Ograniczanie wyników
Czasopisma help
Autorzy help
Lata help
Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 37

Liczba wyników na stronie
first rewind previous Strona / 2 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  reaktor plazmowy
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 2 next fast forward last
EN
This paper presents a short review of the plasma technologies used in the commercial power industry. The most common thermal plasma sources for the pulverized coal burners and reactors used in solid fuel conversion processes are described. The authors’ own experience in the use of the plasma technique in energy applications is briefly presented. Proposals for the use of thermal plasma in the process of fuel conversion in pulverized-fuel power boilers, especially when operating at a lower technical minimum, are formulated.
PL
W niniejszym artykule przedstawiono, w oparciu o studia literaturowe, krótki przegląd technologii plazmowych stosowanych w energetyce zawodowej. Scharakteryzowano najczęściej stosowane źródła plazmy termicznej wykorzystywane w palnikach pyłowych i reaktorach stosowanych w procesach przetwarzania paliwa stałego. Krótko zaprezentowano doświadczenia własne z wykorzystania techniki plazmowej w zastosowaniach energetycznych. Przedstawiono propozycje wykorzystania plazmy termicznej w cyklu technologicznym przetwarzania paliwa w pyłowych kotłach energetycznych ze szczególnym uwzględnieniem ich pracy przy obniżonym minimum technicznym. Z przeprowadzonej analizy wynika, że w kraju brak jest szerszych doświadczeń z wykorzystania plazmy termicznej w warunkach ruchu obiektu. Na podstawie analizy wstępnie wykonanych badań, można uznać takie zastosowanie plazmy za korzystne przede wszystkim ze względu na stabilność płomienia oraz regulacyjność palnika. Realizacja podjętych przez autorów działań na rzecz wdrożenia techniki plazmowej do krajowego sektora energetycznego powinny zaowocować jej komercyjnym wdrożeniem. Przy odpowiednim wsparciu prac badawczych i rozwojowych, w szerokim zakresie w tym legislacyjnym, wdrożenie technologii plazmowych może stać się inwestycjami rentownymi dla sektora energetycznego.
PL
Reaktory plazmowe to zaawansowane urządzenia służące do oczyszczania m.in. gazów. Wyładowania reaktora są źródłem zaburzeń elektromagnetycznych generowanych do systemu zasilania. W pracy przedstawiono wyniki badań przewodzonych zaburzeń elektromagnetycznych w torze zapłonu trójfazowego reaktora GlidArc. Przeprowadzono analizę emisji zaburzeń (w odniesieniu do wymagań EMC) przy kilku prędkościach przepływu gazu roboczego podawanego do komory wyładowczej.
EN
Plasma reactors are advanced devices used to purify, among others gases. The reactor discharges are the source of electromagnetic interferences generated to the power system. The paper presents the results of investigations of conducted electromagnetic interferences in the ignition circuit of the three-phase GlidArc reactor. The analysis of interferences emission (in relation to EMC requirements) at several flow rates of the working gas fed into the discharge chamber.
PL
Reaktory plazmowe są urządzeniami technologicznymi odpowiedzialnymi za proces przekształcania gazu technologicznego w plazmę z wykorzystaniem energii elektrycznej. Źródłem plazmy jest wymuszony przepływ prądu elektrycznego w gazie w postaci łuku elektrycznego. Wyładowania elektryczne i plazma generowane przez reaktor plazmowy są źródłem silnych zakłóceń propagowanych zarówno przez promieniowanie, jak i przewodzenie. Artykuł zawiera charakterystykę poziomów zakłóceń elektromagnetycznych zidentyfikowanych w obwodzie zasilania reaktora i ich analizę w odniesieniu do zmiennej geometrii elektrod.
EN
Plasma reactors are technological devices responsible for the process of transforming process gas into plasma with the use of electric energy. The source of the plasma and the way it is supplied with energy is the forced flow of electric current in the gas in the form of an electric arc. The electrical discharges and plasma generated by the plasma reactor are a source of powerful interferences propagated by both radiation and conduction. The article contains the characteristics of electromagnetic interference levels identified in the power supply circuit of the reactor and their analysis in relation to the variable geometry of electrodes.
EN
Many researchers from around the world are looking for better and cheaper means of ozone production. One of the methods of increasing the efficiency of ozone production is the use of a rotating electrode presented in this paper. Experiments were carried out which showed that the most important parameters are the materials used in the electrodes and the condition of their surface. The metallographic investigations of the electrodes after continuous work for a month were made, which show how the raids layers are formed. As a result of working in a highly oxidizing environment, the electrode is oxidized in a process of chemical corrosion. It is obvious that the layer of corrosion products created during the work of the plasma reactor isolates the surface of the electrode, which reduces the intensity of the electric field, causing a decrease in the amount of plasma generated, which reduces the concentration of ozone during this process. The dynamics of the plasma generation process and the type of electrode material working in changing process conditions are the decisive factors influencing the concentration of ozone produced. The influence of the medium, which is the electrode material, depends mainly on its resistance to corrosion in the environment of dynamically changing conditions, e.g. electrode rotation, oxygen flow through the rotating electric field and the month-long working time of the plasma reactor.
EN
The ‘GlidArc’ plasma reactors and ‘DBD’ reactors are used for the production of non-thermal plasma. Reactors generate electric discharges. They are the source of plasma and electromagnetic emission too. Institute of Electrical Engineering and Electrotechnologies has several installations of plasma reactors. The article presents the values of measured E and B in the range of very low frequencies. Values were compared with valid national norms. As a result of the analysis, operation of the reactors does not cause danger to the personnel.
PL
Nowoczesne tworzywa sztuczne jakimi są polimery znajdują szereg zastosowań zarówno w przemyśle jak i użytku konsumenckim. Do zastosowań żywnościowych, przemysłowych, bioinżynieryjnych wymagane jest zachowanie czystości powierzchni od zanieczyszczeń bakteryjnych. Przedstawiony artykuł opisuje obróbkę plazmową powierzchni teflonowej, która wcześniej została skażona mikrobiologicznie. W procesie obróbki został zastosowany miniaturowy generator plazmy nietermicznej, pracujący przy ciśnieniu atmosferycznym.
EN
Plenty of modern materials which are artificial products like polymers, are widely implemented in industry as well as by regular consumers. In order to be used in food, chemical industry and bioengineering their surface needs to be relatively clear of bacterial and microbiological contaminations. The objective of our research is to describe and investigate the process of plasma treatment on TEFLON surface that was previously microbiologically contaminated. In the process of treatment miniature non thermal plasma generator was used at atmospheric pressure.
EN
The paper presents modified variants of the Voronin model of electric arc. In these modified variants, free changes in the arc diameter caused by current alternations are taken into account. Current alternations, in turn, are due to variable forcing voltage and diverging electrodes, on which the variable length arc is gliding. To approximate the arc diameter, two different functions are applied, allowing for the arc diameter expansion at the point of the current passing through zero. Simulations of the processes occurring in the circuit with a voltage source and a gliding arc (GA) plasma generator indicate that the mathematical model developed adequately represents the current and voltage variation in the elongated electric arc.
PL
W artykule przedstawiono zmodyfikowane warianty modelu Woronina łuku elektrycznego. Uwzględnia on swobodne zmiany średnicy kolumny łuku wywołane zmianami natężenia prądu. Z kolei zmiany prądu są spowodowane działającym zmiennym wymuszeniem napięciowym i rozbieżnością elektrod, po których ślizgając się porusza się łuk o zmiennej długości. Wykorzystano dwie różne funkcje aproksymujące średnicę kolumny, w których uwzględniono ekspansję przekroju łuku w okolicach przejścia prądu przez wartość zerową. Drogą symulacji procesów w obwodzie ze źródłem napięciowym i plazmotronem gliding arc wykazano zdolność opracowanego modelu matematycznego do odwzorowywania przebiegów prądu i napięcia w rozciąganym łuku elektrycznym.
PL
Artykuł dotyczy analizy przewodzonych zaburzeń elektromagnetycznych badanych w torze zasilania reaktora plazmowego typu GlidArc. Reaktor jest silnie nieliniowym trójfazowym odbiornikiem. Jego stabilna praca zależy od układu zasilania, a istniejące zaburzenia w układzie mogą wpłynąć na niejednorodność generowania plazmy.
EN
The paper describes the analysis of conducted electromagnetic disturbances in the power supply circuit of plasma reactor. The reactor is strongly non-linear three-phase receiver. Stable work of the reactor depends on the quality of power supply. Existing electromagnetic disturbances in the supply system may affect the heterogeneity of plasma generation.
PL
Przedstawiono wykorzystanie symulacji w diagnostyce warunków destrukcji lotnych związków organicznych z gazu podczas wyładowania barierowego w elemencie wyładowczym. Celem badań było opracowanie procedury modelowania umożliwiającej ujęcie zjawiska generowania plazmy i użycia aktywnych rodników do rozkładu toksycznych cząsteczek. Zastosowanie symulacji w diagnostyce warunków pracy reaktora pozwoli na optymalizację jego konstrukcji i zwiększenie skuteczności oczyszczania gazu.
EN
Application of simulation in the diagnosis of VOC destruction from gas during electric discharge in a discharge element is presented in the paper. The aim of study was to develop a modelling procedure that allows plasma generation and use of active radicals to degrade toxic molecules. The CFD procedure enables one to optimize reactor design and increase of its effectiveness. Simulations can be applied in the diagnosis of reactor's working conditions.
PL
W artykule omówiono zagadnienia związane z problemem tworzyw sztucznych, spotykanych w złomach ZSEE. Wskazano, że materiały te stanowią masowo ok. 30 % całości złomu. Scharakteryzowano najczęściej występujące zastosowania różnych rodzajów tworzyw sztucznych. Omówiono zachowanie się niektórych materiałów w wybranych procesach metalurgicznych.
EN
The article discusses issues related to the problem of plastic found in WEEE scrap. It was pointed out that these materials are about 30 % of the total waste mass. Most commonly applications of different types of plastics were characterized. Also the behaviour of some materials in metallurgical processes was discussed.
PL
Reaktor nietermicznej plazmy jest źródłem zaburzeń zarówno w postaci pola elektromagnetycznego jak i zaburzeń przewodzonych oddziaływujących na system energetyczny. W artykule przedstawiono zagadnienia dotyczące modelowania dławik
EN
Non-thermal plasma reactor is a source of electromagnetic radiated and conducted disturbances. This paper presents the problems of modeling suppression chokes that reduce conducted disturbances, and there dedicated to the supply and the ignition circuit of the GlidArc’s reactor.
EN
New classes of singular fractional continuous-time and discrete-time linear systems are introduced. Electrical circuits are example of singular fractional continuous-time systems. Using the Caputo definition of the fractional derivative, the Weierstrass regular pencil decomposition and Laplace transformation the solution to the state equation of singular fractional linear systems is derived. It is shown that every electrical circuit is a singular fractional systems if it contains at least one mesh consisting of branches with only ideal supercondensators and voltage sources or at least one node with branches with supercoils. Using the Weierstrass regular pencil decomposition the solution to the state equation of singular fractional discrete-time linear systems is derived. The considerations are illustrated by numerical examples.
13
EN
GlidArc - plasma reactor is the source of non-thermal and equilibrium plasma used to the utilization of gas dirts. The reactor is the source of radiated interference emissions around chamber of discharge and around of the power supply module. The reactor is also the source of conducted interferences propagating by the power supply module to the local power system. In this article author introduced the results of the investigations of interferences executed in the circuit of the ignition of the plasma reactor and EMC filter proposed.
PL
Reaktor GlidArc jest źródłem promieniowanych zaburzeń elektromagnetycznych rozłożonych przestrzennie wokół komory wyładowczej jak i źródłem zaburzeń oddziaływujących poprzez tor zasilania na lokalny system energetyczny. W artykule przedstawiono wyniki badań zaburzeń przewodzonych wykonanych w torach roboczych i zapłonu reaktora oraz zaproponowano układy filtrujące.
14
Content available remote Redukcja zakłóceń zapłonowych w reaktorach Gliding Arc
PL
W tekście omówiono system zapłonowy reaktora plazmowego GlidArc wykorzystujący elektrodę zapłonową. Zwrócono uwagę na jego wady i zaproponowano modyfikację sposobu realizacji zapłonu. Realizacja zapłonu z użyciem dwóch elektrod zapłonowych istotnie zmniejsza ilość zaburzeń przewodzonych do obwodów zasilania elektrod roboczych. Przedstawiono wady zaproponowanego rozwiązania i możliwości ich eliminacji.
EN
The text discusses the GlidArc plasma reactors ignition system that uses an ignition electrode. Attention was drawn to its defects and was proposed the modification of the ignition system. Implementation of the ignition with two electrodes significantly reduces the conducted disturbances to power circuitry of working electrodes. Disadvantages of the proposed solution are presented and possibilities of their elimination.
15
Content available remote Modeling discharge length for GA plasma reactor
EN
Determination of the discharge length allows defining conditions for the thermal/non-thermal transition of the gliding arc (GA) discharge and then to determine power system parameters to ensure the non-thermal phase would dominate in the gliding arc discharge cycle. The discharge length can be easily evaluated at the assumption of sinusoidal discharge current and on the basis of simplified model of the power supply-twoelectrode plasma reactor system.
PL
Wyznaczenie długości wyładowania w reaktorze plazmowym pozwala określić warunki przejścia sposobu jonizacji z termicznej na nietermiczną. Korzystne jest uzyskanie nietermicznej nierównowagowej plazmy w największej objętości komory wyładowczej reaktora. Znajomość długości krytycznej, przy której następuje zmiana sposobu jonizacji, pozwala właściwie zaprojektować układ zasilania.
16
Content available remote Filtrowanie zaburzeń przewodzonych toru zapłonu reaktora plazmowego typu GlidArc
PL
Źródłem nietermicznej, nierównowagowej plazmy wykorzystywanej m.in. do utylizacji zanieczyszczeń gazowych są reaktory plazmowe. Reaktor jest źródłem zaburzeń zarówno w postaci pola elektromagnetycznego rozłożonego przestrzennie wokół komory wyładowczej i modułu zasilania jak i źródłem zaburzeń oddziaływujących poprzez tor zasilania na lokalny system energetyczny. W artykule przedstawiono wyniki badań zaburzeń przewodzonych wykonanych w torze zapłonu reaktora oraz zaproponowano układ filtrujący redukujący te zaburzenia.
EN
Plasma reactors are the source of non-thermal and equilibrium plasma used to the utilization of gas dirts. The reactor is the source of radiated interference emissions around chamber of discharge and around of the power supply module. The reactor is also the source of conducted interferences propagating by the power supply module to the local power system. In this article author introduced the results of the investigations of interferences executed in the circuit of the ignition of the plasma reactor and EMC filter proposed.
17
Content available Zagrożenia elektromagnetyczne reaktorów GlidArc
PL
Uprzemysłowienie kraju powoduje ciągłe zwiększenie zanieczyszczeń powietrza. Pociąga to za sobą konieczność stosowania technologii filtrujących i odpylających oraz rozwoju technologii pozwalających na ograniczenie oddziaływania pyłów i gazów na środowisko naturalne. Z uwagi na ich szkodliwy wpływ na ekosystem oraz uwarunkowania prawne, ciągle rozwijane są specjalistyczne technologie i urządzenia neutralizujące niebezpieczną emisję. Wśród nich można wymienić reaktory plazmowe. W prezentowanej pracy przybliżone zostaną zagrożenia jakie może wnosić instalacja reaktora plazmowego o technologicznej nazwie GlidArc na lokalne środowisko elektromagnetyczne. Zaprezentowane zostaną wyniki badań pola elektromagnetycznego emitowanego przez reaktor oraz zaburzeń przewodzonych wprowadzanych do sytemu zasilania.
EN
Industrialization of the country will increase air pollution. This implies the need for dust extraction and filtering technologies. Specialized technology and equipment, neutralizing hazardous emissions are being developed. These include plasma reactors. This paper will present information about the hazards of the installation of the plasma reactor technology GlidArc. That installation can introduce disturbances into the local electromagnetic environment. Article present the results of the electromagnetic field emitted by the reactor and conducted disturbances introduced into the system power supply.
18
Content available remote Zaburzenia promieniowane reaktora plazmowego typu GlidArc
PL
Reaktory plazmowe GlidArc, są wykorzystywane do wytwarzania plazmy niskotemperaturowej. Powstające w nich wyładowania elektryczne są źródłem plazmy i źródłem emisji elektromagnetycznej. W artykule zaprezentowano wartości zmierzonych zaburzeń promieniowanych w zakresie wysokich częstotliwości. Wartości odniesiono do obowiząujcych norm dotyczących urządzeń elektrycznych i przemysłowych.
EN
The plasma reactors ‘GlidArc’ generates the electric discharges whose used to the production of non-thermal plasma. Reactors are the source of plasma and the source of the electromagnetic emission. The article presents values of measured radiated interferences of high frequencies. Values were compared with valid norms.
PL
Artykuł przedstawia zagadnienia związane z pomiarami emisji przewodzonych napięć zaburzeń. Zaprezentowano wyniki pomiarów zaburzeń przewodzonych, wpływ rodzaju gazu roboczego oraz jego przepływności i prądu układu zasilania elektrod roboczych na wartości napięć zaburzeń.
EN
The paper presents issues related to measurements of conducted voltage emission disturbances. presents the results of measurements conducted disturbances the influence the type of working gas and its throughput and power supply system.
20
Content available remote Rozchodzenie się zaburzeń w systemach generacji plazmy łukowej
PL
Praca stanowi wprowadzenie do cyklu badań mających na celu analizę rozchodzenia się zaburzeń w systemach generacji plazmy łukowej. Przeanalizowano poszczególne elementy sytemu wytwarzania plazmy nietermicznej pod kątem generacji zaburzeń, ich oddziaływania na pracę układu zasilającego oraz zmianę parametrów generowanej plazmy.
EN
This paper presents an analysis of disturbances interactions inside the gliding arc plasma generation system. All parts of the nonthermal plasma system are described from the point of view of the disturbances generation, their influence on the power system operation and changes of the plasma parameters.
first rewind previous Strona / 2 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.