Ograniczanie wyników
Czasopisma help
Autorzy help
Lata help
Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 36

Liczba wyników na stronie
first rewind previous Strona / 2 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  stopowanie
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 2 next fast forward last
EN
The chemical composition of alloys plays an important role at their crystallization and influences the solid phase formation, and thus, microstructure and properties. The present paper studies the release of the heat of crystallization of alloyed wear-resistant cast irons in order to determine the quantitative patterns of the chemical composition influence to the kinetics of crystallization. The differential thermal analysis was applied to get the data of heat release, its rate at cast iron temperature decrease. The normalized dependence of the amount of crystallization heat over time was obtained. The main temperature parameters were analyzed and four stages at irons crystallization were established and characterized with their duration and released heat. The multiple correlation analysis allowed considering a numerous physical and chemical factors and distinguishing their role at crystallization of irons. As a result, the quantitative regularities are determined of influencing the content of alloying elements, impurities and carbides on a heat and time of crystallization at the different stages of solidification, which are of great importance in developing alloyed irons with required quality and properties.
PL
Praca stanowi trzecią część większej całości, przyczynkowych badań w zakresie technologii laserowych stali o różnym składzie chemicznym. W pierwszych dwóch częściach omówiono skutki obróbki laserowej stali węglowych [1] i konstrukcyjnych stopowych [2]. W pierwszej części pracy wykazano, że wzrost zawartości węgla powoduje wyraźny wzrost twardości zahartowanej laserowo stali, wpływa na kształt warstwy oraz na charakter nieciągłości powstałych w strefie przetopionej. W badaniach pro-wadzonych w części drugiej potwierdzono znaczenie udziału węgla oraz oceniono wpływ składników stopowych na odpuszczalność stali. Wykazano ponadto, że obróbka laserowa niszczy warstwę dyfuzyjną, azotowaną. Badania, których wyniki zawiera niniejsza praca są owocem współpracy trzech ośrodków badawczych: Instytutu Fraunhofera IPT – Aachen, Instytutu Maszyn Roboczych i Transportu Politechniki Poznańskiej oraz Instytutu Obróbki Plastycznej w Poznaniu. Praca zawiera wyniki badań skutków obróbki laserowej stali NC11LV w stanie wyjściowym (wyżarzonym) i zahartowanym z różnej temperatury, także w warstwach położonych w różnej od siebie odległości. Ponadto praca zawiera ocenę jakości stopowania, z pomocą proszków o różnej zawartości składników stopowych stali przeznaczonej na narzędzia kuźnicze. Struktura wyjściowa stali NC11LV była martenzytyczna z niewielką ilością austenitu szczątkowego po hartowaniu z temperatury 1020oC oraz zawierającą austenit z niewielką ilością węglików po hartowaniu z temperatury 1150oC. Stwierdzono, że twardość stali w strefie przetopionej (około 500 HV0,1) jest zbliżona do twardości stali NC11LV zahartowanej z temperatury 1150oC, a w strefie przejściowej rozrzut wyników pomiarów twardości jest nieregularny; bardziej w strefie hartowania wstępnego z temperatury 1020oC. Natomiast wpływ prędkości przemieszczania się wiązki światła lasera na stan strefy przypowierzchniowej próbki jest podobny jak w pracach [1–2]; wzrost prędkości powoduje zmniejszenie „parametrów” warstwy. Z badań wynika, że obróbka laserowa niezależnie od stanu wyjściowego (temperatury hartowania) nie po-woduje korzystnych zmian warstwy wierzchniej stali NC11LV. Pozytywne rezultaty uzyskano natomiast w badaniach nad technologią stopowania narzędzi kuźniczych ze stali WCL. W próbkach stopowanych z pomocą proszku Mo/VC wyznaczono temperaturę odpuszczania stopowanych warstw (600oC), wyższą od temperatury odpuszczania stali szybkotnących. W badaniach nad doborem technologii oceniono piętnaście wariantów, w których zastosowano trzy grupy proszków o różnym składzie chemicznym WC/Co, WC/Co/Cr i Mo/VC w odpowiednim stosunku składników i wielkości dozowania. Przeprowadzono badania strukturalne otrzymanych warstw. Na podstawie oceny właściwości uzyskanych podczas pomiarów twardości, własności mechanicznych (próby zginania i badań zmęczeniowych) oraz badań odporności na zużycie ścierne, wybrano warunki najlepszej technologii. Zastosowane w badaniach azotowanie – podobnie jak poprzednio – spowodowało pogorszenie jakości warstwy stopowanej.
EN
This article is the third in a series of studies concerning laser treatment technologies applied to steel with different chemical compositions. The effects of laser treatment of carbon steels [1] and constructional alloy steels [2] are discussed in the first two articles. In the first one, it is demonstrated that increasing carbon content results in clear growth of the hardness of laser-hardened steel, affects the shape of the layer and the character of discontinuities forming in the melted zone. In the second, the significance of carbon share was confirmed and the influence of alloying elements on temperability of steel was evaluated. Moreover, it was demonstrated that laser treatment destroys the diffusive, nitrided layer. The test results found here are the fruit of collaboration between three research centers: Fraunhofer Institute for Production Technology IPT – Aachen, Insti-tute of Industrial Machinery and Transportation of Poznań University of Technology and the Metal Forming Institute in Poznań. This article contains results of laser treat-ment tests performed on NC11LV steel in its initial (annealed) state and hardened at different temperatures, including in layers situated at varying distances from one an-other. Furthermore, the article provides an evaluation of the quality of alloying by means of powders with varying contents of alloying ingredients of the steel intended for forging tools. The initial structure of NC11LV steel was martensitic with a small amount of residual austenite after hardening at 1020oC, and containing austenite with a small amount of carbides after hardening at 1150oC. It was determined that the hardness of steel in the melted zone (approx. 500 HV0.1) is similar to the hardness of NC11LV steel hardened at 1150oC, and in the transitional zone, the dispersion of hardness measure-ment results is irregular; more so in the initial hardening zone at 1020 oC. The influence of laser beam travel speed on the state of the specimen’s near-surface layer is similar as in articles [1–2]; increasing travel speed reduces the layer’s “parameters”. Tests show that, regardless of the initial state (hardening temperature), laser treatment does not result in beneficial changes of the surface layer of NC11LV steel. However, positive re-sults were obtained in tests of alloying technology for forging tools made of WCL steel. In specimens alloyed using Mo/VC powder, tempering temperature of the alloyed layers was determined (600oC), higher than the tempering temperature of high-speed tool steels. Fifteen variants were evaluated in tests on the selection of technology, in which three groups of powders with different chemical compositions were applied: WC/Co, WC/Co/Cr and Mo/VC, in the appropriate proportion of ingredients and doses. Struc-tural tests of the layers obtained were carried out. Based on evaluation of properties obtained during hardness measurements, tests of mechanical properties (bending and fatigue tests) as well as abrasion resistance tests, the conditions of the best technology were selected. Nitriding applied in the tests caused the quality of the nitrided layer to deteriorate - similarly as before.
EN
Purpose: The aim of the proposed research is to investigate operational properties of a wheel steel treated with simultaneous solid solution and precipitation hardening at various carbon content, in comparison with the standard wheel grade T steel. Design/methodology/approach: The mechanical behaviour of wheel steels with increased content of silicon, manganese, vanadium, and nitrogen at various carbon content has been investigated and compared to that of the standard high-strength wheel grade T steel. The steels were undergo thermal treatment due to austenitic heating up to a temperature of 950.C with cooling down in water to 550.C followed by intense blowing of blanks in the air. After that, a tempering was performed at a temperature in the range of 450-650.C. Static strength (UTS), relative elongation (TEL), impact toughness tests (KCV) were determined on standard specimens. The characteristics of Mode I fatigue crack growth resistance of steel were determined on the basis of fatigue macrocrack growth rate diagrams da/dN–ΔKI, obtained by the standard method on compact specimens with the thickness of 10 mm at a frequency of 10-15 Hz and the stress ratio R = 0.1 and R = 0.5 of the loading cycle. The characteristics of Mode II fatigue crack growth resistance were determined on the basis of da/dN–ΔKII diagrams, obtained earlier method on edge notched specimens with the thickness 3.2 mm at a frequency of 10-15 Hz and R = -1 taking account of the crack face friction. Rolling contact fatigue testing was carried out on the model specimens. Findings: The regularities of the change of mechanical characteristics of the high-strength wheel steel with simultaneous solid solution and precipitation hardening at lowered carbon content under static, impact and cyclic loading are studied. Research limitations/implications: The results obtained using laboratory samples should be checked during a real railway wheels investigation. Practical implications: The investigated steel with simultaneous solid solution and precipitation hardening provides high wear resistance of the tread surface and damage resistance determined on the model wheels. Originality/value: A steel with solid solution hardening due to increased content of silicon (up to 0.7%) and manganese (up to 0.8%) and also with precipitation hardening (at optimal content of vanadium and nitrogen [V‧N]‧104 = 28.9%) at lowered carbon content (0.52) possesses high strength and fatigue fracture toughness in cases of Mode I and Mode II loading, causing better combination of wear and damage resistances of the tread surface of the model wheels, as compared to corresponding parameters for grade T steel.
EN
The structure of permanent mold and high pressure die castings of the AlMg5Si2Mn alloy after alloying with Li and Sc has been investigated by scanning and transmission electron microscopy, hardness and microhardness measurements, energy dispersive X-ray analysis. Three conditions, as cast, solution treated and aged, were investigated. It was shown that in as-cast state, the structure of an alloy having the nominal composition AlMg5Si2Mn consists of four phases: first – the Al based solid solution, second – the (Al) + (Mg2Si) eutectic, third – the primary Mg2Si crystals and fourth – the α-Al(Mn, Fe)Si phase. Similar phases were observed in the alloys containing Sc or Li. After two days of storing in an as-cast condition, the solid solution in all tested alloys decomposes and forms zebra-crossing shaped precipitates. TEM examinations revealed that these precipitates nucleate heterogeneously on dislocations. The solution treatment at 575.0°C results in spheroidization of the Mg2Si lamellas, dissolution of the precipitates and formation of α-Al(Mn, Fe)Si dispersoids, nucleating on the surfaces of Mg2Si lamellas. In the Sc containing alloys, the formation of Al3Sc was detected after 120 min soaking. Further heating resulted in the growth of these precipitates. Aging of the Al-Mg-Si alloys leads to an increase of hardness in all studied alloys. This effect is mainly related to precipitation strengthening, via solid solution decomposition and formation of β’’-phase. In Li-alloyed specimens, plates of β Mg2Si phase were observed together with small cubic-shaped δ’ Al3Li precipitates.
PL
Strukturę odlewów wykonywanych w formach stałych i odlewów wysokociśnieniowych ze stopu AlMg5Si2Mn po stopowaniu Li i Sc badano za pomocą skaningowej i transmisyjnej mikroskopii elektronowej, a także wykonując pomiary twardości i mikrotwardości oraz prowadząc analizę rentgenowską z dyspersją energii. Badano trzy warianty: stan po odlaniu, odlew przesycony i starzony. Wykazano, że w stanie po odlaniu struktura stopu o nominalnym składzie AlMg5Si2Mn składa się z czterech faz: pierwsza – roztwór stały na bazie Al, druga – (Al) + (Mg2Si) eutektyczna, trzecia – pierwotne kryształy Mg2Si i czwarta – α-Al(Mn, Fe)Si. Podobne fazy zaobserwowano w stopach zawierających Sc lub Li. Po dwóch dniach przechowywania w stanie po odlaniu roztwór stały we wszystkich testowanych stopach rozkłada się i tworzy wydzielenia w kształcie przejściowym. Badania TEM ujawniły, że wytrącają one heterogenicznie jądro podczas dyslokacji. Obróbka roztworu przy 575,0°C powoduje sferoidyzację płytek Mg2Si, rozkład wydzieleń i tworzenie dyspersoidów oraz zarodkowanie na powierzchniach płytek Mg2Si. W stopie zawierającym Sc fazę Al3Sc wykryto po 120 min wygrzewania. Dalsze ogrzewanie spowodowało wzrost tych wydzieleń. Starzenie stopów Al-Mg-Si prowadzi do wzrostu twardości wszystkich badanych stopów. Efekt ten jest głównie związany z utwardzaniem wydzieleniowym na skutek rozkładu w stanie stałym i tworzenia fazy β’’. W próbkach ze stopu z litem obserwowano płytki fazy β-Mg2Si wraz z małymi sześciennymi wydzieleniami δ’-Al3Li.
EN
Purpose: The work presents the application of the Finite Elements Method in a computer simulation whose aim is to determine the properties of PVD and CVD coatings on various substrates and to optimise parameters of a laser surface treatment process of surface layers of tool steels. Design/methodology/approach: The article discusses the application of the finite elements method for simulating the determination of stresses and microhardness of Ti+TiN, Ti+Ti(CN) and Ti+TiC coatings obtained in a magnetron PVD process on a substrate of sinter high-speed steel, of Ti/Ti(C,N)/CrN, Ti/Ti(C, N)/(Ti, Al)N, Ti/(Ti, Si)N/(Ti, Si)N, Cr/ CrN/CrN, Cr/CrN/TiN and Ti/DLC/DLC coatings obtained in a PVD and CVD process on magnesium alloys, of graded and monolayer coatings (Ti, Al)N, Ti(C,N) produced with the PVD arc technique on a substrate of sintered carbides, cermets and oxide tool ceramics and tool steel remelted and alloyed with a high-performance diode laser (HPDL). Modeling of stresses was performed with the help of finite element method in ANSYS and MARC environment, and the experimental values of stresses were determined based on the sin2Ψ. Findings: The models presented satisfy the assumed criteria, and they can be applied for the determination of properties of surface layers and optimisation of PVD and CVD processes and laser alloying and remelting. The results of a computer simulation correlate with experimental results. The models developed allow to largely eliminate costly, timeconsuming and specialist experiments which have to be done during investigations for the benefit of computer simulations. Research limitations/implications: To be able to assess the possibility of application of surface layers, a computer simulation of other properties of coatings has to be additionally carried out, and a strength analysis has to be made of other coatings coated onto various substrate materials. Originality/value: value Computer simulation and modelling is an interdisciplinary field necessary for the development of science and technology, enabling to perform direct visualisation of properties, which cannot be identified in experimental observations. The purpose of computer simulation and modelling is to improve the ability to predict results and to optimise solutions.
EN
In this study, Taguchi method is used to find out the effect of micro alloying elements like vanadium, niobium and titanium on the hardness and tensile strength of the normalized cast steel. Based on this method, plan of experiments were made by using orthogonal arrays to acquire the data on hardness and tensile strength. The signal to noise ratio and analysis of variance (ANOVA) are used to investigate the effect of these micro alloying elements on these two mechanical properties of the micro alloyed normalized cast steel. The results indicated that in the micro alloyed normalized cast steel both these properties increases when compared to non-micro-alloyed normalized cast steel. The effect of niobium addition was found to be significantly higher to obtain higher hardness and tensile strength when compared to other micro alloying elements. The maximum hardness of 200HV and the maximum tensile strength of 780 N/mm2 were obtained in 0.05%Nb addition micro alloyed normalized cast steel. Micro-alloyed with niobium normalized cast steel have the finest and uniform microstructure and fine pearlite colonies distributed uniformly in the ferrite. The optimum condition to obtain higher hardness and tensile strength were determined. The results were verified with experiments.
PL
W artykule przedstawiono analityczne rozwiązanie zagadnienia sił, z jakimi oddziałują pojedyncze włókna szczotki obrotowej z powierzchnią podczas obróbki BEDMA. Przeprowadzono analizę deformacji pojedynczych drucików szczotki, uwzględniając występujące więzy kinematyczne dla przypadku powierzchni płaskiej niepodatnej, z występowaniem tarcia. Przedstawiono wyniki symulacji w postaci zależności sił oddziaływań drucików z powierzchnią w funkcji kąta obrotu szczotki.
EN
In this paper, an analytical procedure is developed in order to evaluate the filament loading of a circular brush. Filament deformation is computed based on the mechanic analysis in conjunction with kinematic constraints for a rigid flat surface with friction taken into account. Numerical results which reveal the relationship between rotation angle and force distribution are reported.
8
Content available remote Laser surface treatment of cast Al-Si-Cu alloys
EN
Purpose: The test results presented in this chapter concern formation of the quasi-composite MMCs structure on the surface of elements from aluminium cast alloys AC-AlSi9Cu and AC-AlSi9Cu4 by fusion of the carbide or ceramic particles WC, SiC, ZrO2 and Al2O3 in the surface of alloys. In addition, within the scope of the tests the phase transformations and precipitation processes present during laser remelting and fusion at appropriately selected parameters: laser power, the rate of fusion and quantity of the ceramic powder fed have been partially examined. Design/methodology/approach: In general, the laser surface processing should result in achievement of the surface layer with the most favourable physical and mechanical properties, in particular enhancement of surface hardness, improvement of abrasion resistance and resistance to corrosion is assumed in relation to the selected aluminium alloys after standard thermal processing. Findings: The presented results of the surface layer include analysis of the mechanisms responsible for formation of the layer, and particularly concern remelting of the substrate and its crystallisation at various parameters of the High Power Diode Laser (HPDL) and the technological conditions of the surface processing, remelting and fusion of the particles in the surface of cast alloys ACAlSi9Cu and ACAlSi9Cu4. For the purpose of testing the structure of the obtained surface layers the test methods making use of the light microscopy method supported with computer image analysis, transmission and scanning electron microscopy, X-ray analysis, X-ray microanalysis, as well as methods for testing the mechanical and usable properties have been used. Practical implications: What is more, development of the technology of surface refinement of cast alloys Al-Si-Cu with the laser fusion methods will allow for complex solving of the problem related to enhancement of the surface layer properties, taking into account both economic and ecological aspects. Originality/value: On the basis of the test result analysis it has been pointed out that in case of the analysed aluminium cast alloys the applied laser surface processing, and the thermal processing preceding it, ensuring occurrence of the mechanisms responsible for material strengthening, enable enhancement of the mechanical and usable properties of the examined alloys. An essential objective is also to indicate the multiple possibilities for continuation of the tests, regarding the light metal alloys aluminium, magnesium and titanium, broadening the current knowledge within the scope of elements and light structures.
EN
The aim of this work was to investigate the changes of stainless steel surface properties (morphology, REE concentration, presence of identified phases) and functional properties (wear and high temperature oxidation resistance) after REE addition with remelting of the surface layer. Modification of the near surface layer of AISI 316L steel was based on the incorporation of rare earth elements (REE) using high intensity pulsed plasma beams (HIPPB) as DPE – Deposition by Pulsed Erosion. DPE is unique technique because melting and doping of the near surface layer occurs in a single step. Samples of AISI 316L steel were irradiated with short (μs scale), intense (energy density 3 J/cm2) pulses. The pulse energy density was sufficient to melt the near surface layer of steel. Heating and cooling processes were of non-equilibrium type. The plasma pulses contain both ions/atoms of (Ce + La) from electrodes material and the working gas – nitrogen. Scanning electron microscopy (SEM), energy dispersion spectroscopy (EDS) and X-ray diffraction analysis were used for initial and modified surface characterization. The wear tests and high temperature oxidation processes were carried out. An improvement of tribological properties and increasing of high temperature oxidation resistance of modified surface layer was observed as compared with initial material.
PL
Celem pracy było zbadanie zmian właściwości powierzchniowych (morfologia powierzchni, koncentracja REE, obecność zidentyfikowanych faz) i właściwości użytkowych (odporność na zużycie przez tarcie i wysokotemperaturowe utlenianie) po domieszkowaniu REE z jednoczesnym przetopieniem warstwy wierzchniej stali austenitycznej. Modyfikacja warstwy wierzchniej stali AISI 316L polegała na wprowadzeniu do jej warstwy powierzchniowej pierwiastków ziem rzadkich (REE) za pomocą intensywnych impulsów plazmowych (HIPPB) metodą DPE – Depozycja przez Impulsową Erozję (Deposition by Pulse Erosion). Metoda DPE jest unikatową techniką, ponieważ stopienie i domieszkowanie warstwy wierzchniej materiału przebiega jednocześnie. Próbki stali AISI 316L zostały naświetlone krótkimi (skala μs), intensywnymi (gęstość energii 3,0 J/cm2) impulsami. Gęstość energii pojedynczego impulsu była wystarczająca do stopienia warstwy wierzchniej stali. Procesy grzania i chłodzenia miały charakter nierównowagowy. Plasma zawierała jony/atomy pochodzące z materiału elektrod (Ce + La) i azotu jako użytego gazu roboczego. Materiały wyjściowy i modyfikowane scharakteryzowano za pomocą: skaningowej mikroskopii elektronowej (SEM), mikroanalizy rentgenowskiej (EDS) i dyfrakcji promieniowania rentgenowskiego (XRD). Zostały przeprowadzone badania odporności na zużycie przez tarcie oraz odporności na wysokotemperaturowe utlenianie. Uzyskano poprawę właściwości tribologicznych oraz zwiększenie odporności na wysokotemperaturowe utlenianie warstw modyfikowanych w porównaniu z materiałem niemodyfikowanym.
EN
Purpose: This paper presents the results of laser remelting influence on structure and properties of the surface of the X40CrMoV5-1 and 32CrMoV12-28 hot work tool steels, carried out using the high power diode laser (HPDL). Structure changes were determined in the work, especially structure fragmentation. Also hardness investigation of the different remelting areas was performed. The purpose of this work was also to determine technological and technical parameters for a right performed HPDL remelting process. Boron nitride powder was used for alloying. The goal of this work was also to determine technical and technological conditions for remelting the surface layer with HPDL. Design/methodology/approach: Here are discusses the new methodology ways which can be applied in case of improving of the surface layer properties. A new laser treatment techniques applied in metal surface technology is here the most important feature. Also the influence of ceramic powders to the structure in all zones is investigated. Optical and scanning electron microscopy, EDS point wise and area microanalysis was used to characterize the microstructure and to investigate the intermetallic phases occurred. Findings: The most important factor is the zone structure of the surface layer which was coming into existence without cracks and defects as well as has a considerably higher hardness value compared to the non remelted material. It was find out, that the hardness of the alloyed surface layer increases according to the applied laser power. The highest power applied gives the highest hardness value in the remelted layer mostly in all user ceramic powders. Practical implications: The reason of this work was also to determine the laser treatment parameters, particularly the laser power, to achieve a good layer hardness for protection of this hot work tool steel from losing their work stability and to make the tool surface more resistant for work extreme conditions. The most important practical implication investigated in this work improves the appliance of HPDL laser for alloying and remelting of hot work tool steel. Originality/value: The originality of this work is assured through the using of an high-level up-to-date laser device for improvement of steel surface layer mechanical properties.
11
Content available remote HPDL laser alloying of Al-Si-Cu alloy with Al2O3 powder
EN
Purpose: This article presents results of investigation of laser alloyed cast aluminium alloys after standard heat treatment. In general into the aluminium matrix there are fed different types of ceramic particles including aluminium oxide. The purpose of this work was also to determine the laser treatment conditions for surface hardening of the investigation alloys, like laser power, as well the laser scan rate. Design/methodology/approach: The investigations were performed using light and electron microscopy (SEM) for structure determination, using EDS microanalysis it was also possible to determine the chemical composition changes. The morphology and size of the ceramic powder particles was also possible to determine. Findings: Concerning the laser treatment conditions for surface hardening the scan rate as well as the laser power influence was studied. The structure of the surface laser tray changes in a way, that there are very high roughness of the surface zone and the flatness or geometry changes. Research limitations/implications: The aluminium samples were examined metallographically using optical microscope with different image techniques as well as scanning electron microscope. Practical implications: Developing of new technology with appliance of Al alloys, High Power Diode Laser and diverse ceramic powders can be possible to obtain, based in findings from this research project. Some other investigation should be performed in the future, but the knowledge found in this research concerning the proper process parameters for each type of alloy shows an interesting investigation direction. Originality/value: The combination of metallographic investigation, including electron microscope investigation and High Power Diode Laser (HPDL) treatment parameters makes the investigation very attractive especially for automobile industry, and transportation where parts manufactured of aluminium alloys are a very important because of its surface properties.
EN
The paper presents a brief study of electro-discharge mechanical machining with an elastic, discrete electrode. The factors causing the chemical composition and surface roughness of superficial layer have also been taken into consideration. Attention has also been given to the relation between the material of electrode and the superficial layer composition. The superficial layer obtained by BEDMM consist of several layers. At the top, a molten and resolidified laver, called recast layer, is observed. This layer is usually present because material removal in BEDMM is mainly based on melting process of the workpiece material. In the recast layer in machining condition the mixing and diffusion of the material hot electrode and the workpart can occur.
13
Content available remote HPDL laser alloying of heat treated Al-Si-Cu alloy
EN
Purpose: There are presented in this paper the investigation results of microstructure of the cast aluminium alloys in the as cast state as well after laser treatment used for alloying with carbide and oxide ceramic powders like aluminium oxide and silicon carbide, titanium carbide, vanadium carbide and tungsten carbide. The purpose of this work was also to determine the laser treatment conditions for surface hardening of the investigation alloys, like laser power, as well the laser scan rate. Design/methodology/approach: The investigations were performed using light and electron microscopy for the microstructure determination. By mind of the transmission electron microscopy, especially selected area diffraction method appliance it was possible to determine the phases occurred in the alloy in the as cast state. The morphology and size of the Mg2Si was also possible to determine as well the lattice parameters for this phase. Findings: Concerning the laser treatment conditions for surface hardening the scan rat as well as the laser power influence was studied. It was used a power in the range between 1.0 and 2.0 kW The structure of the surface laser tray changes in a way, that there are very high roughness of the surface zone and the flatness or geometry changes in an important manner, crucial for further investigation. Research limitations/implications: The aluminium samples were examined metallographically using optical microscope with different image techniques as well as transmission electron microscope. Practical implications: Developing of new technology with appliance of Al alloys, High Power Diode Laser and diverse ceramic powders can be possible to obtain, based in findings from this research project. Some other investigation should be performed in the future, but the knowledge found in this research concerning the proper process parameters for each type of alloy shows an interesting investigation direction. Originality/value: The combination of metallographic investigation for cast aluminium alloys – including electron microscope investigation – and HPDL treatment parameters makes the investigation very attractive for automobile, aviation industry, and others where aluminium alloys plays an important role.
EN
In this work, the change of the structure and microhardness of Ti6Al4V titanium alloy after remelting and remelting with SiC alloing by electric arc welding (GTAW method) was studied. The current intensity equal 100 A and fixed scan speed rate equal 0,2 m/min has been used to remelting surface of the alloy. Change of structure were investigated by optical and scanning electron microscopy. Microhardness test showed, that the remelting of the surface does not change the hardness of the alloy. Treated by GTAW SiC alloying leads to the formation of hard (570 HV0,1) surface layer with a thickness of 2 mm. The resulting surface layer is characterized by diverse morphology alloyed zone. The fracture of alloy after conventional heat treatment, similarly to fracture after remelting with GTAW is characterized by extremely fine dimples of plastic deformation. In the alloyed specimens the intergranular and crystalline fracture was identified.
15
Content available remote Technologia naprawy uchwytów klapy dużej biernej silnika odrzutowego RD-33
PL
Badania uszkodzeń uchwytów klapy dużej biernej silnika wykazały, że naprawa tych elementów wymaga opracowania warunków technologicznych napawania automatycznego plazmowego PTA oraz napawania laserowego HPDL materiałami dodatkowymi zapewniającymi zwiększoną odporność na zużycie ścierne metal-metal, w stosunku do materiału podłoża. Wstępne próby napawania plazmowego PTA oraz napawania laserowego HPDL wykazały, że można uzyskać napoiny wysokiej jakości. Przez odpowiedni dobór parametrów napawania możliwe jest sterowanie wymiarami napoin oraz udziałem materiału podłoża w napoinie. Wykonano również badania odporności na zużycie ścierne połączenia metal-metal zgodnie z normą ASTM G99. Wyniki badań tribologicznych wykazały, że warstwa napawana laserowo z dodatkiem proszku 50%Ti-50%WC spełnia wszystkie warunki i jest prawie 124 razy bardziej odporna na zużycie ścierne typu metal-metal niż powierzchnia nieutwardzona.
EN
Tests of handles of large passive flap, showed that the repair of these elements requires the development of technological conditions of automatic plasma PTA surfacing and HDPL laser surfacing with filler materials ensuring increase resistance to wear of metal-metal, relative to the substrate material. Trial attempts of PTA plasma surfacing and HPDL laser surfacing showed that there is a range of parameters to obtain high-quality padding welds. By appropriate parameters it is possible to control the padding weld dimensions and the participation of substrate material in the padding weld. There is also carried out the wear resistance of metal-metal in accordance with ASTM G99 tests. Tribological test results showed that the layer made with the use of laser and powder, 50% Ti 50% WC meets the best conditions and is almost 124 times more resistant to metal-metal abrasive wear than the unhardened surface.
PL
W artykule zaprezentowano wyniki badań nad wprowadzaniem molibdenu do stopów na osnowie żelaza. Molibden wprowadzano w postaci granul zawierających tlenek molibdenu i reduktor. W charakterze reduktorów stosowano żelazokrzem FeSi75 oraz silumin AlSi11. Uzyskano wysokie stopnie przechodzenia molibdenu do stopów bez istotnych zmian zawartości pozostałych składników. Skuteczność metody potwierdzono na próbkach o masie do 10 kg w warunkach laboratoryjnych.
EN
In this work, the results of alloying molybdenum to iron based alloys were presented. Molybdenum was alloyed as MoO3 granules with reducer. As reducers, ferrosilicon FeSi75 and silumin AlSi11 were used. High transition degrees of molybdenum without considerable changes of chemical composition of iron based alloys were obtained. The efficiency of the presented method was confirmed on a 10 kg samples in the laboratory.
PL
W artykule przedstawiono wyniki badań nad wprowadzaniem molibdenu do żeliwa w postaci trójtlenku molibdenu. Zbadano wpływ różnych rodzajów lepiszcza stosowanego do sporządzania granul MoO3 oraz różnej jego ilości na końcowy efekt procesu stopowania. Określono stopień przejścia molibdenu z tlenku do żeliwa, a także udział reduktorów zawartych w żeliwie na proces redukcji tlenku molibdenu.
EN
In the article, the results of alloying MoO3 to the cast iron were presented. The influence of the different kinds of binders and its addition on final effect of alloying were examined. The degree of molybdenum transition and the participation of reducers in cast iron for the process of MoO3 reduction were determined.
19
Content available remote Laserowa modyfikacja jakości warstwy wierzchniej
PL
Efektywną metodą kształtowania właściwości warstwy wierzchniej jest oddziaływanie na powierzchnię wyrobu wiązką światła laserowego o odpowiednio dobranej gęstości mocy. Przedstawiono możliwości laserowej modyfikacji warstwy wierzchniej dzięki zastosowaniu hartowania, stopowania i napawania laserowego. Zaprezentowano stanowisko do napawania laserowego i modyfikacji warstwy wierzchniej, znajdujące się w Instytucie Zaawansowanych Technologii Wytwarzania w Krakowie. Stanowisko wyposażone jest w głowicę COAX9, która dostarcza wiązkę laserową, proszek metalu i gaz ochronny do obszaru obróbki.
EN
The effective method of surface layer properties controlling is treating the material by manipulated laser beam. Possibilities of surface layer quality modification by means of laser quenching, alloying and cladding have been presented. The laser system for laser cladding and alloying situated in The Institute of Advanced Manufacturing Technology was described. The work stand is equipped with COAX9 head, which delivers laser beam, the metal powder and protective gas into machined area.
EN
The lifetime of tools and parts of machines is related with properties of surface layer. Thus the surface layer and its properties are elements which are critical for lifetime of tools and parts of machines and also for lifetime of whole technical equipment. If the working surface of a tool or its part is exposed to rough friction, an intensive mass and volume loss occurs. In this case it is reasonable to produce a surface layer which is extremely wear resistant to avoid the mass and volume loss. In this paper the results of remelting and alloying laser parameters on the structure and properties of the surface layer of the X40CrMoV5-1 and 32CrMoV12-28 hot work tool steels, using the high power diode laser (HPDL) are presented. The effect was determined of the main alloying parameters on hardness, abrasive wear resistance and roughness. The hot work tool steels conventionally heat treated were used as reference material and the tantalum carbide was used as an alloying material. The remelted layers which were formed in the surface of investigated hot work tool steels were metallographically examined and analyzed using a hardness testing machine.
first rewind previous Strona / 2 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.