capability, universality of the solution, cost of installation, cost of maintenance in the life cycle of the technology used, warranty for system components (the manufacturer’s assurance of the system’s efficiency and guarantee of the performance of free repairs), aesthetics, eco-friendliness. Research methodology was developed. Criteria were selected, given weights, criteria were compared in pairs, a calculation application was made in the EXCEL program, the correctness of the calculations was verified by the calculated value of the RI coefficient (RI = 9,68%max= 10%). The designed single-family building with the use of two types of photovoltaic systems was subjected to multi-criteria tests. A multi-criteria analysis was performed, on the basis of which conclusions were formulated.
EN
The global warming phenomenon, primarily caused by the emissions from conventional energy sources, has become a pressing concern worldwide. Greenhouse gases (GHGs), particularly carbon dioxide (CO2), emitted into the atmosphere contribute significantly to this issue. They have diverse impacts on climate, ecosystems, public health, and socio-economic systems, highlighting the need for comprehensive mitigation and adaptation strategies. To address this problem and minimize GHG emissions, renewable energy sources have emerged as the most promising alternative for power generation. These sources offer a sustainable and clean alternative to fossil fuels, mitigating climate change, reducing air pollution, and fostering energy independence. In the context of this study, a 100 kW solar photovoltaic (PV) station was proposed in Ma’an, Jordan, as a sustainable solution. The effectiveness of this PV station in mitigating GHG emissions was evaluated by comparing it to a base case involving an oil station. To perform this analysis, RETScreen software, a widely recognized tool for assessing renewable energy projects, was used to examine the environmental impact of switching from a conventional energy system to a renewable energy system. The results obtained from the analysis revealed a remarkable reduction in annual gross GHG emissions in the proposed case compared to the base case. Specifically, the emissions would be reduced by 89%, translating to an annual reduction of 49.9 tonnes of CO2. These findings underscore the significant potential of the proposed solar PV station in curbing the emissions responsible for global warming. By significantly reducing GHG emissions, the solar PV station contributes to creating a more sustainable future, aligned with the principles of environmental preservation and climate change mitigation.
PL
Zjawisko globalnego ocieplenia, przede wszystkim spowodowane emisjami z konwencjonalnych źródeł energii, stało się palącym problemem na całym świecie. Emitowane do atmosfery gazy cieplarniane (GHG), w tym zwłaszcza dwutlenek węgla (CO2), w istotny sposób przyczyniają się do tego problemu. Mają one różnorodny wpływ na klimat, ekosystemy, zdrowie publiczne oraz systemy społeczno-gospodarcze, co podkreśla potrzebę kompleksowych strategii zarówno w zakresie ich ograniczania, jak i adaptacji. Aby rozwiązać ten problem i zminimalizować emisje GHG, źródła energii odnawialnej pojawiły się jako najbardziej obiecująca alternatywa dla wytwarzania energii. Źródła te oferują zrównoważoną i czystą alternatywę dla paliw kopalnych, przyczyniając się do łagodzenia zmian klimatycznych, redukcji zanieczyszczeń powietrza oraz promowania niezależności energetycznej. Jako trwałe rozwiązanie w kontekście tych badań zaproponowano stację fotowoltaiczną o mocy 100 kW w miejscowości Ma’an w Jordanii. Skuteczność tej stacji fotowoltaicznej w ograniczaniu emisji GHG została oceniona poprzez porównanie jej z przypadkiem bazowym, obejmującym stację ropną. W celu przeprowadzenia tej analizy wykorzystano oprogramowanie RETScreen, powszechnie uznawane narzędzie do oceny projektów związanych z energią odnawialną. Celem było zbadanie wpływu środowiskowego przejścia od konwencjonalnego systemu energetycznego do systemu opartego na energii odnawialnej. Wyniki analizy wykazały znaczną redukcję rocznych emisji GHG w zaproponowanym przypadku w porównaniu z przypadkiem bazowym. Konkretnie, emisje zostałyby zredukowane o 89%, co przekłada się na roczną redukcję o 49,9 ton CO2. Te wyniki podkreślają znaczący potencjał proponowanej stacji fotowoltaicznej w zwalczaniu emisji odpowiedzialnych za globalne ocieplenie. Mając na uwadze znaczne zmniejszenie emisji GHG, stacja fotowoltaiczna przyczynia się do stworzenia bardziej zrównoważonej przyszłości, zgodnej z zasadami ochrony środowiska i łagodzenia zmian klimatycznych.
EN
Renewable energy sources especially solar energy connected to an electrical grid system by using power electronic devices, known that devices degrade the power quality and especially generate harmonic currents. This article presents the study investigation and propagation of harmonics in the integration system of an electric grid connected to the photovoltaic system in the presence or not of a non-linear load (polluting load). In this study, the perturb and observe type MPPT controller for the boost converter and the PWM control for the three-phase inverter which provides the connection are used. We use a passive filtering technique (single and multiple filters) to mitigate the harmonic currents generated by the non-linear load. In the first case where the integration system is alone, the results obtained show that the values of the total harmonic distortion (THD) rates are within the standard used. But in the case of the presence of the non-linear load, the THD values are higher than the used norm. After using our proposed technique, the values of THD obtained are in the norm used for the application of a tuned filter at the fifth harmonic, and better results find with using of multiple filters (fifth and seventh).
EN
This article addresses the problem of fault early detection in photovoltaic systems. In the production field, solar power plants consist of many photovoltaic arrays, which may suffer from many different types of malfunctions over time. Hence, fault early detection before it affects PV systems and leads to a full system failure is essential to monitor these systems. The fields of control and monitoring of systems have been extensively approached by many researchers using various fault detection methods. Despite all this research, to early detect and locate faults in a very large photovoltaic power plant, we must, in particular, think of an effective method that allows us to do so at the lowest costs and time. Thus, we propose a new robust technique based on the inverse of the belonging individual Gaussian probability (IBIGP) to early detect and locate faults in the power curve as well as in the Infrared image of the photovoltaic systems. While most fault detection methods are well incorporated in other domains, the IBIGP technique is still in its infancy in the photovoltaic field. We will show, however, in this work that the IBIGP technique is a very promising tool for fault early detection enhancement.
EN
Solar energy has become one of the most important renewable energies in the world. With the increasing installation of power plants in the world, the supervision and diagnosis of photovoltaic systems have become an important challenge with the increased occurrence of various internal and external faults. Indeed, this work proposes a new solar power plant diagnosis based on the artificial neural network approach. The developed model was to improve the performance and reliability of the power plant located in Tamanrasset, Algeria, which is subjected to varying weather conditions in terms of radiation and ambient temperature. By using the real data collected from the studied system, this approach allow to increase electricity production and address any issues that may arise quickly, ensuring uninterrupted power supply for the region. Neural networks have shown interesting results with high accuracy. This fault diagnosis approach allows to determine the time of occurrence of a fault affecting the examined PV system. Also, allow an early detection of failures and degradation of the system, which contributes to improving the productivity of this photovoltaic installation. With a significant reduction in the time needed to repair the damage caused by these faults and improve the reliability and continuity of the electrical energy production service.
13
Content available Economical analysis of electric vehicles in Poland
EN
The paper presents results obtained from calculations conducted to receive information on the capability of photovoltaic systems to power electric vehicles in regular use. The annual distance travelled was divided in nine categories. Every aspect of this analysis was suitable for Polish market and parameters given by the climate that is connected with geographical location of Poland. It is worth mentioning that one of the key elements is the law for renewable energy, that is the key aspect to economical benefits that come from so called green investments. Energy law was also taken into account during this simulation. All those aspects together summarized to a conclusions that Polish market is not as competitive as other European markets when electric propulsion is present in the system.
EN
This paper presents research involving the selection of floating photovoltaics (FPV) system constructions under Polish conditions using a multi-criteria method incorporating criteria compensation reduction following the strong sustainability paradigm. The applied method is called SSP-COPRAS (Strong Sustainability based Complex Proportional Assessment). The selection was carried out among four FPV designs and one reference conventional ground-mounted PV (GMPV) system. Data were obtained from the reference research paper. The results proved that the FPV system has a noticeable potential for making it competitive with GMPV, especially when technical criteria and criteria compensation reduction play an important role. However, GMPV's higher ratings, especially in terms of economics, show that FPV would have to reach a higher product maturity to become realistically competitive.
EN
The paper presents the original design of the Off-Grid PV mini-system for powering separate circuits of the residential building. The PV system was used interchangeably for comparative purposes batteries AGM and Li-Ion for energy storage. The PV system provides autonomy to separate building circuits only in the summer months, for Li-Ion energy storage, at the installation location in central Poland. An automatic power switch was used, which turned on the mains supply in the event the battery was discharged. The controller is configured in two ways for priority for solar systems set in summer or priority for the power grid in winter. The next stage of work compares the discharge times of two types of batteries, assuming constant load on the AC side of the inverter. Based on these measurements, the relative autonomy times of the PV system were estimated for the assumed load with different types of batteries in summer and winter. The time of supplying selected circuits of a residential building in the tests conducted for the Li-Ion battery to the AGM battery increased by approx. 50% and increased with increasing load.
PL
W artykule przedstawiono autorski projekt minisystemu fotowoltaicznego Off-Grid do zasilania wydzielonych obwodów budynku mieszkalnego. W systemie PV zastosowano zamiennie w celach porównawczych akumulatory AGM i Li-Ion do magazynowania energii. System PV zapewnia autonomię wydzielonych obwodów budynku tylko w miesiącach letnich, tylko dla zasobnika energii Li-Ion, w miejscu instalacji w centralnej Polsce. Zastosowano automatyczny wyłącznik zasilania, który włącza zasilanie sieciowe w przypadku rozładowania akumulatora. Sterownik jest skonfigurowany na dwa sposoby priorytet dla instalacji solarnych ustawiony w lecie lub priorytet dla sieci energetycznej w zimie. W kolejnym etapie prac przedstawiono porównanie czasów rozładowania dwóch typów akumulatorów, przy założeniu stałego obciążenia po stronie AC falownika. Na podstawie tych pomiarów oszacowano względne czasy autonomii systemu PV dla założonego obciążenia z różnymi typami akumulatorów w okresie letnim i zimowym. Czas zasilania wybranych obwodów budynku mieszkalnego w przeprowadzonych testach dla akumulatora Li-Ion w stosunku do akumulatora AGM wzrósł o ok. 50% i zwiększał się wraz ze wzrostem obciążenia.
EN
The inconsistency of solar irradiance and temperature have led to unpredictable output power fluctuation of photovoltaic (PV) system. This paper proposes a simple control scheme for hybrid energy storage (HES) system to mitigate the long-term and short-term output power fluctuations of the PV system. The proposed control scheme employed the fuzzy logic controller in order to manage the power compensation of the HES system and to maintain the state-of-charge (SOC) level of the HES system within safe operating limits during the mitigation process. In the control scheme, the long-term output power fluctuation is eliminated by using battery energy storage, while short-term output fluctuation is compensated using the ultracapacitor. Apart from that, an hourly PV power dispatch was applied in the control scheme since the grid-connected PV system was considered in this study. The simulation evaluations of PV/HES with the proposed control scheme was conducted in the MATLAB/Simulink environment. The effectiveness of the proposed control scheme was verified through several case studies. Initially, the control scheme was evaluated with different initial SOC levels of HES. Then, the control scheme was evaluated using five days of actual PV system output in order to verify the robustness of the proposed control scheme in actual circumstances. Overall, the simulation evaluation was verified that the proposed control scheme of the PV/HES system effectively mitigates the output power fluctuations of the PV system and output power is dispatched out to the utility grid on an hourly basis. Also, it was able to regulate the SOC of HES at the operational limit throughout the process. The simulation result showed the control scheme successfully reduced the unacceptable output power fluctuation from 20% to less than 1%. The results also showed the SOC of HES was regulated within the range of 38%-75% and 42%-60% of its capacity along the process, respectively.
PL
Niespójność natężenia promieniowania słonecznego i temperatury doprowadziła do nieprzewidywalnych wahań mocy wyjściowej systemu fotowoltaicznego (PV). W niniejszym artykule zaproponowano prosty schemat sterowania hybrydowym systemem magazynowania energii (HES) w celu złagodzenia długo- i krótkoterminowych wahań mocy wyjściowej systemu fotowoltaicznego. Zaproponowany schemat sterowania wykorzystywał sterownik logiki rozmytej w celu zarządzania kompensacją mocy systemu HES i utrzymania poziomu stanu naładowania (SOC) systemu HES w bezpiecznych granicach operacyjnych podczas procesu mitygacji. W schemacie sterowania długoterminowe wahania mocy wyjściowej są eliminowane przez zastosowanie magazynowania energii akumulatora, podczas gdy krótkotrwałe wahania mocy wyjściowej są kompensowane za pomocą ultrakondensatora. Poza tym w schemacie sterowania zastosowano godzinową dyspozytornię mocy fotowoltaicznej, ponieważ w niniejszym opracowaniu uwzględniono system fotowoltaiczny podłączony do sieci. Oceny symulacyjne PV/HES z proponowanym schematem sterowania przeprowadzono w środowisku MATLAB/Simulink. Skuteczność proponowanego schematu kontroli zweryfikowano za pomocą kilku studiów przypadku. Początkowo schemat kontroli oceniano przy różnych początkowych poziomach SOC HES. Następnie schemat sterowania został oceniony przy użyciu pięciu dni rzeczywistej mocy wyjściowej systemu fotowoltaicznego w celu zweryfikowania niezawodności proponowanego schematu sterowania w rzeczywistych warunkach. Ogólnie rzecz biorąc, ocena symulacji została zweryfikowana, że proponowany schemat sterowania systemem PV/HES skutecznie łagodzi wahania mocy wyjściowej systemu fotowoltaicznego, a moc wyjściowa jest wysyłana do sieci energetycznej co godzinę. Ponadto był w stanie regulować SOC HES na limicie operacyjnym podczas całego procesu. Wyniki symulacji wykazały, że schemat sterowania skutecznie zmniejszył niedopuszczalne wahania mocy wyjściowej z 20% do mniej niż 1%. Wyniki pokazały również, że SOC HES był regulowany w zakresie odpowiednio 38%-75% i 42%-60% jego pojemności w trakcie procesu.
17
EN
The electrical energy from the sun can be extracted using solar photovoltaic (PV) modules. This energy can be maximized if the connected load resistance matches that of the PV panel. In search of the optimum matching between the PV and the load resistance, the maximum power point tracking (MPPT) technique offers considerable potential. This paper aims to show how the modelling process of an efficient PV system with a DC load can be achieved using an artificial neural network (ANN) controller. This is applied via an innovative methodology, which senses the irradiance and temperature of the PV panel and produces an optimal value of duty ration for the boost converter to obtain the MPPT. The coefficients of this controller have been refined based upon previous data sets using the irradiance and temperature. A gradient descent algorithm is employed to improve the parameters of the ANN controller to achieve an optimal response. The validity of the PV system using the MPPT technique based on the ANN controller is further demonstrated via a series of experimental tests at different ambient conditions. The simulation results show how the MPPT technique based on the ANN controller is more effective in maintaining the optimal power values compared with conventional techniques.
PL
Energia elektryczna ze słońca może być pozyskiwana za pomocą modułów fotowoltaicznych (PV). Energię tę można zmaksymalizować, jeśli rezystancja podłączonego obciążenia jest zgodna z rezystancją panelu fotowoltaicznego. W poszukiwaniu optymalnego dopasowania między PV a rezystancją obciążenia, technika śledzenia punktu maksymalnej mocy (MPPT) oferuje znaczny potencjał. Niniejszy artykuł ma na celu pokazanie, w jaki sposób można osiągnąć proces modelowania wydajnego systemu fotowoltaicznego z obciążeniem DC przy użyciu kontrolera sztucznej sieci neuronowej (ANN). Jest to stosowane za pomocą innowacyjnej metodologii, która wykrywa natężenie promieniowania i temperaturę panelu fotowoltaicznego i wytwarza optymalną wartość współczynnika wypełnienia dla konwertera doładowania w celu uzyskania MPPT. Współczynniki tego kontrolera zostały udoskonalone w oparciu o poprzednie zestawy danych z wykorzystaniem natężenia promieniowania i temperatury. Algorytm opadania gradientu jest wykorzystywany do poprawy parametrów kontrolera ANN w celu uzyskania optymalnej odpowiedzi. Ważność systemu fotowoltaicznego wykorzystującego technikę MPPT opartą na sterowniku ANN jest dalej demonstrowana w serii testów eksperymentalnych w różnych warunkach otoczenia. Wyniki symulacji pokazują, w jaki sposób technika MPPT oparta na sterowniku ANN skuteczniej utrzymuje optymalne wartości mocy w porównaniu z technikami konwencjonalnymi.
PL
W ostatnich latach fotowoltaika stała się główną siłą napędową rozwoju OZE w Polsce. Moc zainstalowana w źródłach generujących energię elektryczną z promieniowania słonecznego na koniec lipca 2022 r. wyniosła 10,6 GW. Regulacje stymulujące rozwój rynku OZE w Polsce, poprzez cele wyznaczone w Krajowym Planie na Rzecz Energii i Klimatu czy w unijnym planie „RePowerEU”, które determinowane są obecnymi wyzwaniami energetycznymi, klimatycznymi i polityczno-geograficznymi, każą optymistycznie patrzeć w przyszłość polskiego rynku fotowoltaiki.
EN
The use of phtovoltaic energy in water pumping is an economically viable and sustainable solution to rural communities without access to the electricity grid. The aim of this paper is to improve the performance of a phtovoltaic water pumping system by using a new converter structure based on three levels parallel multicell converter. This converter is controlled by two control loops, an external control based on the SMC and FLC MPPT algorithms and an internal control of the output branch current with the hybrid control based on the Petri nets. A comparative study between the boost converter and a three-levels parallel multicellular converter with the SMC and FLC MPPT has been made, which allows us to conclude that the new structure is more advantageous than the conventional structure especially. The boost gives rise to a wide band of strong power oscillations as well as the current and a voltage of PV, which translates into a high harmonic ratio with respect to the three-level parallel multicellular converter structure.
PL
Wykorzystanie energii fotowoltaicznej do pompowania wody jest ekonomicznie opłacalnym i zrównoważonym rozwiązaniem dla społeczności wiejskich bez dostępu do sieci elektrycznej. Celem tego artykułu jest poprawa wydajności fotowoltaicznego systemu pompowania wody poprzez zastosowanie nowej struktury konwertera opartej na trójpoziomowym równoległym konwerterze wieloogniwowym. Przetwornica ta jest sterowana przez dwie pętle sterowania, sterowanie zewnętrzne oparte na algorytmach SMC i FLC MPPT oraz sterowanie wewnętrzne prądu gałęzi wyjściowego ze sterowaniem hybrydowym opartym na sieciach Petriego. Przeprowadzono badanie porównawcze pomiędzy konwerterem boost a trójpoziomowym równoległym konwerterem wielokomórkowym z SMC i FLC MPPT, co pozwala stwierdzić, że nowa konstrukcja jest szczególnie korzystniejsza niż konstrukcja konwencjonalna. Wzmocnienie powoduje powstanie szerokiego pasma silnych oscylacji mocy oraz prądu i napięcia PV, co przekłada się na wysoki współczynnik harmonicznych w stosunku do trójpoziomowej równoległej struktury wielokomórkowej przetwornic.
20
Content available remote Particle swarm optimization algorithm for solar pv system under partial shading
EN
Conventional maximum power point tracking (MPPT) has several demits such as steady-state oscillation and the inability to distinguish between multipacks generated under partial shading conditions (PSC). This paper studies the compression between the conventional Perturb and Observe (P&O) algorithm and the Particle Swarm Optimization ( PSO) algorithm to track global peak (GP) . Matlab Simulink carried out under PSC, the result shows that the PSO algorithm is successful to capture GP with 98.6% efficiency and the P&O algorithm is failed to capture the GP.
PL
Konwencjonalne śledzenie punktu maksymalnej mocy (MPPT) ma kilka wad, takich jak oscylacja stanu ustalonego i niemożność rozróżnienia opakowań zbiorczych generowanych w warunkach częściowego zacienienia (PSC). Ten artykuł bada kompresję pomiędzy konwencjonalnym algorytmem Perturb and Observe (P&O) a algorytmem Particle Swarm Optimization (PSO) w celu śledzenia globalnego piku (GP). Matlab Simulink przeprowadzony w ramach PSC, wynik pokazuje, że algorytm PSO z powodzeniem wychwytuje GP z wydajnością 98,6%, a algorytm P&O nie jest w stanie wychwycić GP.
first rewind previous Strona / 6 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.