Artykuł przedstawia zachowanie się niezbrojonych połączeń ścian wykonanych z elementów murowych z autoklawizowanego betonu komórkowego (ABK). Na podstawie badań własnych zdefiniowano i opisano poszczególne fazy pracy połączenia. Zaproponowano empiryczne podejście umożliwiające określenie sił i przemieszczeń połączenia ścian z wykorzystaniem parametrów uzyskiwanych ze standardowych testów zawartych w przepisach normowych.
EN
The article presents the description of the behavior of unreinforced joints of walls made of masonry elements of autoclaved aerated concrete (AAC). Based on our own research, the individual phases of the connection were defined and described. An empirical approach was proposed to determine the forces and displacements of the wall connection using parameters obtained from standard tests included in the standard provisions.
2
Dostęp do pełnego tekstu na zewnętrznej witrynie WWW
W artykule przedstawiono opis zachowania się połączeń zbrojonych ścian z autoklawizowanego betonu komórkowego (ABK). Jako zbrojenie zastosowano klasyczne blaszki perforowane, a także autorskie łączniki. Analogicznie jak w przypadku połączeń niezbrojonych (przedstawionych we wcześniejszej publikacji) określono i zdefiniowano fazy pracy połączenia. Zaproponowano empiryczne podejście umożliwiające określenie sił i przemieszczeń połączenia z wykorzystaniem wyników badań pochodzących z mniej skomplikowanych badań standardowych.
EN
The article presents a description of the behavior of joints of reinforced walls of autoclaved aerated concrete. Classic a punched flat profile were used as reinforcements, as well as proprietary connectors. Similarly as in the case of unreinforced connections (presented in an earlier publication) individual phases of the connection's operation were defined. An empirical approach was proposed to determine the forces and displacements of the wall connection using test results from less complex standard tests.
3
Dostęp do pełnego tekstu na zewnętrznej witrynie WWW
Artykuł przedstawia syntezę wyników własnych badań niezbrojonych połączeń ścian wykonanych z autoklawizowanego betonu komórkowego. Omówiono zależności obciążenie – przemieszczenie niezbrojonych połączeń z klasycznym wiązaniem murarskim. Wykorzystując normowe procedury, podano parametry umożliwiające projektowanie połączeń.
EN
The article presents a synthesis of own results of unreinforced joints of walls made of autoclaved aerated concrete masonry units. The relationships of the load displacement of unreinforced joints with the classical masonry bond are discussed. Using the standard procedures, parameters enabling the design of joint were given.
4
Dostęp do pełnego tekstu na zewnętrznej witrynie WWW
The paper presents the results of the Authors’ tests on the joints in AAC masonry walls. The shape of the tested element and the test stand were fitted innovatively based on the Authors’ own experience as well as on the literature overview and numerical analysis. Cracking morphology and mode of failure were investigated. The relationship between the load and displacement for different types of joins was compared. The obtained results were also compared to the results obtained on the reference model, which was a model with a traditional masonry bond. In the remaining testing elements, the connection was realized with the use of steel connectors. Various mechanisms of cracking and failure have been observed as well as the behaviour and load-bearing capacity of joints were different. The obtained results encourage to further analyses focused on detailing the joints and application of new methods in the construction of the joints.
5
Dostęp do pełnego tekstu na zewnętrznej witrynie WWW
Podczas projektowania zakłada się przestrzenną współpracę stropów oraz ścian, która wpływa na warunki stateczności oraz sztywności konstrukcji budynku. Połączenia ścian rozpatruje się nie tylko w aspekcie konstrukcyjnym, ale również pod kątem izolacyjności termicznej i akustycznej, które najczęściej absorbują najwięcej uwagi. Normy projektowania konstrukcji murowych nakazują jednak sprawdzenie nośności połączenia ścian, nie podając żadnych algorytmów obliczeniowych, a nawet procedur badawczych. Taki stan rzeczy wynika z tradycyjnego podejścia, że spełnienie warunków konstrukcyjnych zapewnia spełnienie warunków ULS. Przy stosowaniu nowoczesnych konstrukcji ścian oraz łączników sprawdzenie nośności połączenia ścian może okazać się niewystarczające, a nawet niebezpieczne. Artykuł rozpoczyna cykl publikacji poświęconych tematyce połączeń ścian, starając się wypełnić obserwowaną lukę w aktualnym stanie wiedzy. Na wstępie zaprezentowane zostaną ustalenia normowe i podstawowe poglądy w tej dziedzinie. W kolejnych publikacjach omówione zostaną wyniki badań własnych połączeń ścian murowych z autoklawizowanego betonu komórkowego (ABK) i numeryczne modele MES.
EN
In the design process spatial co-operation of floors and walls is assumed which has an influence on the stability and stiffness of the building’s structure. Wall joints are investigated not only in the structural aspect but also in the view of their thermal and acoustic insulation, which usually focuses most of the attention. Design standards for masonry structures demand, however, that load-bearing capacity of walls joints is controlled but without providing any calculation algorithms, let alone testing procedures. This results from the commonly used assumption that conditions of structural safety are fulfilled when ULS conditions are satisfied. When modern structures of masonry walls and connectors are used, control of the load-bearing capacity of the wall joints can be insufficient or even dangerous. This paper begins a series of publications dedicated to the topic of wall joints, aiming at filling up a void in the current state of the art. This introduction presents standard recommendations and basic approaches to the matter. The following publications will discuss the original test results of autoclaved aerated concrete (AAC) masonry walls joints and numerical simulations.
6
Dostęp do pełnego tekstu na zewnętrznej witrynie WWW
W artykule zostały przedstawione wyniki badań własnych połączeń ścian wykonanych z autoklawizowanego betonu komórkowego. Przeanalizowano morfologię zarysowań i mechanizm zniszczenia, porównano zależność obciążenie - przemieszczenie różnych typów połączeń. Uzyskane wyniki odniesiono do rezultatów otrzymanych z modelu referencyjnego z klasycznym wiązaniem murarskim. W pozostałych modelach badawczych połączenie zostało ukształtowane przy użyciu najpowszechniej stosowanych w Polsce łączników stalowych w postaci: kątowników oraz blaszek perforowanych. Wykazano różny mechanizm zarysowania i zniszczenia oraz wyraźne różnice nośności każdego typu połączenia.
EN
The paper presents original results of the tests performed on the joints of the walls made of AAC blocks. The analysis covered morphology of cracking and failure mechanism, as well as comparison of stress - strain relationship of different types of joints. The obtained results were related to the results of the reference model which was the model with classical masonry joint. In the remaining testing models the joint was made with the use of the most commonly used steel connectors in Poland applied in these joints: angle profiles and punched flat profiles. It has been shown that the joints differ in the cracking pattern and failure mechanism as well as in the load-bearing capacity.
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.