Ograniczanie wyników
Czasopisma help
Autorzy help
Lata help
Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 124

Liczba wyników na stronie
first rewind previous Strona / 7 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  wełna mineralna
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 7 next fast forward last
PL
W artykule zaprezentowano badanie dotyczące odporności ogniowej uszczelnień przejść instalacyjnych stalowych rur o trzech różnych średnicach (od 60,3 do 168,3 mm), zabezpieczonych jednym rodzajem wełny mineralnej w różnych konfiguracjach grubości oraz długości izolacji. Wszystkie z przebadanych próbek zachowały szczelność ogniową przez 240 min. Izolacyjność ogniowa zmieniała się w zależności od średnicy rury oraz wymiarów zastosowanej izolacji. Analiza uzyskanych wyników badań wykazała, że długość zastosowanej izolacji wpływa przede wszystkim na przyrost temperatury mierzonej na rurze, natomiast grubość izolacji jest kluczowym czynnikiem wpływającym na przyrost temperatury rejestrowany na powierzchni wełny mineralnej.
EN
In this article presented fire resistance test of penetrations of steel pipes with three different diameters (ranging from 60.3 mm to 168.3 mm) protected by a single type of mineral wool in various configurations of insulation thickness and length was conducted. The tested samples maintained their fire integrity for 240 minutes. The fire insulation varied depending on the pipe diameter and the dimensions of the insulation used. An analysis of the results showed that the length of the insulation primarily affected the temperature rise measured on the pipe, while the thickness of the insulation was a key factor influencing the temperature rise recorded on the surface of the mineral wool.
PL
Celem badań była analiza emisji pyłów z reprezentatywnych wyrobów izolacyjnych dostępnych na rynku w warunkach ich montażu na ścianę. Badania wykonano za pomocą laserowego i optycznego licznika cząstek. Prace badawcze prowadzono w dwóch etapach (metoda in situ i metoda komorowa). Artykuł przedstawia wyniki etapu pierwszego, tj. oceny stężenia pyłu wykonanej podczas kolejnych etapów montażu izolacji (styropianu i wełny mineralnej) w specjalnie zaprojektowanych warunkach laboratoryjnych.
EN
The aim of research was to investigate the issue of dust emissions from representative insulation products available on the market under their application. The tests were performed using a laser and optical particle counter. The research work was carried out in two stages (in situ method and chamber method). The article presents the results of the first stage, i.e. the assessment of dust concentrations performed during various phases of installation of insulation (polystyrene and mineral wool) in special laboratory conditions.
3
Content available remote Wybrane aspekty badania niepalności wełny mineralnej
4
Content available remote Wpływ gęstości wełny mineralnej na izolacyjność w warunkach pożarowych
PL
W artykule przedstawiono wyniki badań laboratoryjnych wpływu dziesięciu typów skalnej wełny mineralnej o różnej gęstości na zdolność izolowania oddziaływań termicznych wywołanych pożarem. Gęstość badanej wełny mineralnej wynosiła 28 - 170 kg/m3, a grubość 50, 100, 150 i 200 mm. Badania potwierdziły, że istnieje zależność pomiędzy zdolnością do izolowania przed temperaturą pożarową a gęstością wełny mineralnej, przy czym zaobserwowano, że w wielu przypadkach wystarczy zastosowanie wełny mineralnej o małej gęstości i odpowiedniej grubości, aby uzyskać oczekiwany poziom bezpieczeństwa pożarowego przegrody.
EN
The paper presents the results of laboratory tests for 10 types of rock mineral wool with different density in the field of fire temperature insulation. The results include densities from 28 to 170 kg/m3, and thicknesses of mineral wool of 50, 100, 150 and 200 mm. The tests confirmed the dependence of the density of mineral wool on the effectiveness of insulating fire temperatures, and it has been observed that in many cases it is enough to use mineral wool with a lower density and proper layer thickness to obtain the expected fire safety level of the partition.
5
Content available remote Bezpieczeństwo pożarowe budynków drewnianych
PL
W artykule poruszono kwestię bezpieczeństwa pożarowego domów drewnianych. Omówiono właściwości wełny mineralnej jako materiału do izolacji. Przedstawiono wymogi prawne dotyczące bezpieczeństwa pożarowego budynków.
EN
The article deals with the issue of fire safety of wooden houses. The properties of mineral wool as an insulation material are discussed. Legal requirements for fire safety of buildings are presented.
EN
The article presents the results of research on the acoustic properties of materials used as sound-absorbing linings and cores in baffles of anti-noise protection. Using an impedance tube the spectral characteristics of the normal incidence sound absorption and sound transmission loss indices of 12 specimens of mineral wool with different density and thickness were determined. From these characteristics, the single-number weighted sound absorption coefficient αw and the sound reduction index Rw were calculated. To calculate the value of the Rw index on the basis of surface mass of the mineral wool specimen, a new formula was proposed. The insertion loss of an acoustic enclosure with one, two and three-layer walls with dimensions of 0.7×0.7 m, containing mineral wool, was determined. The best efficiency was achieved for the enclosure made of walls of layers: mineral wool, placed on the sound source side, steel plate and aluminium plate.
PL
W celu określenia wpływu wzajemnego połączenia zróżnicowanych izolacji cieplnych w systmie ETICS na stan ochrony cieplno-wilgotnościowej zrealizowano badania w skali laboratoryjnej.
EN
In order to determine the influence of the mutual connection of different thermal insulations in the ETICS system on the condition of thermal and humidity protection, laboratory scale tests were carried out.
PL
W artykule przedstawiono zagrożenia pożarowe oraz sposób ich eliminacji w przypadku elewacji wentylowanych wykorzystujących rozwiązania charakteryzujące się dobrą izolacyjnością termiczną przegrody. Omówiono problematykę stosowania wełny mineralnej o małej gęstości oraz konsoli eliminujących występowanie mostków termicznych w kontekście spełnienia § 225 Warunków Technicznych.
EN
The paper presents fire hazards and the method of their elimination in the case of ventilated facades using solutions with good thermal insulation of the partition. The issues of using low-density mineral wool and passive brackets eliminating the occurrence of thermal bridges in the context of meeting § 225 of the technical requirements are discussed.
PL
W artykule przedstawiono wyniki obliczeń numerycznych ścian zewnętrznych ocieplonych styropianem z dodatkową barierą ogniową w postaci wełny mineralnej. Założono dwa rodzaje warstwy konstrukcyjnej, wykonanej w postaci monolitycznej żelbetowej i z bloczków z autoklawizowanego betonu komórkowego. W wyniku obliczeń otrzymano rozkłady temperatury w przekroju ściany, z wyznaczeniem charakterystycznych wartości w miejscach szczególnych. Dla przyjętych założeń wykazano nieznaczne zróżnicowanie temperatury na wewnętrznej powierzchni ściany oraz duże wartości czynnika temperaturowego fRsi.
EN
The article presents the results of numerical calculations of external walls insulated with polystyrene with an additional fire barrier in the form of mineral wool. Two types of construction layer were established, made of monolithic reinforced concrete and autoclaved aerated concrete blocks.As a result of the calculations, temperature distributions in the cross-section of the wall were obtained, with their characteristic values in specific places. For the assumptions made, a slight temperature variation on the inner surface of the wall and high values of the temperature factor fRsi were demonstrated.
10
Content available remote Odporność na uderzenie ETICS z wełną mineralną i okładziną nieciągłą
PL
W artykule zaprezentowano wyniki badania odporności na uderzenie systemu ociepleń ETICS z wełną mineralną lamelową (TR80) oraz zwykłą (TR10). Okładzinę stanowiły płytki klinkierowe oraz płytki cięte z cegieł ceramicznych. Badania przeprowadzono po cyklach hydrotermicznych oraz zamrażania-rozmrażania. Zastosowano nowe podejście do badania odporności na uderzenie z użyciem ciał twardych i miękkich. Na podstawie uzyskanych wyników testowane rozwiązania sklasyfikowano w najwyższej I kategorii użytkowania. Nie zaobserwowano wpływu rodzaju materiału termoizolacyjnego ani rodzaju płytek okładzinowych na rozpatrywaną właściwość.
EN
The paper presents the results of the impact resistance tests of ETICS made with the use of lamella (TR80) and regular (TR10) mineral wool. The cladding was made of clinker tiles and tiles cut from ceramic bricks. The tests were carried out after hydro-thermal and freeze-thaw cycles. A new approach was used to test the impact resistance with the use of hard and soft bodies. Based on the results, the tested solutions were classified in the highest category I of use. No influence of the type of thermal insulation material or the type of cladding tiles on the considered property was observed.
11
Content available remote Klej poliuretanowy do mocowania wełny mineralnej w systemie ETICS
PL
Stosowanie klejów poliuretanowych w ETICS ograniczone jest obecnie, w świetle wytycznych udzielania europejskich ocen technicznych, do mocowania płyt z EPS. W artykule zapisano próbę oceny użyteczności kleju poliuretanowego do systemu ETICS z lamelową wełną mineralną, z uwzględnieniem podłoży mineralnych oraz drewnianej konstrukcji szkieletowej. Wykonano badania przyczepności, które uzupełniono analizą SEM struktury kleju. Analizę przeprowadzono z uwzględnieniem wpływu rodzaju podłoża oraz warunków cieplno-wilgotnościowych. Uzyskane wyniki badań stanowią przesłankę dla pozytywnej oceny użyteczności budowlanej kleju poliuretanowego jako komponentu ETICS z wełną mineralną.
EN
In the light of the European Assessment Documents the use of polyurethane adhesives in ETICS is currently limited to fixing only EPS. In this study, we evaluate the usability of the polyurethane adhesive for ETICS with lamella mineral wool, intended for thermal insulation of walls made of concrete or masonry elements, as well as with a timber frame structure. Band strength tests were carried out, supplemented by SEM analysis of the adhesive structure. The analysis was carried out taking into account the influence of the type of substrate and the temperature and humidity conditions. The research results obtained in the work constitute a premise for a positive assessment of the construction usability of polyurethane adhesive as a component of ETICS with mineral wool.
PL
W artykule przedstawiona została ocena skuteczności izolowania temperatur pożarowych przez wełnę mineralną na podstawie jej gęstości oraz grubości izolacji. Na potrzeby badań w warunkach pożarowych przeprowadzono eksperyment, w którym badaniu poddano dziewięć rodzajów skalnej wełny mineralnej o różnej deklarowanej gęstości.
EN
The article presents the assessment of the effectiveness of fire temperatures isolation by mineral wool on the basis of its density and thickness of the insulation. For the purpose of testing in fire conditions, an experiment was carried out in which nine types of rock mineral wool with different declared density were tested.
13
Content available remote Prawidłowy układ warstw w dachu stromym z zastosowaniem wełny mineralnej
PL
Najpopularniejszym typem konstrukcji dachów domów jednorodzinnych w Polsce jest dach skośny. Wybór tego rozwiązania podyktowany jest zarówno walorami estetycznymi, jak i regulacjami prawnymi dotyczącymi warunków zabudowy na danym obszarze. Dach typu skośnego, w zależności od jego przeznaczenia, może dawać możliwości zagospodarowania przestrzeni na poddaszu na funkcjonalne pomieszczenia lub – w przypadku mniejszej wysokości – wykorzystania przestrzeni na strych. Konstrukcja dachu musi spełniać wszystkie standardy i wymagania dla zewnętrznych przegród budowlanych pod kątem izolacyjności cieplnej, nośności i stateczności konstrukcji, ochrony przeciwpożarowej i szczelności.
PL
W artykule przedstawiono wybrane wyniki pomiarów rozkładu temperatury w ścianie zewnętrznej ocieplonej systemem ETICS, w której zastosowano izolację termiczną w postaci styropianu z dodatkowym poziomym pasem wełny mineralnej. Badania prowadzono w warunkach laboratoryjnych przy oddziaływaniu wysokiej symulowanej temperatury powietrza zewnętrznego, stanowiącej istotne zagadnienie związane z ochroną cieplną budynków w okresie letnim.
EN
The article presents selected results of measurements of temperature distribution in an external wall insulated with the ETICS system, in which thermal insulation in the form of polystyrene with an additional horizontal strip of mineral wool was used. The tests were carried out in laboratory conditions under the influence of high simulated outside air temperature, which is an important issue related to thermal protection of buildings in the summer.
EN
Water retention in soil plays a key role in the context of water scarcity connected with climate change. Under the conditions of the laboratory experiment, the effect of the addition of mineral wool from crops grown under cover and municipal sewage sludge on the water retention and heavy metal (Pb, Zn, and Cd) leaching performance of the medium soil was evaluated. Sewage sludge and mineral wool, widely applied in a range of soil reclamation technologies, were found to have a beneficial and diversified impact on the soil water properties and heavy metal mobility.
PL
Oceniano wpływ nawozowej (10 Mg/ha) i melioracyjnej (100 Mg/ha) dawki osadu ściekowego oraz poużytkowej wełny mineralnej, zastosowanych do nawożenia gleby lekkiej, na zawartość ogólną i form specjacyjnych ołowiu, miedzi i cynku. Wprowadzenie do gleby lekkiej ocenianych odpadów wpłynęło na zwiększenie zawartości Pb, Cu i Zn w stosunku do kontroli, ale nie spowodowało przekroczenia ich dopuszczalnych zawartości w glebie. Zastosowanie melioracyjnej dawki osadu ściekowego nie stworzyło zagrożenia dla środowiska glebowego ze strony metali ciężkich. Największy udział w całkowitej zawartości ocenianych metali stanowiła frakcja rezydualna (FV), następnie formy Pb związane z materią organiczną oraz formy Cu i Zn związane z wolnymi tlenkami Fe i Al. Osad ściekowy zastosowany samodzielnie i z dodatkiem wełny mineralnej wpłynął na zmniejszenie mobilności ocenianych metali ciężkich.
EN
Eight expts. were carried out in pots filled with light soil and addn. of fertilizing agents, such as NPK fertilizer, sewage sludge and waste mineral wool, used sep. or together. Soil samples were taken for 3 growing seasons and the total Pb, Zn and Cu content as well as their speciation forms were detd. The sewage sludge and its mixts. with waste mineral wool increased the content of Pb, Cu and Zn in relation to the control, but did not result in exceeding the permissible levels in the soil.
18
Content available remote Właściwości modyfikowanego szkła amfibolitowego
PL
W ramach pracy przedstawiono właściwości szkieł amfibolitowych otrzymanych w wyniku stopienia amfibolitu i dodatków modyfikujących: dolomitu i opakowaniowej stłuczki szklanej. Obydwa surowce naturalne: amfibolit i dolomit, pochodziły z rejonów Dolnego Śląska. W celu określenia zdolności krystalizacyjnej uzyskanych szkieł przeprowadzono proces kierowanej krystalizacji. W pracy określono właściwości uzyskanych próbek szkieł przed i po procesie krystalizacji, wykorzystując rentgenowską analizę fazową oraz badania mikrostrukturalne. Oceniając wpływ składu surowcowego na lepkość, wyznaczono temperatury uzyskania przez szkła określonych wartości lepkości formowania. Wyznaczono też moduł kwasowości będący wraz z lepkością podstawowym parametrem procesu wytwarzania włókien. Na podstawie uzyskanych wyników stwierdzono, że właściwości otrzymanych szkieł zależą od udziału zastosowanych surowców modyfikujących: dolomitu i stłuczki szklanej. Uzyskane wartości współczynnika kwasowości wskazały, że modyfikacja składu szkła afibolitowego dodatkiem stłuczki szklanej korzystnie wpływa na jego właściwości z punktu widzenia wytwarzania włókien mineralnych.
EN
The work presents the properties of amphibolite glasses obtained by melting amphibolite and modifying additives: dolomite and packaging glass cullet. Both natural raw materials: amphibolite and dolomite, came from the regions of Lower Silesia. To determine the crystallization ability of the glasses obtained, a directed crystallization process was carried out. The work specifies the properties of the obtained glass samples before and after the crystallization process, using X-ray phase analysis and microstructure tests. By assessing the influence of the raw material composition on the viscosity, the temperatures of obtaining specific values of the forming viscosity by the glass were determined. The acidity modulus was also determined, which, together with the viscosity, is the basic parameter of the fibre production process. Based on the obtained results, it was found that the properties of the glasses obtained depend on the content of the modifying materials used: dolomite and glass cullet. The obtained values of the acidity modulus indicated that the modification of the composition of the amphibolite glass with the addition of glass cullet positively influences its properties in terms of the production of mineral fibres.
19
Content available remote Badania cieplno-wilgotnościowe systemu ETICS z barierą ogniową
PL
W artykule przedstawiono wybrane wyniki badań cieplno-wilgotnościowych ściany zewnętrznej ze złożonym systemem ociepleń ETICS. Izolacja termiczna wykonana ze styropianu zawierała dodatkowe elementy stanowiące barierę ogniochronną. Zostały one wykonane w postaci poziomego pasa wełny mineralnej na całej szerokości ściany i dodatkowych pasów nad otworami. Badania laboratoryjne wg ETAG 004, w postaci cykli cieplno-wilgotnościowych, stanowiły podstawę do oceny stanu technicznego warstw wykończeniowych, w postaci czterech zróżnicowanych tynków zewnętrznych.
EN
The article presents selected results of thermo-humidity tests of the external wall with a complex ETICS insulation system. Thermal insulation was made in the form of expanded polystyrene, along with a horizontal strip of mineral wool and its additional bands over the windows, which are fire barriers. Laboratory tests according to ETAG 004 in the form of hygrothermal cycles constituted the basis for assessing the technical condition of the finishing layers in the form of four different external renders.
PL
Przedmiotem artykułu są wymagania oceny technicznej dla zestawów wyrobów do wykonywania ociepleń stropów od strony sufitów z zastosowaniem wyrobów z wełny mineralnej (MW). Zostały w nim omówione zagadnienia związane z Krajową Oceną Techniczną (KOT), a także garażowy system ociepleń, wymagania w zakresie bezpieczeństwa pożarowego, higieny, zdrowia, środowiska i bezpieczeństwa użytkowania oraz ochrony przed hałasem. Przedstawiono także skład zestawu wyrobów do izolacji cieplnej.
EN
The subject of the paper are technical assessment requirements for product kits used in thermal insulation of ceilings with the use of mineral wool products (MW). It describes the issues related with the National Technical Assessment as well as the garage thermal insulation system, fire safety, hygiene, health, environmental and safety of use requirements and noise protection requirements. The composition of the thermal insulation products kit has also been presented.
first rewind previous Strona / 7 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.