Ograniczanie wyników
Czasopisma help
Autorzy help
Lata help
Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 1146

Liczba wyników na stronie
first rewind previous Strona / 58 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  computer simulation
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 58 next fast forward last
EN
The article presents an analysis of the spatial dispersion of ammonia in the troposphere, emitted from the thermal treatment of sludge from the sewage treatment plant in Łódź. The study aimed to assess the impact of the emitter on the air quality in the nearby single-family housing estate. The results of field measurements of ammonia concentration were compared with computer simulations based on data measured at the emitter. Mobile measuring equipment mounted on a transport platform and an unmanned aerial vehicle was used to conduct field measurements, which were then subjected to analytical processing in ArcGis Pro software. Computer simulation of ammonia dispersion from two 25 m high chimneys was conducted in the OPA03 program. Both field measurements and simulation data showed a negligible impact of the emitter on the ammonia concentration in the air. This is primarily due to the low concentration of emitted ammonia at the chimney outlet and the emitter's location relative to the buildings, considering the dominant wind directions. Field studies have shown that the emission of ammonia in the analyzed area may be to a greater extent caused by the sewage collection station from sewage disposal vehicles and the composting plant, which are located close to the analyzed emitter and the residential area.
PL
W artykule przedstawiono analizę zacienienia ulicy z drzewami jako elementami osłony przeciwsłonecznej na przykładzie koncepcji zielonej rewitalizacji ulicy 1 Maja w Płocku. W opracowaniu dokonano również analizy obowiązujących regulacji prawnych w zakresie lokalizacji nasadzeń w prasie drogowym.
EN
The article presents an analysis of the shading of the street with trees as elements of sunshade on the example of the concept of green revitalization of 1 Maja Street in Plock. The paper also analyzes the current legal regulations on the location of plantings in the road press.
3
Content available Journal bearings of multilobe profiles
EN
This article considers the static characteristics of multilobe, classic journal bearings as well as the multilobe bearings with the lobes of different geometry. For obtaining of these characteristics the equations of Reynolds, energy and viscosity as well as the geometry of oil film have to be solved numerically by means of finite differences method. The assumptions that are usually applied concern the laminar, adiabatic oil film, and parallel orientation of the axes of journal and sleeve and the conditions of the static equilibrium positions of journal.
PL
W artykule przedstawiono charakterystyki statyczne klasycznych łożysk wielopowierzchniowych, jak również łożysk wielopowierzchniowych z segmentami o różnej geometrii. Charakterystyki otrzymano z równań Reynoldsa, energii i lepkości, oraz geometrii filmu smarowego - zastosowano rozwiązanie numeryczne metodą różnic skończonych. Założono laminarny, adiabatyczny film smarowy, równoległe położenie osi czopa i panewki oraz warunki statycznego położenia równowagi czopa.
EN
Shaping the systems of material layers of external partitions and joints of buildings insulated from the internal ones should not be random, but developed on the basis of detailed calculations and analyzes of physical parameters, taking into account heat flow in a two-dimensional (2D) field. The article presents an analysis of the physical parameters of the joints of the partitions of a building insulated from the inside in the case of various material systems.
PL
Kształtowanie układów warstw materiałowych przegród zewnętrznych i złączy budynków ocieplonych od wewnątrz nie powinno być przypadkowe, lecz opracowane na podstawie szczegółowych obliczeń i analiz parametrów fizykalnych z uwzględnieniem przepływu ciepła w polu dwuwymiarowym (2D). W artykule przedstawiono analizę parametrów fizykalnych złączy przegród budynku ocieplonego od wewnątrz w przypadku różnych układów materiałowych.
EN
This article examines the utilization of computer simulation techniques for optimizing warehouse locations, an essential component of efficient supply chain management. The study employs a detailed simulation model built using FlexSim software to analyze various decision-making scenarios and identify the optimal warehouse locations while considering market demand for different products. The model integrates a finite set of decision variables and constraints specific to the logistics problem, offering a structured approach to evaluate alternative strategies. Key stages in the development of the simulation model are outlined, including the definition of input parameters, the execution of simulations, and the interpretation of results. The findings demonstrate that virtual simulation modeling significantly enhances decision-making processes by providing precise insights into the interactions within the distribution network. Additionally, the use of simulation results in considerable time and cost savings by reducing the need for costly physical trials. This research underscores the effectiveness of computer simulation in optimizing warehouse locations, contributing to improved supply chain performance and operational efficiency.
EN
This work analyzes the sensitivity functions and optimum control of a transport and logistics process model. It explains the fundamental model of controlling safe ship movement as a differential game, and optimizing control algorithms through multi-matrix game and multi-stage positioning game. The sensitivity features for controlling safe ship in actual collision scenario are described in relation to inaccurate information of process position and variations in its varables, based on the determination of computer simulation algorithms in Matlab/Simulink software.
7
Content available Wieloskalowa analiza kompozytów cementowych
PL
Niniejsza praca jest poświęcona modelowaniu wieloskalowemu kompozytów cementowych. Konieczność takiego podejścia wynika ze złożonej i niejednorodnej struktury wewnętrznej tych materiałów. W pracy opracowano model wieloskalowy kompozytu cementowego oraz przedstawiono wyniki symulacji komputerowych dla przyjętych parametrów mikrostruktury kompozytu, co pozwala na dokładniejszą analizę jego właściwości mechanicznych i strukturalnych. Słowa kluczowe: modelowanie wieloskalowe, analiza niejednorodności struktury kompozytu cementowego, symulacje komputerowe.
EN
This paper is devoted to multiscale modeling of cement composites. The rationale for adopting this approach stems from the heterogeneous complex internal structure of the composite. A multiscale model of the composite was developed and the results of computer simulations for the adopted parameters of the microstructure of the composite were presented, enabling a more detailed analysis of its mechanical and structural properties.
EN
The article was devoted to the use of selected tools to decide on the choice of internal transport technology. Technology is understood as the degree of mechanization of internal transport means. For this purpose, the characteristics of internal transport and technology were discussed, and then the factors and criteria that should be considered when choosing internal transport technology were presented. On this basis, an algorithm for the selection of internal transport technology was presented and discussed, and simulation studies were carried out using the FlexSim program. The aim of the article was to analyze and evaluate the possibility of using simulation software to support decision-making regarding the selection of internal transport technologies in a warehouse. The following working hypothesis was adopted - the use of simulation software supports the decision-making process by indicating the most effective solution for implementing transport technology in the warehouse. The research problem was: Is it possible to support the decision-making process regarding the selection of transport technology using simulation software? The last step describes the results of the computer simulation and presents the conclusions. The developed algorithm and its practical implementation can be used by warehouse designers to cost-free check their solutions and selected storage and transport technologies.
PL
Artykuł został poświęcony wykorzystaniu wybranych narzędzi do podjęcia decyzji o wyborze technologii transportu wewnętrznego. Technologia rozumiana jest jako stopień mechanizacji środków transportu wewnętrznego. W tym celu omówiono charakterystykę transportu wewnętrznego i technologii, a następnie przedstawiono czynniki i kryteria, które powinny być brane pod uwagę przy wyborze technologii transportu wewnętrznego. Na tej podstawie przedstawiono i omówiono algorytm doboru technologii transportu wewnętrznego oraz przeprowadzono badania symulacyjne z wykorzystaniem programu FlexSim. Celem artykułu była analiza i ocena możliwości wykorzystania oprogramowania symulacyjnego do wspomagania podejmowania decyzji w zakresie doboru technologii transportu wewnętrznego w magazynie. Przyjęto następującą hipotezę roboczą - wykorzystanie oprogramowania symulacyjnego wspomaga proces decyzyjny poprzez wskazanie najbardziej efektywnego rozwiązania wdrożenia technologii transportu w magazynie. Problem badawczy brzmiał: Czy możliwe jest wspomaganie procesu decyzyjnego w zakresie wyboru technologii transportu z wykorzystaniem oprogramowania symulacyjnego? W ostatnim kroku opisano wyniki symulacji komputerowej i przedstawiono wnioski. Opracowany algorytm i jego praktyczna implementacja może być wykorzystana przez projektantów magazynów do bezkosztowego sprawdzenia swoich rozwiązań i wybranych technologii magazynowania i transportu.
EN
This article presents the task of safely guiding a ship, taking into account the movement of many other marine units. An optimally neural modified algorithm for determining a safe trajectory is presented. The possible shapes of the domains assigned to other ships as traffic restrictions for the particular ship were subjected to a detailed analysis. The codes for the computer program Neuro-Constraints for generating these domains are presented. The results of the simulation tests of the algorithm for a navigational situation are presented. The safe trajectories of the ship were compared at different distances, changing the sailing conditions and ship sizes.
EN
The article presents the optimization of supply chain management in a foundry using computer simulation with the FlexSim program. The authors analyze collaboration with external entities in the production process, focusing on the settlement of raw materials, transportation services, and storage costs. Special attention is given to the production plans of subcontractors integrated into the operational production schedule. Utilizing the 3D FlexSim environment, they showcase a simulation model optimized for minimizing the costs of production, transportation, and storage of alloying elements essential for iron casting production. The case study illustrates the effective use of computer simulation in refining supply chain management within the context of the foundry production process.
11
Content available remote Symulacje komputerowe brykietowania szlamów konwertorowych w prasie walcowej
PL
Badania symulacyjne brykietowania w prasie walcowej wykonano metodą cienkich przekrojów (slab method) wg modelu matematycznego M. Hryniewicza. Symulacje przeprowadzono dla dwóch pras o średnicy walców ø 500 i 1000 mm. Wymagane dane wejściowe do modelu uzyskano eksperymentalnie. Doświadczalnie dobrano: skład mieszanki (szlam konwertorowy 66%, wapno palone 13%, koksik 13%, melasa 8%), wilgotność nadawy (8-11,7%) oraz korzystną konfigurację układu roboczego prasy i parametry procesu. Trwałe brykiety uzyskano przy nacisku jednostkowym 20-45 MPa oraz odpowiedniej szerokości szczeliny między walcami i objętości brykietu wynoszących s = 1 i 2 mm oraz V = 10-13 i 50-85 cm³ dla prasy o średnicy walców odpowiednio ø 500 i 1000 mm. Weryfikacja eksperymentalna wyników symulacji komputerowych potwierdziła, że zastosowany model matematyczny poprawnie odwzorowuje rzeczywistą sytuację fizyczną.
EN
Slab method math. model was used for computer simulation of briquetting in roll press of BOF sludge (66%) mixed with burnt lime (13%), coke (13%) and molasses (8%). Simulations were carried out for two presses with roll diams. of ø 500 mm and ø 1000 mm. The required input data for the model were obtained exptl. The feed moisture for briquetting was 8-11,7%. The durable briquettes were obtained with a unit pressure of 20-45 MPa, an appropriate width of the gap between the rollers and the vol. of the briquette. Computer simulations results were verified and confirmed in the laboratory tests done on roll press of ø 450 mm rolls diameter.
12
Content available remote Wpływ warstwy ZnO na parametry pracy azotkowych laserów o emisji krawędziowej
PL
W pracy przedstawiono wyniki numerycznej analizy laserów krawędziowych na bazie azotku galu. Emiter został zaprojektowany do pracy w temperaturze pokojowej i ciągłej emisji światła zielonego (540 nm). Pokazano, że zastosowanie warstwy ZnO, jako ograniczenie optyczne po stronie p, w porównaniu z warstwą ITO, pozwala polepszyć parametry pracy lasera w połączeniu z innymi warstwami zapewniającymi efektywne ograniczenie modu od strony n. Wynika to między innymi ze znacznie niższej wartości współczynnika absorpcji materiału ZnO oraz z lepszej przewodności cieplnej ZnO w porównaniu do ITO.
EN
The paper presents the results of the numerical analysis of edge-emitting lasers based on gallium nitride. The emitter was designed for operation at room temperature and continuous emission of green light (540 nm). It is shown that the use of a ZnO layer as a p-type optical confinement, compared to an ITO layer, allows improved laser operating parameters in combination with other layers providing optical confinement on the n-side. This is due to the significantly lower value of the absorption coefficient of the ZnO material and the much better thermal conductivity of ZnO compared to ITO.
13
Content available remote Modelowanie i pomiary elektroniczne wybranych bioukładów człowieka
PL
Modelowanie i symulacja komputerowa są obecnie powszechnie stosowanymi metodami badawczymi w wielu dziedzinach nauki, również w opisie bioukładów rozumianych jako układy ruchu obiektów biologicznych, w których opisie, analizie pracy i pomiarach należy uwzględnić silny wpływ układu nerwowego. W artykule przedstawiono metody i urządzenia pomiarowe do badania wybranych bioukładów człowieka. Zwrócono uwagę na silną zależność pomiędzy badaniami obiektów biologicznych a modelami matematycznymi, symulacyjnymi, które opisują zachowanie rzeczywistego układu biologicznego.
EN
Computer simulation and modelling are widespread scientific methods used in many fields of science as well as in descriptions of biosystems understood as systems of movement of biological objects whose description, work analysis and measurements have to take into consideration strong influence of nervous system. This article presents methods and measuring devices which can be used to research selected human biosystems. The Article highlights strong connection between research of biological objects and mathematic models, simulations, which describe the behaviour of a real biological system.
PL
W niniejszej pracy przedstawiono budowę i zasadę działania przeciwpancernego pocisku kierowanego Pirat z funkcją „top attack”. Pocisk przeszedł pomyślnie testy na stanowisku laboratoryjnym oraz testy poligonowe. Przedstawiono również wyniki badań symulacyjnych lotu pocisku Pirat, które porównano z wynikami badań poligonowych. Badania symulacyjne przeprowadzono w oparciu o opracowany model matematyczno-fizyczny pocisku. Uzyskane wyniki potwierdzają poprawność założeń i charakterystyk przyjętych w modelu symulacyjnym.
EN
The paper presents the structure and principle of operation of the PIRAT anti-tank guided missile (ATGM) with the „top attack” function. PIRAT is a light anti-tank missile guided to the target using Semi-Active Laser Homing (SALH) method. A system maximum range is 2500 m. The missile has successfully passed laboratory and field tests. The results of the PIRAT missile flight simulation tests have been presented and compared with the results of field tests. The simulation tests were carried out on the basis of the created mathematical and physical models of the missile. The obtained results confirm the correctness of the assumptions and characteristics adopted for the simulation model. A distance between a missile launcher and a target during field test, presented in the paper, was 2400 m. Missile behaviour in flight was consistent with the simulation results, what is shown in figures 9, 10, and 11. The velocity of the projectile throughout the flight was sufficient to provide adequate control force. The velocity vector of the projectile at the moment of impact with the target is inclined to the horizontal plane at an angle of -26ᵒ. Approximately 0.2 s before missile hitting the target, an inclination angle of the projectile body was -35ᵒ. This is due to high value of control command signal developed by the autopilot at that moment. In the actual moment of missile hitting, the target value of control command signal was low causing a change of an inclination angle of the projectile body up to the value of -23ᵒ. It is advisable to modify the PIRAT’s missile control algorithm to increase an inclination angle of the velocity vector at the moment of missile hitting the target, as well as to increase an angle of inclination of the missile body when it hits the target.
PL
Proces kompostowania jest powszechnie stosowany w gospodarce odpadami jako metoda przekształcania lub stabilizacji odpadów organicznych. Ze względu na złożony, nieliniowy charakter zachodzących w nim zjawisk biologicznych oraz fizykochemicznych, jest on stosunkowo trudny z punktu widzenia predykcji oraz sterowania. Sterowanie procesem ma tu na celu uzyskiwanie w określonym horyzoncie czasowym produktu finalnego, czyli zwykle kompostu spełniającego określone wymagania jakościowe. W artykule zaprezentowano prosty model matematyczny procesu kompostowania z wymuszonym napowietrzaniem, potencjalnie umożliwiającym realizację wspomnianego celu sterowania. Opracowano model drugiego rzędu, z dwiema wielkościami wejściowymi reprezentującymi zewnętrzne oddziaływania na proces. Na podstawie modelu matematycznego przekształconego do postaci równań stanu, zbudowano w środowisku MATLAB/Simulink model komputerowy bioreaktora, który następnie wykorzystano do przeprowadzenia badań symulacyjnych. Pokazano, że możliwe jest oddziaływanie na proces za pomocą wymuszonego napowietrzania, bezpośrednio wpływającego na zmianę temperatury w bioreaktorze, a w konsekwencji również na czas otrzymania końcowego produktu reakcji. Wyniki analizy właściwości dynamicznych procesu, przeprowadzonej z wykorzystaniem modelu zlinearyzowanego wzdłuż wybranej, nominalnej trajektorii stanu, wskazują na zmienny charakter jego stabilności - począwszy od niestabilności w początkowych fazach reakcji, przez stabilizację w fazie pośredniej, aż do stabilności asymptotycznej, zakończonej osiągnięciem stanu równowagi.
EN
The composting process is commonly used in waste management as a method of converting or stabilizing organic waste. Due to the complex, non-linear nature of biological and physicochemical phenomena involved, this process is relatively difficult to predict and control. The control is usually aimed at obtaining the final product, that is, the compost that meets legal standards. The article presents a simple mathematical model of the composting process with forced aeration, which will potentially facilitate the control task. A second order model was developed, with two inputs signals. Based on the mathematical model in the form of the state equations, the computer model of the bioreactor was built in the MATLAB/Simulink environment, which was then used to conduct different simulation tests. It was shown that it is possible to control the process using forced aeration, directly influencing the temperature changes in the bioreactor, and consequently also the time of obtaining the final product of the reaction. The analysis of the dynamic properties of the process performed using its model linearized about some nominal state trajectory shows the changes in its internal stability - starting from the unstable character in the initial phases of the reaction, through stabilization in its intermediate phase, up to the asymptotic stability, ending in the stable equilibrium state.
EN
The occurrence of a disaster and the appearance of a new product are items of news that can reach many people rapidly. Decision-makers would like to know how many individuals will obtain such information. In this paper, we study the case in which there are spreaders who think that the news is true and others that claim it is false. We simulate the propagation of a rumour and propose an algorithm for estimating the parameters of the resulting dynamical system. The relation between the parameters defining the simulation and the dynamical system is also studied. We conclude that the simulation describes the phenomenon well, in particular when the method proposed in this paper is used to estimate the parameters.
EN
Electron beam treatment technologies should be versatile in the removal of chlorofl uorocarbons (CFCs) owing to their exceptional cross sections for the thermal electrons generated in the radiolysis of air. Humidity, dose rates, O2 concentration, and CFC concentration infl uence the effi ciency of the destruction process under electron beam treatment. Computer simulations have been used to theoretically demonstrate the destruction of chlorotrifl uoromethane (CF3Cl), dichlorodifl uoromethane (CF2Cl2), and trichlorofl uoromethane (CFCl3) in the air (N2 + O2: 80% + 20%) in room temperature up to a dose of 13 kGy. Under these conditions, it is predicted that the removal effi ciency is in the order CF3Cl (0.1%) < CF2Cl2 (7%) < CFCl3 (34%), which shows the dependence of the process on the number of substituted Cl atoms. Dissociative electron attachment with the release of Cl– is the primary process initiating the destruction of CFCs from the air stream. Reactions with the first excited state of oxygen, namely, O(1 D), and charge-transfer reactions further promote the degradation process. The degradation products can be further degraded to CO2, Cl2, and F2 by prolonged radiation treatment. Other predicted products can also be removed through chemical processes.
PL
Kształtowanie układów warstw materiałowych przegród zewnętrznych i złączy budynku o niskim zużyciu energii nie powinno być przypadkowe, lecz opracowane na podstawie szczegółowych obliczeń i analiz parametrów fizycznych z uwzględnieniem przepływu ciepła w polu dwuwymiarowym (2D). W artykule przedstawiono autorski algorytm kształtowania układu materiałowego przegród zewnętrznych i ich złączy w aspekcie cieplno-wilgotnościowym oraz analizę parametrów fizycznych połączenia ściany zewnętrznej ze stropem w przypadku rożnych układów materiałowych.
EN
Shaping the material layers of the building envelope and joints with low energy consumption should not be accidental, but based on detailed calculations and analyzes of physical parameters, taking into account heat flow in a two-dimensional (2D) field. The article presents an original algorithm for shaping the material arrangement of external partitions and their joints in terms of heat and humidity, as well as an analysis of the physical parameters of the connection of the external wall with the ceiling with different material arrangements.
PL
W artykule przedstawiono symulacje numeryczne CFD oddziaływania wiatru na dachy budynków jednokondygnacyjnych. Przeprowadzono obliczenia komputerowe, na podstawie których określono rozkład ciśnienia wiatru na połaciach dachu oraz wartości sił obciążających górne krawędzie ścian budynku. Pod uwagę wzięto 9 klas wiatru (klasyfikacja z uwagi na prędkość wiatru, od wiatru gwałtownego do huraganu dewastującego). Rozpatrzono dachy jedno-, dwu- i czterospadowe. Wzięto pod uwagę różne kierunki działania wiatru. Analizę wykonano z wykorzystaniem modeli komputerowych bazujących na metodzie elementów skończonych i symulacjach numerycznych CFD. Obliczenia przeprowadzono na przykładzie budynku o wymiarach w rzucie 14x7 m.
EN
This paper presents CFD numerical simulations of wind load on the roofs of single-storey buildings. Computer calculations were carried out. Based on these, the pressure distribution on the roof surface and the distribution of forces on the upper edges of the building walls were determined. For this purpose the nine wind classes were used - classification according to wind speed (from violent wind to devastating hurricane). Single, double and hipped roofs were considered. Different wind directions were taken into account. The computational analyses were carried out using computer models based on the finite element method and CFD numerical simulations. The calculations were carried out on the example of a building with dimensions of 14x7 m in plan.
20
Content available remote Water hummer in fluid networks
EN
The article discusses the problem of water hammer in fluid networks (gas, water supply and in pipelines transporting two-phase fluids. Mathematical models and selected computational algorithms are given.
PL
W artykule omówiono problem uderzenia hydraulicznego w sieciach płynowych (gazowych, wodociągowych oraz w rurociągach transportujących płyny dwufazowe. Podano modele matematyczne oraz wybrane algorytmy obliczeniowe.
first rewind previous Strona / 58 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.