Wyniki wyszukiwania - BazTech

1

Image Analysis as a Method of the Assessment of Yarn for Making Flat Textile Fabrics

Idzik Marcin, Idzik Marek

Autex Research Journal

|

2022

|

Vol. 22, no. 2

201--207

EN

During the technological processing of staple fibers into yarn drafting, waves are formed which increase the irregularity of yarn linear density and consequently affect the yarn quality. Even a correctly performed technological process does not allow one to completely eliminate yarn faults (thin and thick places, neps) and yarn irregularity. All the yarn imperfections distinctly become apparent in flat textiles made of such a yarn. The quality of the yarn produced should be assessed already in spinning mill, using the results obtained to conclude on the quality of woven or knitted fabrics. Modern metrological laboratories in spinning mills possess Uster Tester 5 (UT5) apparatuses that not only assess the yarn quality with respect to the irregularity of linear density, faults (thin and thick places, neps), or hairiness, but also using the test results obtained make it possible to create a digital image of the predicted appearance of a flat fabric made of the yarn tested. This article presents a computer-aided method of the analysis of the woven and knitted fabric images obtained from UT5 that allows one to assess the significance of particular yarn parameters in the predicted appearance of flat fabrics.

2

Yarn Damage Evaluation in the Flat Knitting Process

Iqbal Waqar, Jiang Yaming, Qi Ye-xiong, Xu Lei

Autex Research Journal

|

2021

|

Vol. 21, no. 3

272--283

EN

Textile yarns are subjected to numerous types of forces during knitting, usually leading to yarn damages, such as decrease in tensile, bending, shearing, and surface properties, which are closely related to different yarn properties, knitted structures/actions, and machine settings. This article comprehensively evaluated yarn damages in the computerized flat knitting process. Five different commercially available and commonly used yarns including cotton, wool, polyester, acrylic, and viscose were selected as raw materials, and the tensile, bending, shear, and frictional properties were investigated and compared before knitting and after being unraveled from plain- and rib-knitted fabrics, respectively. The results show that knitting actions/structures exhibit different damage extents for all different raw materials. It has been observed that the modulus is declined by 3–30% for bending, 2–10% for tensile, and 8–80% for shearing due to flat knitting action, respectively. The frictional coefficient of yarns also increased from 6 to 23%. As compared to yarn before knitting, the yarns unroved from plain and rib structures have been damaged to a great extent as a result of the loss of mechanical properties. The results are completely in agreement with the statistical analysis that clearly represents the significant loss in yarn properties during the knitting process. The microscopic analysis of the yarns clearly illustrates the effect of knitting action on yarn surface and mechanical properties. For yarn’s cross-sectional shearing properties testing, this article self-designed an innovative “Yarn Shear Testing Device.” The methodology and results are of great importance for improving the quality of knitted products, evaluating knitting yarns’ knittability, and in the development of high-performance technical textiles.

3

Effect of a Subjective Grading System and Blending with Polyester on Selected Wool and Yarn Characteristics of Subtropical Egyptian Barki Sheep

Helal Ahmed, Agamy Rania, Gad Allah Aymen A. I., Al-Betar Essam M., Mahouda Sabry F., Abdel-Mageed Ibrahim I.

Fibres & Textiles in Eastern Europe

|

2019

|

Vol. 27, no. 5 (137)

23--27

EN

Seven-hundred kilograms of subtropical Barki wool was collected to study the effect of a subjective grading system and blending with polyester on selected wool and yarn characteristics. Wool was graded subjectively into coarse, fine and raw; then each grade was blended with 0%, 15%, 25%, 35% and 45% of polyester. Staple and yarn strengths were higher in both coarse and fine grades compared with raw wool. Staple elongation of the fine grade reached 3 times that of coarse grade and twice as much as raw grade. Also, in the 100% wool blend, yarn elongation of the fine grade was twice as much as both coarse and raw grades. The fine grade had the highest yarn friction, followed by other grades. Generally, adding polyester to coarse and fine grades led to an improved yarn strength compared with the raw grade. Adding 15% polyester caused the highest improvement among other percentages. Correlations among traits were also discussed.

PL

Do badań wykorzystano 700 kg wełny. Dokonano oceny wybranych właściwości wełny i przędz mieszanych wełna/poliester. Wełna była oceniana subiektywnie na grubą, cienką i surową; następnie każdy gatunek został zmieszany z 0%, 15%, 25%, 35% i 45% poliestru. Zbadano wytrzymałość, wydłużenie i współczynnik tarcia przędz. Stwierdzono, że, dodawanie poliestru do grubych i cienkich włókien wełnianych prowadziło do polepszenia wytrzymałości przędz w porównaniu do przędz z włókien surowych. Największą poprawę właściwości spowodowało dodanie 15% poliestru. Omówiono również korelacje między cechami.

4

The Analysis of Structure and Physicochemical Properties of Yarns Used for Manufacturing Hernia Meshes

Draczynski Z., Chmielewska M., Bogun M., Sujka W.

Autex Research Journal

|

2019

|

Vol. 19, no. 2

119--126

EN

The article presents a comparative analysis of the yarns used for manufacturing hernia meshes. For the analysis, two different linear masses, 46 dtex and 72 dtex, of transparent and dyed yarns were used; the dye used in the yarns was adequate for their intended use. The DSC tests showed the influence of thermal treatment on the change of thermal properties of the yarns. At the same time, it was proved that the aforementioned treatment had a bearing on the changes of crystallinity degree. All types of yarns were also subjected to physicochemical tests required for all the materials used for the production of hernia meshes.

5

Interrelation Between Tensile Properties of Yarns and Woven Fabrics with These Yarns

Kumpikaitė Eglė, Tautkutė-Stankuvienė Indrė, Redeckienė Dovilė

Autex Research Journal

|

2019

|

Vol. 19, no. 4

387--393

EN

The main parameters of tensile tests for fabrics and yarns are the breaking force and the elongation at break. The aim of this investigation was to find the relation between the tensile properties of yarns and woven fabrics for different natural raw materials. Manmade bamboo, natural single flax, blended plied flax and natural silk yarns, plied combed cotton yarns, blended plied cotton, and polyester yarns were used for the research. The warp of almost all fabrics, except of one fabric, was from flax. This fabric was woven using blended flax and silk yarns in the warp. Weft yarns were more various – yarns of one kind were used in the weft for certain fabrics; yarns of two kinds were used in 1:1 repeats in other fabrics. It was established that the breaking force for both woven fabrics and yarns increases when the elongation at break increases. The relationships between the tensile parameters of yarns and woven fabrics were established. The results showed weak dependence between the tensile parameters of yarns and fabrics because the coefficients of determination of the dependences are small.

6

A New Simplified Model for Predicting the UV-Protective Properties of Monofilament PET Fabrics

Kostajnšek Klara, Urbas Raša, Dimitrovski Krste

Autex Research Journal

|

2019

|

Vol. 19, no. 3

263--270

EN

Knowing the reflection, transmission, and absorption properties of the yarns from which the woven fabric is made, prediction of a fabric’s UV-protective properties is simple. Using the geometrical properties of monofilament yarns and fabrics, which were determined optically, and following the cover factor theory, we have determined the areas of fabrics covered with no yarns, only one yarn, and two yarns. From a special selected set of high-module polyethylene terephthalate (PET) monofilament materials (e.g., fabrics), we have elaborated a method for determining the reflection, transmission, and absorption of yarns. By first defining the differently covered areas of fabrics, we were able to use them in a mathematical model for calculating and predicting the UV-protective properties of the fabrics. The calculated and measured values of the UV-protective properties of the selected test fabrics were highly correlated, with a correlation coefficient >0.98.

7

Analysis of Functional Properties of Knitted Fabrics Made of Alpaca Wool and Other Fibres

Czaplicki Z., Mikołajczyk Z., Prążyńska A.

Fibres & Textiles in Eastern Europe

|

2018

|

Vol. 26, no. 3 (129)

52--59

EN

The article presents research results on selected properties of knitted products made of alpaca wool and other raw materials. Special attention was paid to properties defining thermal comfort. The material studied were weft-knitted fabrics made of four different yarns: cotton, PAN, sheep wool and alpaca wool. All knitted fabrics were made with different stitches in five variants on a computer controlled knitting machine – Stoll CHS 530 HP. Warmth retention was evaluated using an Alambeta device. The properties tested were as follows: thermal conductivity, thermal diffusivity, thermal absorption, thermal resistance and air permeability. Results concerning the functional properties of the knitted fabrics made of alpaca wool were compared with those obtained for other materials. Generally knitted fabrics made of alpaca wool were positively evaluated.

PL

W artykule przedstawiono wyniki badań wybranych właściwości użytkowych dzianych wyrobów wykonanych z wełny alpaki i innych surowców. Materiał badań stanowiły dzianiny rządkowe wykonane z czterech przędz: bawełnianej, PAN, wełny owczej i wełny alpaki. Wszystkie dzianiny wykonano o różnych splotach w pięciu wariantach na szydełkarce komputerowej firmy Stoll CHS 530 HP. Ocenę ciepłochronności dzianin przeprowadzono za pomocą aparatu Alambeta. Badano: przewodność cieplną, dyfuzyjność cieplną, absorpcyjność cieplną, opór cieplny oraz przepuszczalność powietrza. Dokonano porównania otrzymanych wyników właściwości użytkowych dzianin z wełny alpaki w odniesieniu do dzianin z trzech innych surowców. W ogólnej ocenie dzianiny wykonane z wełen alpaki wypadły dość korzystnie.

8

Kinetics of photoelectrocatalytic degradation of diclofenac using N, S co-doped TiO2 nano-crystallite decorated TiO2 nanotube arrays photoelectrode

Cui Y., Deng X., Ma Q., Zhang H., Cheng X., Li X., Xie M., Cheng Q., Li B.

Environment Protection Engineering

|

2018

|

Vol. 44, nr 2

117-130

EN

As a non-steroidal anti-inflammatory drug, diclofenac, was commonly used as analgesic, antiarthritic and antirheumatic, and has frequently been detected in municipal wastewater treatment plants (MWTPs) effluents and demonstrated to be potentially environmental risk on human beings. In the present study, N, S co-doped TiO2 nano-crystallites decorated TiO2 nano-tube arrays (N, S-TiO2 NCs/TiO2 NTAs) photoelectrode was used to degrade diclofenac containing wastewater. In addition, the effects of some critical parameters including initial pH, external positive potential, sodium sulfate concentration and initial diclofenac concentration on the photoelectrocatalytic (PEC) degradation of diclofenac containing wastewater and dynamic characteristics were investigated systematically. Results showed that N, S-TiO2 NCs/TiO2 NTAs photoelectrode exhibited high PEC efficiency for the degradation of diclofenac, in which the PEC processes fitted well with the Langmuir–Hinshelwood (L–H) model. Furthermore, external additional anions such as Cl–, ClO– and NO3 – played an important role in inhibiting the degradation of diclofenac. Also, the N, S-TiO2 NCs/TiO2 NTAs photoelectrode possessed good stability for consecutive applications for degradation of diclofenac, which could potentially be utilized in wastewater treatment.

9

Long Path Towards to Success in Electrospun Nanofiber Yarn Production Since 1930’s: A Critical Review

Göktepe F., Buzol Mülayim B.

Autex Research Journal

|

2018

|

Vol. 18, no. 2

87--109

EN

Direct conversion of nanofibers into a yarn formed by electrospinning has begun to draw attention recently while pioneering attempts in fact go back to 1930s. Once nanofiber yarns are spun successfully by electrospinning, obviously, this would open new gates for many different applications. However, this is still a challenging task and there is no system accepted universally yet. There are more than 20 different approaches available so far but with serious limitations. In this review, they were categorized as (i) systems for production of parallel bundle of nanofibers and (ii) systems for production of twisted nanofiber yarns, presenting potential applicability of each with a critical point of view. The results show that some of the attempts mainly present basic conceptual ideas only. There are some works to produce real twisted nanofiber yarns continuously while mainly funnel, disc, or ring collectors have been used as the twisting element. However, there is limited information regarding stability of spinning system or control of yarn properties. This review also analyses the technical properties of electrospun nanofiber yarns summarizing the available data in terms of yarn properties such as fiber fineness, twist, production speed, mechanical properties, polymer types, and other important parameters available.

10

Development of V-Shaped Compression Socks on Conventional Socks Knitting Machine

Siddique H. F., Mazari A. A., Havelka A., Mansoor T., Ali A., Azeem M.

Autex Research Journal

|

2018

|

Vol. 18, no. 4

377--384

EN

The aim of this study was to develop V-shape compression socks that should exert graduated lateral compression around the leg. For the development of socks, three types of yarns: main yarn (MY), plaiting yarn (PY) and inlaid yarn (IY) were used. Each yarn contained spandex yarn as the core. Machine adjustments were optimized to achieve the special V-shaped compression socks according to size of the wooden leg. Eighteen socks samples were developed and quantified for pressure exertion at ankle and calf portions using the MST MKIV, Salzmann pressure measuring device. Consequently, only two socks samples were accepted, which had the pressure exertion values of 21 mmHg and 23 mmHg with graduation percentage of 73% and 80%, respectively.

11

Preparation of Conductive Polyethylene Terephthalate Yarns by Deposition of Silver & Copper Nanoparticles

Ahmad S., Ashraf M., Ali A., Shaker K., Umair M., Afzal A., Nawab Y., Rasheed A.

Fibres & Textiles in Eastern Europe

|

2017

|

Vol. 25, no. 5 (125)

25--29

EN

The assemblage of textiles and electronics in a single structure has led to the development of smart textiles for functional purposes and special products. Conductive yarn as a necessary component of smart textiles is being developed by a number of techniques. The objective of the current study was to impart conductivity to yarn by coating the silver and copper nanoparticles on the surface of multifilament polyester textile fibres. The surface morphology and electrical conductivity of the coated yarns were investigated. The wash ability of the conductive yarns developed was also studied. The yarns showed good retention of the nanoparticles, as proven by the very small loss of the conductivity of the material.

PL

Połączenie tekstyliów i elektroniki w jednej strukturze doprowadziło do rozwoju inteligentnych tekstyliów znajdujących zastosowanie w celach funkcjonalnych i produktach specjalnych. Przędza przewodząca, jako niezbędny składnik inteligentnych wyrobów włókienniczych, może być otrzymywana za pomocą szeregu różnych technik. Celem badania było nadanie przewodnictwa przędzy poliestrowej poprzez powlekanie jej nanocząsteczkami srebra i miedzi. Zbadano morfologię powierzchni i przewodnictwo elektryczne powleczonych przędz, a także ich odporność na pranie. Przędze wykazywały dobrą retencję nanocząstek, co potwierdzała bardzo mała utrata przewodności materiału.

12

Porosity of Knitted Fabrics in the Aspect of Air Permeability - Discussion of Selected Assumptions

Havlová M., Špánková J.

Fibres & Textiles in Eastern Europe

|

2017

|

Vol. 25, no. 3 (123)

86--91

EN

The main focus of this paper is to look into the relationship between the structure and air permeability of single jersey knitted fabric – especially verifying some basic assumptions. First, if it is possible to neglect the permeability of yarns themselves when we evaluate that of knits, and second, if yarn hairiness plays a significant role when we evaluate the relationship between air permeability and the porosity of knits. Theoretical calculations and experiments which were performed using an analysis of microscopic images of the structure of textile materials are used for the determination of inter-yarn and intra-yarn porosity. The paper aims to show that the characteristic dimension of inter-yarn pores is significantly higher than that of intra-yarn pores, and also that the values of inter-yarn porosity measured using image analysis methods with hairiness and after the removal of hairiness are statistically significantly different. The correlation coefficients for the porosity values measured and calculated are very high.

PL

Głównym celem opracowania było spojrzenie na zależność pomiędzy strukturą a przepuszczalnością powietrza dzianin, w szczególności zweryfikowanie niektórych podstawowych założeń. Po pierwsze, czy podczas oceny przepuszczalności powietrza dzianiny możliwe jest pominięcie przepuszczalności powietrza przędzy, z której została ona wykonana? Po drugie, czy włochatość przędzy odgrywa istotną rolę w ocenie zależności pomiędzy przepuszczalnością powietrza a porowatością dzianin? Obliczenia teoretyczne i wyniki badań, które zostały przeprowadzone przy użyciu analizy mikroskopowych obrazów struktury materiałów włókienniczych, wykorzystano do określania porowatości przędzy. Współczynniki korelacji dla zmierzonych i wyliczanych wartości porowatości były bardzo wysokie.

13

Study of the Contact Resistance of Interlaced Stainless Steel Yarns Embedded in Hybrid Woven Fabrics

Vasile S., Deruck F., Hertleer C., De Raeve A., Ellegiers T., De Mey G.

Autex Research Journal

|

2017

|

Vol. 17, no. 2

170--176

EN

The contact resistance of two interlacing electro-conductive yarns embedded in a hybrid woven fabric will constitute a problem for electro-conductive textiles under certain circumstances. A high contact resistance can induce hotspots, while a variable contact resistance may cause malfunctioning of the components that are interconnected by the electro-conductive yarns. Moreover, the contact robustness should be preserved over time and various treatments such as washing or abrading should not alter the functioning of the electro-conductive textiles. The electrical resistance developed in the contact point of two interlacing electro-conductive yarns is the result of various factors. The influence of diameter of the electro-conductive stainless steel yarns, the weave pattern, the weft density, and the abrasion on the contact resistance was investigated. Hybrid polyester fabrics were produced according to the design of experiments (DoE) and statistical models were found that describe the variation of the contact resistance with the selected input parameters. It was concluded that the diameter of the stainless steel warp and weft yarns has a statistically significant influence on the contact resistance regardless of the weave. Weft density had a significant influence on the contact resistance but only in case of the twill fabrics. Abrasion led to an increase in contact resistance regardless of the weave pattern and the type of stainless steel yarn that was used. Finally, a combination of parameters that leads to plain and twill fabrics with low contact resistance and robust contacts is recommended.

14

Woven Fabrics Containing Hybrid Yarns for Shielding Electromagnetic Radiation

Marciniak K., Grabowska K., Stempień Z., Ciesielska-Wróbel I., Rutkowska A., Taranek D.

Fibres & Textiles in Eastern Europe

|

2016

|

Vol. 24, no. 6 (120)

109--115

EN

The aim of the study was to verify whether the construction of a specific hybrid yarn containing a ferromagnetic core and electroconductive wire introduced into woven fabric will improve the shielding effectiveness (SE) in comparison with reference fabrics made of the same raw materials but introduced into woven fabrics as plain wefts, not twisted into the hybrid yarn. Hybrid yarn made of electroconductive materials allows the creation of a set of solenoids with a ferromagnetic core made of steel yarn and a solenoid of conductive effect yarns made of copper. The woven fabric made of these yarns placed into an alternating electromagnetic field (EMF) exhibits a phenomenon where an alternating electric voltage is generated between the ends of the copper solenoid, and alternating magnetisation of the ferromagnetic core takes place. Twelve fabrics were produced, nine of which differed in the density with which the hybrid yarns were introduced as wefts, i.e. once every 25×2 tex cotton yarn, every two cotton yarns, and every three cotton yarns, and the remaining three were reference fabrics, without hybrid yarn. It was found that if measured at a frequency of 30 MHz, the fabrics containing hybrid yarns had 60% higher SE than the reference ones.

PL

Celem pracy była weryfikacja czy budowa wybranych przędz hybrydowych zawierających materiał ferromagnetyczny, wprowadzonych do tkanin może poprawić skuteczność ekranowania (EE) tych tkanin w porównaniu do tkanin referencyjnych wykonanych z tych samych surowców co tkaniny zawierające przędzę hybrydową, jednak niezawierających przędz hybrydowych a jedynie materiały, z których przędza hybrydowa jest wykonana, a zostały one wprowadzone do tkanin jako niepołączone z sobą w hybrydę wątki. Przędze hybrydowe zostały wykonane z materiałów elektroprzewodzących w taki sposób, że na swej powierzchni mają zestaw solenoidόw posiadających jako rdzeń materiał ferromagnetyczny –stal nierdzewną, natomiast oplotem przędzy był składnik wykonany z materiału elektroprzewodzącego-miedzi. Tkaniny wykonane z tych przędz, umieszczone w zmiennym polu elektromagnetycznych (PEM) wykazują zjawisko indukowania prądu zmiennego w komponencie wykonanym z miedzi oraz zmiennego magnetyzowania elementu wykonanego ze stali nierdzewnej. Wykonano dwanaście tkanin, spośród których dziewięć charakteryzowało się różną częstotliwością wprowadzania przędz hybrydowych jako wątków do tych tkanin, np. jedna przędza hybrydowa co każdą przędzę bawełnianą 25x2 tex, jedna przędza hybrydowa, co dwie i co trzy przędze bawełniane. Pozostałe trzy tkaniny referencyjne, nie posiadały wątków w postaci przędz hybrydowych. Stwierdzono, iż przy pomiarze w zmiennym polu elektromagnetycznych o częstotliwości 30 MHz, tkaniny posiadające przędzę hybrydową wykazują o 60% większą ogólna zdolność ekranowania niż w przypadku tkanin referencyjnych.

15

Strain Monitoring in Woven Fabrics with Locally Induced Mass Irregularities Using an Image Based Method

Baghernezhad S., Ghane M., Moezzi M.

Fibres & Textiles in Eastern Europe

|

2016

|

Vol. 24, no. 2 (116)

73--80

EN

The aim of this work was to study the effect of induced mass irregularities of yarn on the strain monitoring of fabric during a tensile test. Slub yarns with different induced mass irregularities were produced and used as weft yarns in plain woven fabric. The Digital Image Correlation (DIC) method was used to evaluate the strain distribution map of the fabric during the tensile test. Images of the reference sample as well as of the strained fabric under the sequential strain applied were captured. By applying the DIC method, a strain distribution map of the fabric at a certain value of the strain applied was calculated for all samples. Results of the strain map calculated were then compared with the image of the actual fabric. It was found that there was good agreement between the map of strain distribution calculated by DIC and the local concentration of strain in the fabric. The results also revealed that the variation in strain distribution in the fabric during the tensile test was correlated exponentially to the breaking stress in cN/tex) of yarn as well as the breaking strength in N of the fabric.

PL

Celem pracy było badanie efektu prowadzonych nierównomierności masy liniowej przędzy na badanie odkształcenia tkanin podczas testów wytrzymałościowych. W wątku zastosowano przędze fantazyjne pęczkowe o różnym rozkładzie masy liniowej dla wyprodukowania tkanin o splocie płóciennym. Zastosowano metodę cyfrowej korelacji obrazu dla oceny rozkładu odkształceń. Wykonano mapy rozkładu odkształceń podczas testów wytrzymałościowych. Mierzono i porównywano obrazy próbek wzorcowych. Stwierdzono dobrą zgodność pomiędzy mapami rozkładu odkształceń obliczonymi teoretycznie i potwierdzonymi eksperymentalnie. Zmiany w rozkładzie odkształceń w tkaninie podczas testów wytrzymałościowych wykazały, że istnieje zależność wykładnicza pomiędzy odkształceniami a naprężeniami zrywającymi w cN/tex, oraz siłą zrywającą w N.

16

Static and Fatigue Strength of Linear Textile Products

Włochowicz A., Kukla S., Drobina R.

Fibres & Textiles in Eastern Europe

|

2016

|

Vol. 24, no. 3 (117)

8--16

EN

This publication is a review of the work directed or inspired by the late Professor Andrzej Włochowicz in comparison to the current state of knowledge, and developed by his colleagues as an expression of memory and recognition of the contribution that he made to research on the strength of linear textile products. The article describes issues related to the fatigue strength of yarns. An analysis of literature related to the development of research on fatigue strength was carried out, and quantities describing load cycles and selected cases of periodically variable states of loads are presented. The article attempts to systematise certain problems related to the fatigue of textile materials. The body of the article presents the state of knowledge as well as the manner and the methods of assessment of the fatigue strength of textile materials.

PL

Prezentowana publikacja jest przeglądem prac kierowanych lub inspirowanych przez nieżyjącego Profesora Andrzeja Włochowicza na tle obecnego stanu wiedzy a opracowana przez jego współpracowników, jako wyraz pamięci i uznania dla wkładu, który wniósł do badań wytrzymałości liniowych wyrobów włókienniczych. W artykule opisano zagadnienia związane z wytrzymałością zmęczeniową przędz. Dokonano analizy literatury przedmiotu związanej z rozwojem badań nad wytrzymałością zmęczeniową, przedstawiono wielkości charakteryzujące cykle obciążeń oraz wybrane przypadki okresowo zmiennych stanów obciążeń. W artykule podjęto próbę naukowego usystematyzowania pewnych problemów związanych ze zmęczeniem materiałów włókienniczych. W głównej części artykułu zaprezentowano stan wiedzy oraz sposób postępowania i metody oceny wytrzymałości zmęczeniowej wyrobów włókienniczych.

17

Natural modified starch and synthetic sizes in function of characteristics of sized yarn

Kovačević S., Dorđević S., Dorđević D.

Fibres & Textiles in Eastern Europe

|

2016

|

Vol. 24, no. 1 (115)

56--66

EN

The aim of this study was to investigate the changes in properties of yarn made by sizing with synthetic and natural modified corn starch. Different procedures for obtaining modified natural (corn) starch and various combinations of natural and synthetic sizes were used to explore the differences in the properties of sized yarn. The sizing process was carried out under with constant conditions in a newly developed laboratory sizing machine on twisted cotton yarns of 20×2 tex and 30×2 tex. According to the results obtained, yarn sized with synthetic sizes has substantially better properties than those which are naturally sized with modified starch. However, sometimes these differences are not significant or they do not exist at all. Twisted yarn is not always necessary in sizing in order to increased its strength but rather to protect the surface from wear and refine projecting fibers; in this case natural modified starch from corn can meet the requirements. The significance of this research is the application of natural sizes, improvement of the sizing process with natural modified sizes using new achievements in the development of the sizing process, and thus creating a positive environmental and economic impact.

PL

Celem pracy było zbadanie zmian właściwości przędz preparowanych preparacjami syntetycznymi i z naturalnie modyfikowanej skrobi. Proces nanoszenia preparacji przeprowadzono przy zachowaniu stałych warunków nowo zbudowanej laboratoryjnej maszynie. Obrabiano skręcane przędze bawełniane o masie liniowej 20 × 2 tex i 30 × 2 tex. Zgodnie z otrzymanymi wynikami przędze preparowane preparacją syntetyczną miały zdecydowanie lepsze parametry od przędz z preparacją opartą na modyfikowanej skrobi. Jednakże czasami różnice te nie determinują konieczności zastosowania preparacji syntetycznej zwłaszcza w sytuacji kiedy nie jest wymagane uzyskanie maksymalnej wytrzymałości a istotne są elementy ochrony środowiska i koszty produkcji.

18

Investigation of Staple Yarns Modified by the Physical Vapour Deposition Method

Niewiadomska I., Frydrysiak M., Puchalski M., Czekalski J.

Fibres & Textiles in Eastern Europe

|

2016

|

Vol. 24, no. 3 (117)

32--37

EN

The aim of the research presented in this paper was to develop a technology for obtaining electrocondauctive yarns using the physical vapour deposition (PVD) technique, as well as methods for testing the yarns. The authors presented a method of production of metallic coatings for staple and continuous yarns with the use of PVD processes which enabled the production of yarns with electroconductive properties. The article also presents the properties of yarns after the PVD modification processes and the sustainability of these properties after utility testing such as laundry, bending and abrasion. Yarn thermographic analysis, which reflected the quality of the outer metallic layers, is also presented.

PL

W publikacji przedstawiono metodę wytwarzania powłok metalicznych na przędzach odcinkowych i ciągłych przy zastosowaniu procesów PVD, co umożliwiło wytworzenie przędz o właściwościach elektroprzewodzących. Zbadano właściwości elektroprzewodzące po modyfikacji przędz procesami PVD oraz trwałość tych właściwości po testach użytkowych takich jak pranie, zginanie i ścieranie. Na podstawie analizy termodynamicznej wytworzonych przędz określono jakość naniesień w szczególności ich równomierność. Opisano wykonane stanowiska badawcze dla pomiaru oporności i badań termowizyjnych.

19

Effect of Knitted Loop Length on the Fluctuation Amplitude of Yarn Fed into a Circular Weft-Knitting Machine using a New Opto-Electro Device

Heravi M E M, Najar S S, Moavenian M, Yazdanshenas M E

Fibres & Textiles in Eastern Europe

|

2014

|

Vol. 22, no. 4 (106)

81--86

EN

The present paper investigates the effects of knitted loop length on yarn fluctuation amplitude during feeding into a circular knitting machine. Variation of yarn tension causes a change in the loop length and yarn fluctuation amplitude. In order to study the behaviour of the yarn fluctuation amplitude during the feeding process, a new optical IR electronic monitoring system was designed and developed. Experiments were carried out on an industrial single jersey knitting machine with a plain knitted pattern and polyester 150 denier continuous filament yarn for three different knitted loop lengths. Evaluating the fluctuation amplitudes recorded by analysis of variance revealed that an increase in the loop length will cause a highly significant decrease in the yarn fluctuation amplitude.

PL

Zmiany naprężenia przędzy powodują zmianę w długości oczka i fluktuację amplitudy przędzy. W celu zbadania zachowania się przędzy podczas zmian amplitudy w czasie procesu wprowadzania przędzy do maszyny opracowano i wykonano nowy elektroniczno-optyczny (IR) system monitoringu. Badania przeprowadzono na przemysłowej dziewiarce dla dzianin o splocie lewo prawym stosując przędzę z ciągłych włókien poliestrowych o masie liniowej 150 dtex. Stosowano trzy różnej długości oczka. Ocena zarejestrowanych fluktuacji amplitudy oraz analiza wariancyjna wykazały że wzrost długości powoduje bardzo wyraźny spadek fluktuacji amplitudy przędzy.

20

Moisture Absorption and Desorption in Flax and Hemp Fibres and Yarns

Mustata A., Mustata F. S. C.

Fibres & Textiles in Eastern Europe

|

2013

|

Vol. 21, no. 3 (99)

26--30

EN

The aim of this paper is to present research work about the mode in which the water sorption- desorption process is influenced by the type of spinning yarns (dry or wet) and by the type of roving treatment (boiling or bleaching) in the case of flax and hemp yarns. The hygroscopic properties of fibres, yarns and woven fabrics from flax and hemp boiled or bleached were investigated at different relative humidities. The saturation limit of moisture absorption of the fibres varies depending on the source as well as pre-treatment of the sample. The effect of water quantity absorbed on the electrical resistance of the fibres and yarns and on the mechanical properties was examined.

PL

Przedstawiono badania dotyczące sorpcji i desorpcji wilgoci włókien, przędz i tkanin gotowanych i bielonych prowadzone w warunkach różnej wilgotności względnej. Badano również wpływ absorpcji wody na oporność elektryczną włókien i przędz oraz wpływ na ich właściwości mechaniczne.