Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 3

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  stopień odkształcenia
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
Corrosion behaviour and the dezincification process of cold-deformed CuZn-42 brass were tested in an acid sulphate solution at pH-value 2 with additional chloride and copper (II)-ions by use of the linear polarization method. The measured corrosion potential and densities of corrosion currents were observed as characteristics of the dezincification process and the corrosion resistance of tested samples of cold-deformed CuZn-42 brass. The results obtained have shown that pH-value 2 of the tested solutions and increased concentrations of copper (II)-ions result in increased values of densities of corrosion currents of the tested brass samples, as a result of selective zinc dissolution and the individual dissolution of zinc and copper including the process of anodic oxidation. The tested concentrations of chloride ions in certain conditions have an inhibiting effect, whereas in the other conditions they act as distinctive activators of brass corrosion. The lowest values of corrosion currents are present in the brass samples with the highest deformation degree at 80 %. The process of dezincification and anode dissolution of cold deformed brass samples were developed in the whole range of tested potentials.
PL
Przeprowadzono badania właściwości korozyjnych odkształconego na zimno mosiądzu gatunku CuZn-42 i procesu jego odcynkowania w kwaśnym roztworze siarczanowym o wartości pH = 2 z dodatkiem jonów chlorkowych i miedzi(II) metodą polaryzacji liniowej. Zmierzono potencjał korozyjny i gęstości prądów korozyjnych charakteryzujące proces odcynkowania i odporność korozyjną badanych próbek z mosiądzu CuZn-42 odkształconego na zimno. Otrzymane wyniki wykazały, że wartość pH = 2 badanych roztworów oraz podwyższone stężenie jonów miedzi(II) powoduje wzrost natężenia prądu korozyjnego w badanych próbkach mosiądzu, wynikający z selektywnego rozpuszczenia cynku i dodatkowego rozpuszczenia cynku i miedzi w procesie utleniania anodowego. Badane stężenia jonów chlorkowych miały w pewnych warunkach wpływ hamujący, natomiast w innych warunkach działały jako charakterystyczne aktywatory korozji mosiądzu. Najniższe wartości prądu korozyjnego stwierdzono w przypadku próbek mosiądzu o największym stopniu odkształcenia wynoszącym 80 %. Proces odcynkowania i rozpuszczania anodowego próbek mosiądzu odkształconych na zimno występował w całym zakresie badanych potencjałów.
EN
Purpose: Purpose of this paper Technology ECAP belongs to the most efficient technologies for production of materials with ultra-fine grained structure. Its disadvantage consists in necessity to make 4 to 5 passes through the channel of forming tool in order to obtain high degree of deformation needed for grain disintegration. Design/methodology/approach: Newly proposed geometry of the channel makes it possible to achieve up to double amount of deformation during the first pass through deformation tool. Findings: In this manner it is possible to obtain much higher efficiency of the whole process. It is a completely new approach to development of this technology. Research limitations/implications: New geometry of tool has been designed which represents the first step toward application of the given equipment in semi-industrial conditions. Practical implications: Obtained results form good pre-requisite for further development of technology for production of ultra-fine grained materials. Originality/value: Achievement of high amount of deformation already at the first pass through the modified ECAP tool. This will create an ultra-fine grained structure, which makes it possible to obtain required mechanical properties of formability with much lower number of passes. New findings will be applied in the field of forming.
PL
Pomiary pola powierzchni śladów przedniego i tylnego koła ciągnika MF 235 wykonano dla 3 różnych ciśnień w oponach i 5 obciążeń. Zastosowana metoda wideo-komputerowa pozwala na dokładne określenei mierzonych powierzchni dla różnych warunków eksploatacyjnych. Przedstawione wykresy oraz sformułowane równania regresji wskazują, iż powierzchnia śladów wzrasta proporcjonalnie do obciążeń i ciśnienia.
EN
The contact area of tracks left by front and rear tyred wheels of the MF235 tractor were measured for 3 different tyre pressure and 5 loads. The video-computer measuring method used in research enabled exact determination of measured contact areas at different operation conditions. The diagrams presented and formulated regression equations showed that the area of tyred wheel tracks increased pr
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.