Ograniczanie wyników
Czasopisma help
Autorzy help
Lata help
Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 167

Liczba wyników na stronie
first rewind previous Strona / 9 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  mining damage
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 9 next fast forward last
PL
W pracy syntetycznie omówiono skutki eksploatacji ujawniające się na powierzchni terenu oraz zasady ochrony istniejącej zabudowy terenu górniczego nieprzystosowanej do przenoszenia wpływów eksploatacji górniczej. Przedstawiono typowe zabezpieczenia oraz naprawy budynków narażonych na działanie ciągłych deformacji górotworu. Przeanalizowano aspekty dotyczące zasad bezpieczeństwa w trakcie realizacji robót typowych mających na celu wzmacnianie bądź naprawę budynków narażonych na skutki wpływów eksploatacji.
EN
This paper provides a synthetic overview of the effects of mining operations that become evident on the surface of the terrain and principles for protecting the existing construction in mining areas that are not adapted to withstand the influence of mining activities. Typical protections and repairs for buildings exposed to continuous rock deformations are presented. The aspects concerning safety principles during the implementation of typical works aimed at strengthening or repairing buildings affected by the effects of mining activities have been analyzed.
PL
W artykule opisano historię techniczną mostu w Krzyżowicach. Obiekt intensywnie osiadał, ale brak było istotnych przemieszczeń na łożyskach. Górnicze osiadanie terenu spowodowało znaczne zmniejszenie światła pionowego, tj. obniżenie mostu względem zwierciadła rzeki, konieczna była przebudowa mostu. Po przebudowie mostu wydłużono ściany górnicze poza obiekt, w krótkim czasie doszło do znacznych zmian w położeniu przyczółków. W artykule opisano starą konstrukcję mostu, nową konstrukcję mostu, podano wyniki długoletnich obserwacji i pomiarów oraz wskazano, jak należy projektować zabezpieczenia na wpływy górnicze w przypadku nietypowych wymuszeń górniczych.
EN
Article describes the technical history of a bridge in Krzyżowice. The object settled intensively, but there were no significant displacements on the bridge bearings. Mining subsidence caused a significant reduction in vertical light, i.e. lowering the bridge in relation to the river level, it was necessary to rebuild this bridge. After the reconstruction of the bridge, mining walls were extended beyond the object, in a short time there were significant changes in the position of the abutments. The article describes old bridge construction, new bridge construction, gives the results of long-term observations and measurements, and indicates how to design protection against mining influences in the case of unusual mining impacts.
EN
In Czech Republic the question of mining damage is solved in the Mining Act, the Mining Activity Act and the Civil Code. Mining damage is understood as damage to the property of the third parties, which was caused by mining activity. Compensation for damage is typically by compensation, financial compensation or restoration. It is possible to cover damage not only after its occurrence but also in advance, before it will happen. Settlement of mining damage is a matter of agreement between the organization and the injured party; any disputes are resolved by courts. To ensure a sufficient quantity of money for the settlement of mining damages, so-called "reserves" were introduced. They must correspond to the needs of the actual execution of the works. Closely related to the issue of mine damage is the issue of sanitation and restoration. After the finishing mining the organization is obliged to carry out remediation and recultivation. When submitting an application for a mining permit, the organization must estimate the expected costs of these activities and prepare a remediation and recultivation plan. Reserves are created too. In the case of damages caused by abandoned underground mine works or quarries whose original operator or legal successor does not exist or is unknown (an old mining work), competences of the authorities are divided between the Ministry of the Environment (detecting and registering old mining works as well as securing or liquidation of them) and the mining administration (permitting of and supervision over securing or liquidation of old mining works). In the event, when undesirable manifestations of old mining works (eg. sinkholes) need to be solved operatively, the authorities ofcrisis management and of the integrated rescue system (mainly municipal authorities, fire brigade, etc.) come into play.
PL
Artykuł koncentruje się na problemie rekultywacji oraz likwidacji szkód górniczych i starych zakładów górniczych w Republice Czeskiej. Przybliża również regulacje prawne dotyczące wspomnianych tematów.
EN
In the final termination stage of the old mining, areas has been closed with the approval of the authorities. The mining authority does not have right to issue new permit regulations to areas where there are no valid concessions. The rights are restricted on monitoring previously issued regulations only. In summary it can be stated that the mining law of different times has not very exactly taken into consideration the responsibility questions of the mining companies after termination of mining activities. Open question still is that the continuity of responsibility after termination is not defined in mining law. The main rule has been that the responsibility of these areas belongs to the mining companies. This has come true in many cases, but not always. Especially when this property has been sold to private person, these responsibility questions have not always followed as a written bill of sale. In these kinds of cases the responsibility questions disappear.
PL
Po likwidacji zakładów górniczych za zgodą władz urząd górniczy nie ma prawa wydawać nowych zarządzeń. Może jedynie monitorować wykonanie wcześniejszych. Fińskie prawo górnicze różnych okresów niezbyt dokładnie uwzględniało kwestie odpowiedzialności spółek górniczych po zakończeniu działalności górniczej, a ciągłość odpowiedzialności nie została zdefiniowana. Główną zasadą było, że odpowiedzialność za te obszary spoczywa na spółkach wydobywczych. Nie zawsze się to jednak sprawdzało, zwłaszcza gdy nieruchomość została sprzedana osobie prywatnej, a zagadnienia odpowiedzialności nie zostały uregulowane w umowie sprzedaży.
EN
According to the Geological and Mining Law, a landowner cannot object to the dangers caused by the movement of a mining plant, which is being conducted in accordance with the law. However, he can demand compensation for the damage caused by this movement. It is up to the injured party to choose how to repair it. The entity responsible for the damage is the entrepreneur responsible for the operation of the mining plant resulting in the damage or its legal successor. In their absence, the State Treasury, represented by the competent mining supervisory authority, is responsible for the damage. Claims for compensation for damage caused by the mining plant's movement are first pursued through a settlement procedure - the injured party applies to the State Tre¬asury (the director of the relevant Regional Mining Authority) for a settlement covering his claim. It is the duty of the director of the relevant Regional Mining Authority to take steps to investigate the legitimacy of the claim filed. Exhaustion of this procedure is a prerequisite for pursuing the claim before a common court in accordance with the rigors of the Code of Civil Procedure.
PL
W artykule przybliżono problematykę szkód spowodowanych ruchem zakładu górniczego. Omówiono kwestie podmiotów zobowiązanych do naprawiania szkód, w tym Skarbu Państwa, trybu dochodzenia roszczeń i sposobu naprawy szkody oraz czynności podejmowanych przez organów nadzoru górniczego w przypadku skierowania roszczenia do Skarbu Państwa.
EN
This paper presents one of the environmental problems occurring during underground mine closures: according to the underground coal mine closure programme in Germany, the behaviour of the land surface caused by flooding of the entire planned mining area – the Ruhr District – had to be addressed. It was highlighted that water drainage would need to be continuous; otherwise, water levels would rise again in the mining areas, resulting in flooding of currently highly urbanised zones. Based on the variant analysis, it was concluded that the expected uniform ground movements caused by the planned rise in the mining water levels (comprising a part of two concepts – flooding up to the level of –500 m a.s.l. and −600 m a.s.l.), in the RAG Aktiengesellschaft mines, will not result in new mining damage to traditional buildings. The analysis included calculations of the maximum land surface uplift and the most unfavourable deformation factor values on the land surface, important from the point of view of buildings and structures: tilt T, compressive strain ε– and tensile strain ε+. The impact of flooding on potential, discontinuous land surface deformation was also analysed.
EN
The paper presents an example illustrating the problems of assessing the causes of damage that occurred to building structures located in mining and post-mining area. It is frequently necessary to determine whether probable damages came from other, non-mining causes or were caused by underground mining. This issue is particularly significant when it comes to monumental, historical objects because the cost of repairs is typically very high. The purpose of this work is to demonstrate, using the magnificent church as an example, that damage to building objects situated in mining areas does not necessarily result from mining activities. As a result, every such situation should be thoroughly evaluated to determine whether such a relationship exists. For the assessment of such a conclusion, multidirectional studies in the framework of this work were carried out: hydrogeological, mining and technical factors that cause the damage to the church building in question were analysed.
PL
Tereny górnicze podlegają ciągłym inwentaryzacjom, między innymi w celu oceny stopnia deformacji terenu czy też kontroli obiektów szczególnie chronionych. Posłużyć ku temu mogą nowoczesne techniki pomiarowe, w tym bezzałogowe statki powietrzne (drony). Sprzęt umożliwia wykonanie serii zdjęć, a następnie utworzenie z nich ortofotomapy, co stanowi podstawę do określenia aktualnej rzeźby terenu. Wygenerowany numeryczny model terenu zawiera ogromną ilość danych w postaci współrzędnych punktów terenowych (chmura punktów). Obróbka danych pozwala również na utworzenie profili, przekrojów, jak i wyznaczenie objętości. Duże możliwości na etapie postprocessingu sprawiają, że bezzałogowe statki powietrzne z sukcesem wykorzystać można w identyfikacji szkód górniczych, w tym na terenach rolnych. Dodatkowo za ich wykorzystaniem przemawia szybkość, elastyczność i wydajność pomiaru. W artykule określono szerokie zastosowanie bezzałogowych statków powietrznych w pracach inżynierskich. Nawiązano również do problematyki napraw szkód górniczych opierając się na obowiązujących przepisach prawnych. Na podstawie przytoczonych przykładów z nalotów ukazano zastosowanie bezzałogowych statków powietrznych w oględzinach szkody, tak istotne w procesie postępowania w przypadku szkód górniczych.
EN
Mining areas are subject to continuous inventories, inter alia, to assess the degree of terrain deformation or to control specially protected facilities. Modern measurement techniques, including unmanned aerial vehicles (drones), can serve this purpose. The equipment allows you to take a series of photos and then create an orthophotomap from them, which is the basis for determining the current relief. The generated numerical terrain model contains a large amount of data in the form of coordinates of terrain points (point cloud). Data processing also allows you to create profiles, sections, and determine the volume. Great opportunities at the postprocessing stage mean that unmanned aerial vehicles can be successfully used in the identification of mining damage, including in agricultural areas. In addition, their use is supported by the speed, flexibility, and efficiency of measurement. The article describes the wide use of unmanned aerial vehicles in engineering works. Reference was also made to the issue of repairing mining damage, based on the applicable legal regulations. On the basis of the examples from the raids, the use of unmanned aerial vehicles in the damage inspection was shown, which is so important in the process of dealing with mining damage.
EN
Seismic activity monitoring in the mining exploitation area is an important factor, that has an effect on safety and infrastructure management. The introduction sections presents the outline of mining interference into rock mass structure and selected parameters and methods of observation related to its effects. Further in the article an alternative to currently seismic measurement devices was proposed, and an preliminary research of its metrological quality was carried out based on experimental data. Assessment was based on short time Fourier transform (STFT) and Pearson cross-correlation coefficient.
EN
The paper presents a comparative analysis of Machine Learning (ML) research methods allowing to assess the risk of mining damage occurring in traditional masonry buildings located in the mining area of Legnica-Głogów Copper District (LGOM) as a result of intense mining tremors. The database of reports on damage that occurred after the tremors of 20 February 2002, 16 May 2004 and 21 May 2006 formed the basis for the analysis. Based on these data, classification models were created using the Probabilistic Neural Network (PNN) and the Support Vector Machine (SVM) method. The results of previous research studies allowed to include structural and geometric features of buildings,as well as protective measures against mining tremors in the model. The probabilistic notation of the model makes it possible to effectively assess the probability of damage in the analysis of large groups of building structures located in the area of paraseismic impacts. The results of the conducted analyses confirm the thesis that the proposed methodology may allow to estimate, with the appropriate probability, the financial outlays that the mining plant should secure for the repair of the expected damage to the traditional development of the LGOM mining area.
PL
Przedmiotem referatu jest przedstawienie skutków górniczej deformacji powierzchni mogących powodować zagrożenie bezpieczeństwa konstrukcji budynków wielkopłytowych oraz warunków ich użytkowania. Opisano najczęściej ujawniające się w takich budynkach uszkodzenia i zalecenia odnośnie ich napraw.
EN
The subject of the paper is to present the effects of mining surface deformation that may pose a threat to the safety of the structure of large-panel buildings and the conditions of their use. The most common damage to such buildings and recommendations for their repair are described.
PL
Oprócz analiz szczegółowych w praktyce inżynierskiej zachodzi często potrzeba ustalenia w krótkim czasie odporności zabudowy całych zespołów wiejskich lub miejskich (dzielnic i osiedli) na wpływy eksploatacji - bieżącej, planowanej lub deformacji pogórniczych. W tym celu najczęściej wykorzystuje się metodę najszybszą - tak zwaną metodę punktową. Ograniczenia tej metody wykluczają jednak budowle nietypowe np. halowe, w złym stanie technicznym itp. Dla przypadków takich, wymagających szczegółowej i indywidualnej analizy, opracowano przedstawioną analityczną metodę parametryczną [1]. W artykule opisano przypadek analizy rzeczywistego, nietypowego obiektu inżynierskiego, którego bezpieczne użytkowanie zagrożone zostało przez nadmierną deformację podłoża gruntowego, pokazując drogę postępowania inżynierskiego przy ocenie bezpieczeństwa tego obiektu.
EN
In addition to detailed analyzes in engineering practice, there is often a need to determine, in a short time, the resistance of the development of entire rural or urban complexes (districts and housing estates) to the impact of exploitation - current, planned or post-mining deformations. For this purpose, the fastest method is most often used - the so-called point method. However, the limitations of this method exclude atypical structures, e.g. hall buildings, buildings in poor technical condition, etc. For such cases, requiring a detailed and individual analysis, the analytical parametric method presented below was developed [1]. The article describes a case of an analysis of a real, atypical engineering structure, the safe use of which was endangered by excessive deformation of the subsoil; showing the way of engineering proceedings when assessing the safety of this facility.
EN
The basis for recognising claims for mining damage to a structure should be a mining and construction analysis, carried out following a detailed visual inspection of the damage and the results of surface deformation measurements. It allows to establish a cause and effect relation between the activity of the mining company and the damage. Unfortunately, there are cases when such an analysis is omitted and the following scheme is used: "since there is damage and the object is located in a mining area, it is mining damage". The problem is illustrated by two court cases where the author acted as an expert witness. Both cases are examples of the so-called pseudo-mining damage and confirm the thesis that the mere image of damage without professional analysis of construction and mining factors may lead to wrong conclusions regarding the causes of the damage.
PL
Podstawą do uznania roszczeń z tytułu szkód górniczych powstałych w obiekcie budowlanym powinna być analiza górnicza i budowlana, przeprowadzona w oparciu o szczegółowe oględziny uszkodzeń oraz wyniki pomiarów deformacji powierzchni. Pozwala ona na ustalenie więzi przyczynowo-skutkowej pomiędzy działalnością zakładu górniczego a zaistniałymi uszkodzeniami. Niestety zdarzają się przypadki pomijania takiej analizy i działania według schematu: „skoro są uszkodzenia, a obiekt jest zlokalizowany na terenie górniczym, to jest to szkoda górnicza”. Ilustrację problemu stanowią dwa przypadki spraw sądowych, gdzie autor występował jako biegły. Oba przypadki stanowią przykłady tzw. szkód pseudogórniczych i potwierdzają tezę, że sam obraz uszkodzeń bez fachowej analizy czynników budowlanych i górniczych może prowadzić do błędnych wniosków odnośnie przyczyn zaistniałych uszkodzeń.
EN
The liquidation of underground mines by the flooding leads to movements of the rock mass and land surface as a result of pressure changes in the flooded zones. The changes resulting from the rising water table caused by the changes in the stress and strain state, as well as the physical and mechanical properties of rock layers, can lead to damage to building structures and environmental changes, such as chemical pollution of the surface water. For this reason, the ability to predict the movements of rock masses generated as a result of mine closure by flooding serves a key function in relation to the protection of the land surface and buildings present thereon. This paper presents an analysis of a steel industrial portal-frame structure under loading generated by the liquidation of a mine by flooding. The authors obtained land surface uplift results for the liquidated mine and used them in a numerical simulation for the example building. Calculations were performed for different cases, and the results were compared to determine whether limit states may be exceeded. A comparison was made between the cases for the design state and for additional loading caused by the uplift of the subsurface layer of the rock mass.
PL
Likwidacja podziemnych kopalń przez zatapianie prowadzi do ruchów górotworu i powierzchni terenu w wyniku zmian ciśnienia w strefach zatapianych. Zmiany wynikające z podniesienia się zwierciadła wody podziemnej, spowodowane zmianami stanu naprężenia i odkształcenia oraz właściwości fizycznych i mechanicznych warstw skał mogą prowadzić do uszkodzeń powierzchniowych obiektów budowlanych oraz zmian środowiskowych, takich jak chemiczne zanieczyszczenie wód przypowierzchniowych. Z tego względu możliwość przewidywania ruchów górotworu powstających w wyniku likwidacji kopalń przez zatapianie pełni kluczową funkcję w odniesieniu do ochrony powierzchni terenu i znajdujących się na nim budynków. W artykule przedstawiono analizę przemysłowej stalowej hali magazynowej pod obciążeniem wynikającym z likwidacji kopalni w wyniku jej zatapiania. Autorzy uzyskali wyniki wypiętrzenia terenu zlikwidowanej kopalni i wykorzystali je w symulacji numerycznej przykładowego budynku. Obliczenia przeprowadzono dla różnych przypadków, a wyniki porównano w celu określenia, czy możliwe jest przekroczenie stanów granicznych. Dokonano porównania pomiędzy stanem projektowym i dla dodatkowego obciążenia spowodowanego wypiętrzeniem przypowierzchniowej warstwy gruntu.
PL
Przedmiotem artykułu jest podsumowanie eksploatacji górniczej pod śródmieściem Bytomia, jej zakresu, deformacji, a także ich skutków spowodowanych eksploatacją wielokrotną – wielopokładową i prowadzoną w długim okresie czasu. Była to największa eksploatacja w Polsce, a może na świecie, pod terenem zabudowanym – pod dużym miastem. Największa w sensie wydobytego węgla kamiennego i czasu jej prowadzenia. Wykazano, że narastanie deformacji, spowodowanej eksploatacją wielokrotną i w długim okresie czasu, było możliwe pod zwartą zabudową miejską, choć musiały jej towarzyszyć uszkodzenia, a także wyburzanie budynków. W szczególności porównano określone obliczeniowo na podstawie odkształceń poziomych kategorie terenu górniczego, uwzględniając ich narastanie w czasie (deformacje czasowo-ekstremalne) oraz ich redukcję, uwzględniając relaksację odkształceń poziomych.
EN
The subject of the article is a summary of the range and deformation of mining exploitation under the Bytom downtown, and the effects of multiple, multi - seam exploitation which was carried out over a long period of time. It was the largest exploitation under the big city in Poland, under built - up area and probably in the world. It was the largest because there was the largest extraction and it lasted the longest. It was proved that the deformation increase caused by the multiple and long - lasting exploitation was possible under compact urban buildings, although damage and demolition of buildings occurred. In particular computationally defined categories of mining areas were compared based on horizontal strains, taking into account their increase in time and their reduction, calculating the so - called relaxed horizontal strains.
PL
Prawidłowo zaprojektowany budynek na tereny objęte wpływami górniczymi wymaga, oprócz obciążeń ogólnych, zwanych powszechnie normowymi, uwzględnienia także oddziaływań górniczych, zarówno w obliczeniach, jak i przy konstruowaniu obiektu. Nakłady poniesione na wzmocnienie konstrukcji z tytułu przejmowania oddziaływań górniczych mogą być następnie rekompensowane przez przedsiębiorcę górniczego. W przypadkach łagodnych wpływów górniczych można je w obliczeniach pominąć, nie rezygnując jednak z odpowiedniego wzmocnienia konstrukcji. W artykule rozważane są sztywne budynki jednorodzinne o niedużych wymiarach w planie, wykonane z betonu lub drobnowymiarowych elementów murowych, względnie podobne budynki o innym przeznaczeniu. Zachodzi pytanie, jak należy podejść do konstruowania budynków jednorodzinnych, w projektowaniu których nie są wykonywane obliczenia wpływu oddziaływań górniczych, by jednocześnie zaprojektowane wzmocnienie zostało uznane za prawidłowe i możliwe do zrekompensowania przez przedsiębiorcę. W praktyce budynki jednorodzinne posadawiane na terenach objętych wpływami górniczymi w zdecydowanej większości projektuje się bez wykonywania obliczeń uwzględniających te wpływy, szczególnie w przypadkach, gdy są one niewielkie. W artykule przeanalizowano istniejące wymagania i wytyczne dotyczące projektowania obiektów na terenach górniczych, odnosząc je do budynków jednorodzinnych, by następnie poddać je ocenie pod kątem przysługującej rekompensaty za poniesione nakłady z tytułu zabezpieczenia obiektu na oddziaływania górnicze.
EN
A properly designed building for areas affected by mining requires, in addition to general loads, to take into account mining impacts, both in the calculations and in the construction of the object. Expenditures incurred for strengthening the structure due to taking over mining impacts may then be compensated by the mining entrepreneur. In cases of mild mining influences, they can be omitted in the calculations, without giving up the appropriate reinforcement of the structure. The paper considers rigid single-family buildings with small dimensions in the plan, made of concrete or small-sized masonry elements, or similar buildings for other purposes. The question arises as to how to approach the construction of single-family buildings, in the design of which no calculations of the impact of mining impacts are carried out, so that the designed reinforcement is considered correct and can be compensated by the entrepreneur. In practice, single-family buildings erected in areas affected by mining influence, in the vast majority, are designed without calculations taking into account these inflows, especially in cases where the inflows are small. The paper examines the existing requirements and guidelines for the design of objects in mining areas, referring them to single-family buildings, and then evaluates them in terms of the compensation for the expenses incurred for securing the facility for mining impacts.
PL
W artykule dokonano oceny uszkodzeń zewnętrznej elewacji budynku, spowodowanych podziemną eksploatacją górniczą z wykorzystaniem technologii UAV (ang. Unmanned Aerial Vehicle). Jako obiekt badań wybrano Kościół pod wezwaniem Św. Krzyża, zlokalizowany przy ulicy Frenzla w Bytomiu. W rejonie Kościoła prowadzona była wieloletnia eksploatacja węgla kamiennego. W celu oceny aktualnego stanu zewnętrznej elewacji przeprowadzono nalot bezzałogowym statkiem powietrznym. Wykonano serię zdjęć frontu budynku. Do opracowania metrycznej fotomapy elewacji wykorzystano oprogramowanie CAD (ang. Computer Aided Design) z nakładką Geolisp. Procedura umożliwiła inwentaryzację i kategoryzację uszkodzeń.
EN
The article performer evaluation of damage to the building’s external façade caused by mining exploitation using UAV (Unmanned Aerial Vehicle) technology. The church which is located at Frenzla Street in Bytom was chosen for the study. In the area of the church was carried out coal mining for many years. To assess the current condition of the external facade was using a unmanned aerial vehicle. A series of photos of the front of the building were taken. CAD (Computer Aided Design) software with Geolisp overlay was used to develop a metric photomap. The procedure allowed inventories and categorization of damage.
PL
W Polsce przy projektowaniu, budowie, przebudowie sieci gazowych stosuje się regulacje zawarte w Rozporządzeniu Ministra Gospodarki z dnia 26 kwietnia 2013 r. w sprawie warunków technicznych, jakim powinny odpowiadać sieci gazowe i ich usytuowanie (Dz.U. z 2013 r., poz. 640). Jako materiały do budowy gazociągów rozporządzenie dopuszcza do stosowania stal i polietylen. Polietylen może być wykorzystywany do budowy gazociągów o maksymalnym ciśnieniu roboczym MOP 1,0 MPa. Budowa gazociągów powyżej tego ciśnienia realizowana jest więc wyłącznie z rur stalowych. W zakresie ciśnień do 1,6 MPa włącznie można by zastosować rury z poliamidu PA 12. Wymagania dla systemów rurociągów budowanych z poliamidu PA określone są w normach z serii ISO 16486 Plastics piping systems for the supply of gaseous fuels – Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing. Normy te nie podają wytycznych postępowania w zakresie projektowania, budowy i eksploatacji gazociągów zlokalizowanych na terenach szkód górniczych. Niniejszy artykuł poświęcono ocenie możliwości stosowania rur z poliamidu PA 12 do budowy gazociągów na terenach szkód górniczych. W artykule przedstawiono opracowaną metodykę badań, uwzględniającą odkształcenia terenu występujące na terenach szkód górniczych powodujące naprężenia wzdłużne i zginające. Metodyka ta pozwala ocenić wpływ obciążeń i oddziaływań na wytrzymałość rurociągów z poliamidu PA 12. Uzyskane w trakcie badań wyniki ciśnienia przy granicy plastyczności p (Re) porównano z wynikami otrzymanymi dla próbek niepoddanych zginaniu. Wyniki badań potwierdziły, że rury PA 12 oraz ich połączenia zgrzewane elektrooporowo i połączenia mechaniczne (PA/STAL) nie wykazały obniżenia wytrzymałości rur poddanych odkształceniom wzdłużnym i zginającym. Potwierdza to, że istnieje możliwość ich wykorzystania do budowy gazociągów na terenach szkód górniczych do IV kategorii terenów górniczych. Natomiast w przypadku ewentualnego stosowania połączeń zgrzewanych doczołowo konieczne jest wcześniejsze przeprowadzenie dalszych badań i analiz mających na celu potwierdzenie ich wytrzymałości na działanie sił osiowych. Wykorzystanie w Polsce systemów rurowych z poliamidu do przesyłania gazu wymaga wprowadzenia zmian w prawie. Przeprowadzone w ramach pracy badania i uzyskane wyniki mogą stanowić kolejny krok do wprowadzenia nowych regulacji prawnych.
EN
In Poland, when designing, constructing and reconstructing gas networks, the regulations contained in the Regulation of the Minister of Economy of 26 April 2013 on technical conditions to be met by gas networks and their location apply (Journal of Laws 2013 item 640). The regulation regarding the materials used for the construction of gas pipelines allows for steel and polyethylene. Polyethylene can be used to build gas pipelines with a maximum working pressure of 1.0 MPa MOP. Construction of gas pipelines above this pressure is therefore carried out exclusively using steel pipes. In the pressure range up to and including 1.6 MPa, polyamide PA 12 pipes can be used. Requirements for piping systems built of PA polyamide are specified in the standards of the ISO 16486 Plastics piping systems for the supply of gaseous fuels – Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing. These standards do not provide guidelines for the design, construction and operation of gas pipelines located in mining damage areas. This article is devoted to the assessment of the possibility of using polyamide PA12 pipes for the construction of gas pipelines in mining damage areas. The article pre- sents a developed research methodology that takes into account ground deformations occurring in mining damage areas causing longitudinal and bending stresses. The developed test methodology allows to assess the influence of loads and impacts on the strength of pipelines made of polyamide PA12. The pressure results obtained during the test at the yield point p (Re) were compared with the results obtained for the samples not subjected to bending. The results obtained from the conducted tests confirmed that PA12 pipes and their electrofusion welded joints and mechanical joints (PA/STAL) did not show a decrease in the strength of pipes subjected to longitudinal and bending deformations. This confirms that their use for the construction of gas pipelines in mining damage areas, in mining areas up to category IV, is possible. If it is possible to use butt-welded joints, it is necessary to conduct further tests and analyses to confirm their resistance to axial forces. The use of polyamide piping systems for gas transmission in Poland requires changes in the law. The research and results obtained as part of the work may constitute another step towards the introduction of new legal regulations.
19
Content available remote Threats of flooding of selected mining areas – repair measures
EN
Terrain surface subsidence observed in mining areas results in the flattening of riverbeds and their embankments. This leads to increasingly deep erosion and siltation of riverbeds and surface currents, which causes the emergence of permanent overflow lands. This paper presents hydro – engineering solutions applied in the areas of the mining activity of JSW S.A., which serve the purpose of repairing and eliminating mining damage in the existing infrastructure. The presented repair measures make it possible to eliminate the threat of flooding in mining areas.
PL
Występujące w obszarach górniczych osiadania terenu powodują obniżenia koryt rzek i ich obwałowań. W następstwie dochodzi do zwiększonej erozji dennej lub do zamuleń koryt rzecznych i cieków powierzchniowych, co powoduje powstawanie trwałych zalewisk. W artykule przedstawiono rozwiązania hydrotechniczne stosowane w rejonach działalności górniczej JSW S.A., które służą do naprawy oraz likwidacji szkód górniczych w istniejącej infrastrukturze. Przedmiotowe działania naprawcze pozwalają na wyeliminowanie zagrożenia podtopieniem terenu górniczego.
EN
This paper investigates the influence of extraction on the surface in the area of the Pszczynka river. The mining-enhanced terrain subsidence hitherto observed has also resulted in the subsidence of the riverbed and its embankment. Some geotechnical solutions are proposed, including the reconstruction and repair of damage to the existing infrastructure. Such measures should facilitate a proper flow of water in the riverbed which is similar to a natural flow.
PL
W artykule przedstawiono wpływ dotychczasowej eksploatacji górniczej na powierzchnię terenu w rejonie rzeki Pszczynki. Występujące osiadania terenu spowodowały obniżenia koryta rzeki i jej obwałowań. Zaproponowano rozwiązania geotechniczne polegające na wykonaniu przebudowy i naprawy szkód w istniejącej infrastrukturze. Podjęte działania pozwalają na prawidłowy przepływ wody w korycie rzeki zbliżony do naturalnego.
first rewind previous Strona / 9 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.