This research presents a comparative study of the colour, abrasion and colour fastness properties of plain knitted fabrics made from 100% modal viscose fibres in different fibre finenesses such as microfibre and conventional fibre, their 50/50 blends with cotton fibre and 100% cotton fibre. Abrasion behaviours of the fabrics were assessed by measuring the weight loss and colour values after four different abrasion cycles. All the results were compared with respect to both the fibre fineness and blend proportion of cotton fibre in the fabrics. The L* and K/S values of the fabrics after abrasion reveal a similar tendency to that of the fabrics before abrasion. Before and after abrasion cycles, the fabrics with microfibre revealed lower K/S and C* values and higher L* values than those with conventional fibre. With an increase in the cotton amount, the K/S values of the fabrics decrease and the L* values of the fabrics increase.
PL
Badania przedstawiają porównawczą analizę koloru, trwałości koloru i odporności na ścieranie dzianin lewo-prawych wykonanych w 100% z modalnych włókien wiskozowych o różnej masie liniowej w tym włókien konwencjonalnych i mikrowłókien, jak również mieszanych z włóknami bawełnianymi w proporcji 50/50 oraz z 100% włókien bawełnianych. Zachowanie dzianin na ścieranie oceniano mierząc utratę masy oraz charakterystykę koloru po czterech różnych cyklach ścierania. Stwierdzono istotne różnice pomiędzy dzianinami wykonanymi z włókien konwencjonalnych i mikrowłókien oraz pomiędzy dzianinami wykonanymi z włókien wiskozowych i z bawełny.
2
Dostęp do pełnego tekstu na zewnętrznej witrynie WWW
This paper focuses on the dimensional and selected physical properties of a series of plain jersey fabrics made from viscose siro-spun and carded ring yarns of 2/10 tex and 20 tex, respectively. Elastane yarn was incorporated into the fabric using the plaiting technique. In general, for both greige and dyed knitted fabrics, the stitch density decreased, whereas the weight increased as the stitch length increased. Moreover, for greige and dyed dry-relaxed fabrics from siro yarn, the twist had an influence on fabric properties, the effect being relatively more prominent for slack samples. Moreover, both slack and tight dry relaxed dyed samples from high twist siro yarns featured lower resistance to abrasion. As far, as dyed and laundered samples from siro yarns are concerned, the results revealed that irrespective of the loop length, the samples from average twist siro yarns tended to give a higher stitch density and weight values. When abrasion resistance values of samples from both average and high twist siro yarns were studied, it could be suggested that in addition to yarn properties, the effect of fabric properties on the abrasion behavior of the samples became more prominent after laundering. As far as the abrasion resistance and pilling properties of the samples are concerned, the fabrics from siro-spun yarns tended to perform better. Finally, the pilling test method employed affected not only the size and shape of the pill entanglements on the surface of the samples but also the degree of fibre damage within the fuzz entanglements.
PL
W pracy omówiono właściwości geometryczne i wybrane parametry fizyczne serii dzianin lewo-prawych wykonanych z przędz wiskozowych typu siro-spun i zgrzeblonych przędz obrączkowych o masie liniowej 2/10 tex i 20 tex. Przędze elastomerowe zostały wprowadzone w dzianinę metodą wplecenia. Ogólnie można powiedzieć, że zarówno dla dzianin surowych jak i barwionych gęstość splotów maleje podczas gdy ciężar powierzchniowy wzrasta wraz ze wzrostem długość splotu. Ponadto, dla surowych i barwionych dzianin z przędzy „siro” relaksowanych w stanie suchym, skręt przędzy ma wpływ na parametry dzianiny. Efekt ten jest bardziej widoczny w przypadku dzianin luźnych. Ponadto dzianiny luźne jak i ścisłe relaksowane w stanie suchym wykonane z przędz typu „siro” o dużym skręcie wykazują mniejsza odporność na ścieranie. Biorąc pod uwagę próbki barwione i prane z przędz „siro, wyniki wskazują, że niezależnie od długości oczka, próbki wykonane z przędz o średniej wartości skrętu posiadają wyższą gęstość splotów oraz większy ciężar powierzchniowy. Biorąc pod uwagę odporność na ścieranie próbek wykonanych z przędz o średniej i dużej wartości skrętu można zasugerować, że efekt wpływu właściwości dzianin na odporność na ścieranie jest bardziej widoczny po praniu. Uwzględniając odporność na ścieranie i piling dzianin można powiedzieć, że dzianiny z przędz „siro” wykazują lepsze właściwości. Metoda sprawdzania pilingu ma istotne znaczenie nie tylko na wielkość i kształt pil i sposób splątania włókien ale również na stopień zniszczenia włókien.
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.