Many open-pit mines are gradually converted to underground mining, the problem of roadway surrounding rock damage caused by expansive soft rock is becoming increasingly problematic. To study the seasonal evolution of expansive rock mass containing clay minerals, an underground mine transferred from an open-pit was selected as the experimental mine. The experimental results of SEM electron microscopy and X-ray diffraction confirmed that the surrounding rock of the main haulage roadway contains a large number of expansive clay minerals. The expansive grade of the main transport roadway’s surrounding rock could then be identified as the medium expansive rock mass, which has a large amount of exchangeable cation and strong water absorption capacity, based on the combined test results of dry saturated water absorption and free expansion deformation. The water swelling can cause the roadway to considerably deform, and then the surrounding rock will have strong rheological characteristics. From the research results in the text, the seasonal evolution law of the main haulage roadway in the experimental mine was obtained, and the deformation law of the expansive rock mass under different dry and wet conditions was revealed. The research results provide a reference for studying the stability evolution law of expansive soft rocks in underground mines.
Given the complexity and uniqueness of underground hard rock mines, the application of the design fire scenario approach is recommended when evaluating fire safety in mines. Providing a full set of design fire scenarios – ensuring that several important life safety aspects are covered – for a mine can be challenging. The question is whether a catalogue of potential clusters of design fire scenarios could be developed, covering important aspects found underground? Given the general lack of research into design fires in the mining industry, this paper provides a unique analysis of design fire scenarios in underground hard rock mines. Taking advantage of several different and diverse data sources, a comprehensive analysis with holistic character is provided where several proposed clusters of design fire scenarios and analyses of what criteria to apply when evaluating the scenarios are presented. The analysis of suitable criteria highlights the toxicity of the emitted smoke and decrease in visibility as potential criteria underground. The proposed scenarios focus on influencing parameters such as the fire behaviour, position of fire, fire load, and smoke spread. The proposed clusters of design fire scenarios will provide a key tool when evaluating fire protection measures in an underground mine.
Underground mining operations are a very problematic task, especially in poor geotechnical conditions. The right choice of excavation and support techniques leads to adequate and secure mining operations. This should ensure the overall stability of the underground mine with the best productivity and stability performance. In this paper, an empirical model for obtaining support systems for underground galleries was applied. Then, a numerical model for the evaluation of the performance of support measures for rock masses in the Boukhadra iron mine was introduced. Extensive field and laboratory tests were performed to obtain geological, geotechnical, and mechanical data on the entire geologic formations of the (1105 m) level. The performance of the design is supported by the selection of a common support plan between RMR, Q, and UBC systems for each geotechnical unit. Therefore, the rock masses classification based on the geo-mechanical model has determined the suitable support systems. The finite element model (FEM) was used for the analysis of rock mass behaviour, displacements, stress, and plastic point distribution. The results permit the optimization of the plastic zone thickness around the gallery. The outcomes of this study could improve the stability of the mine by choosing the right direction of excavation in consideration to the direction of the discontinuity planes. In order to choose between the current and the recommended mining operations, an equivalent calculation sequence was verified. Our study demonstrated that the consideration of discontinuity sets in the orientation of excavation highly improves the mining conditions with or without support.
4
Dostęp do pełnego tekstu na zewnętrznej witrynie WWW
Artykuł zawiera prezentację wyników badań nad obecnym stanem i kierunkami zagospodarowania kopalni w regionie Górnego Śląska. Zrealizowane badania objęły kilkadziesiąt miejsc związanych z eksploatacją węgla kamiennego. Autor skupił się na zespołach szybowych kopalni podziemnych. Przedstawiono ich rozmieszczenie oraz poddano analizie pod kątem istotnych cech. Scharakteryzowano procesy związane z przemysłową działalnością kopalni, a także ich likwidacją oraz ewentualną adaptacją do nowych funkcji.
EN
This paper is a presentation of the findings on the current state and course of development of mines in the area of the Upper Silesia. The study covered several dozen sites associated with procurement of coal. The author focused on the shaft complexes of underground mines. Their distribution has been presented and subjected to analysis in terms of essential characteristics. Processes associated with the industrial activity of mine, its liquidation and possible adaptive reuse were characterised.
Prawo górnicze z 1930 r. nadało wyższym urzędom górniczym kompetencje do wydawania regulacji szczegółowych na tej podstawie, w 1947 r., prezes WUG w Katowicach wydał „Przepisy jazdy szybami" ujmujące całościowo, po raz pierwszy w polskim górnictwie, wymagania dla transportu osób górniczymi wyciągami szybowymi. Pomimo upływu czasu, większość z tych wymagań jest aktualna i znajduje odzwierciedlenie w dzisiejszych przepisach. Obowiązujące w tym zakresie regulacje prawne obejmują cztery obszary: wymagań technicznych projektowania ; wykonania elementów górniczych wyciągów szybowych, zasad bezpiecznego korzystania z wyciągów, kontroli i nadzoru nad ich eksploatacją oraz wymagań, jakie obowiązane są spełniać osoby odpowiedzialne za ruch górniczych wyciągów szybowych. Artykuł omawia je na tle zmian, jakie miały miejsce w prawie górniczym w okresie od odzyskania przez Polskę niepodległości do czasów współczesnych.
EN
The first Polish mining law was enacted ninety years ago and has become the foundation of uniform regulations for mines located in previous partitions territory of Poland. The act of mining enacted in 1930 gave the central mining authorities the jurisdiction to establish detailed regulation based on this legal act. As a result, in 1947 the President of the State Mining Authority in Katowice enacted The transport of persons mine shaft regulation" (in Polish) which for the first time contained requirements related to transporting persons. Despite passing of the time, most of them are still valid. Current regulations consist of four parts: technical requirements for designing and producing elements of the mining shaft hoists, safety regulations for using hoist machines, control and supervision the working staff. The article writes about them on the background of the regulations changes within the last ninety years.
W artykule przedstawiono wyniki badań jakości połączeń taśm przenośnika, co ma znaczący wpływ na ich wytrzymałość. Diagnostyka taśm przenośnikowych z linkami stalowymi przy użyciu metod nieniszczących (NDT) pozwala wykrywać i monitorować uszkodzenia na całej długości taśmy. Taka diagnostyka umożliwia również ocenę jakości połączenia. Testy, oparte na tej metodzie, zostały przeprowadzone z wykorzystaniem systemu diagnostycznego Diagbelt opracowanego na Wydziale Geoinżynierii, Górnictwa i Geologii Politechniki Wrocławskiej. Zaproponowano kilka metod poprawy jakości połączeń w oparciu o uzyskane wyniki. Przedmiotem badań była trudnopalna taśma przenośnikowa ST 3150 o szerokości B-1200. Testy przeprowadzono na przenośniku taśmowym eksploatowanym w polskiej kopalni podziemnej.
EN
The article presents the results of tests on the quality of conveyor belt joints, which has a significant impact on their strength. Diagnostics of steel conveyor belts using non-destructive methods (NDT) allows detecting and monitoring damage along the entire length of the belt. Such diagnostics also makes it possible to assess the quality of the splices. Tests based on the proposed method were carried out using the Diagbelt diagnostic system developed at the Faculty of Geoengineering, Mining and Geology at the Wroclaw University of Technology.
Subsidence and vertical movements in mines are a challenge in mining operations. To qualify as a controlled mine site, ground movements must be measured regularly during mining operations. Boleo Copper District mine was monitored and the movement during mining operations was measured from Oct. 31, 2018 to March 15, 2019. The evaluation of vertical and horizontal movement was determined in four locations in the mine areas M303, M303S, M303 C, and M305. The exploitation area, which measured approximately 80 £ 90 m2 with a height of 2.4 m, impacted the surface in the form of cracks. These cracks were observed on the topographic surveys and varied during the mining operations from the beginning to the end. The final results indicated that the points with the greatest displacement were those in the central zone of the mine excavation (points #3, 5, and 6) and the displacement trend of the ground was toward this zone. In theory, the subsidence is typically lesser than the thickness of the extracted ore. In this case, the maximum subsidence was 1.15 m and the ore seam thickness was 2.4 m. The maximum possible subsidence is typically 55-65% of the extracted seam thickness; however, because chain pillars are generally left in place, and provide some support, this maximum possible subsidence is rarely reached. In this case, the maximum subsidence was 52% of the seam thickness.
Optimization in mine planning could improve the economic benefit for mining companies. The main optimization contents in an underground mine includes stope layout, access layout and production scheduling. It is common to optimize each part sequentially, where optimal results from one phase are treated as the input for the next phase. The production schedule is based on the mining design. Access layout plays an important role in determining the connection relationships between stopes. This paper proposes a shortest-path search algorithm to design a network that automatically connects each stope. Access layout optimization is treated as a network flow problem. Stopes are viewed as nodes, and the roads between the stopes are regarded as edges. Moreover, the decline location influences the ore transport paths and haul distances. Tree diagrams of the ore transportation path are analyzed when each stope location is treated as an alternative decline location. The optimal decline location is chosen by an enumeration method. Then, Integer Programming (IP) is used to optimize the production scheduling process and maximize the Net Present Value (NPV). The extension sequence of access excavation and stope extraction is taken into account in the optimization model to balance access development and stope mining. These optimization models are validated in an application involving a hypothetical gold deposit, and the results demonstrate that the new approach can provide a more realistic solution compared with those of traditional approaches.
PL
Optymalizacja w planowaniu kopalni może poprawić korzyści gospodarcze dla przedsiębiorstw górniczych. Główna część optymalizacji w kopalni podziemnej obejmuje układ wyrobisk eksploatacyjnych, schemat udostepnienia i harmonogram wydobycia. Zazwyczaj każdy etap optymalizowany jest sekwencyjnie, gdzie optymalne wyniki z jednej fazy są traktowane jako dane wejściowe do następnej fazy. Harmonogram produkcji opiera się na projekcie górniczym. Struktura udostępnienia odgrywa ważną rolę w określaniu połączeń pomiędzy przodkami eksploatacyjnymi. Ten artykuł proponuje algorytm wyszukiwania najkrótszej ścieżki, aby zaprojektować sieć, która automatycznie łączy każdy przodek. Optymalizacja struktury udostępnienia jest traktowana jako problem przepływu w sieci. Przodki są traktowane jako węzły, a drogi pomiędzy nimi jako krawędzie. Ponadto lokalizacja upadowej udostępniającej wpływa na drogi transportu rudy i odległości odstawy. Analiza ścieżek drzew zdarzeń odbywa się przy założeniu alternatywnych lokalizacji upadowych. Optymalna lokalizacja upadowej jest wybierana metodą wyliczania. Następnie, za pomocą programowania zintegrowanego (Integer Programming – IP) optymalizuje się proces planowania produkcji i maksymalizacji wartości bieżącej netto (NPV).Rozwinięty układ wyrobisk udostępniających i eksploatacyjnych jest uwzględniany w modelu optymalizacji do zbilansowania udostępnienia i eksploatacji złoża. Te modele optymalizacji są walidowane w aplikacji uwzględniającej hipotetyczne złoże rud złota, której wyniki pokazują, że nowe podejście może dostarczyć bardziej realistyczne rozwiązanie w porównaniu z tradycyjnymi metodami.
Magnetyczne systemy diagnostyczne stosowane są do oceny stanu technicznego taśm przenośnikowych od początku lat 70. ubiegłego wieku. Początkowo generowały one sygnał analogowy agregowany dla torów pomiarowych (pasów taśmy) o szerokości kilkudziesięciu centymetrów, skanowanych sekwencyjnie jedną głowicą pomiarową w kilku cyklach lub całą szerokością taśmy za jednym razem, dzięki instalacji wielu głowic pomiarowych w całym przekroju. Nie pozwalało to na identyfikację pojedynczych uszkodzeń o wielkości kilku centymetrów. Nowoczesne urządzenia diagnostyczne, dzięki miniaturyzacji, umożliwiają instalację nawet 200 cewek w listwie pomiarowej mocowanej w poprzek pełnej szerokości taśmy, w celu identyfikacji uszkodzeń pojedynczych linek. Zamiast sygnałów analogowych generują one cyfrowy sygnał zerojedynkowy, odpowiadający zmianie znaku pola magnetycznego, co pozwala pokazać uszkodzenie na obrazach 2D. Ułatwia to identyfikację lokalizacji i rozmiaru uszkodzeń w rdzeniu taśmy. Wyniki kilku pomiarów stanu pętli taśmy w jednej z kopalń podziemnych w Polsce posłużyły do opracowania modelu rozwoju uszkodzeń rdzenia taśm przenośnikowych z linkami stalowymi, który powstał w ramach doktoratu obronionego na Wydziale Geoinżynierii, Górnictwa i Geologii PWr przez dr inż. Agatę Kirjanów-Błażej, pod kierunkiem dr. hab. inż. Leszka Jurdziaka. W kolejnych częściach artykułu zostaną przedstawione wyniki analiz statystycznych zebranych danych. Pierwsza część omawia rozkład uszkodzeń wzdłuż osi taśmy. W drugiej przedstawiony zostanie rozkład uszkodzeń w poprzek taśmy, a w trzeciej rozwój uszkodzeń w czasie. Wyniki badań posłużą do opracowania prognozy przyszłych stanów taśmy, co ma praktyczny wymiar dla ich użytkowników. Planuje się zaimplementowanie wykrytych zależności stochastycznych w algorytmach wspomagających podejmowanie decyzji o wymianach taśm w systemie DiagBelt, który opracowany został w ramach grantu NCBiR przez dr. hab. inż. Ryszarda Błażeja.
EN
Magnetic diagnostic systems are used to assess the condition of steel cord conveyor belts since the early 1970s. Initially, they generated an analogue signal aggregated for measuring tracks (belt strips) with a width of several dozen centimetres scanned sequentially by one measuring head in several cycles or the entire belt width at once thanks to the installation of multiple measuring heads throughout the cross-section. Such a solution did not allow identification of individual lesions of a size of a few centimetres. Modern diagnostic devices, thanks to miniaturization, allow the installation of up to 200 coils in a measuring rod mounted across the full width of the belt in order to identify damage to individual cables. Instead of analogue signals, they generate a digital zero-one signal corresponding to the change of the magnetic field sign, which allows showing the damage on 2D images. This solution makes it easier to identify the location and size of damage in the core of the belt. The results of several scans of the belt loop condition in one of the underground mines in Poland were registered. Then they were used to develop a „Model of damage development of the core of steel conveyor belts”, which was work out as a part of the PhD thesis written by Agata Kirjanów-Błażej at the Faculty of Geoengineering, Mining and Geology of the Wroclaw University of Science and Technology supervised by Leszek Jurdziak, university professor. The next parts of the paper will present the results of statistical analyses of collected data. The first discusses the distribution of core failures along the axis of the belt. In the second one, the distribution of defects across the belt will be presented, and in the third, the core failures development over time. The obtained results will be used to develop forecasts of future belt conditions, which has a practical dimension for their users. It is planned to implement the detected stochastic dependencies in algorithms supporting decision making on belt replacements in the DiagBelt system, which was worked out as part of the NCBiR grant by Ryszard Błażej, DSc, PhD.
One of the most significant tools when designing fire safety in an underground mine is the design fire methodology. This paper presents a number of design fire scenarios which were developed from risk assessments and risk analysis where a deterministic approach was implemented and where the results from earlier full-scale fire experiments in underground mines and analysis were included in the process. The developed scenarios showed that for scenarios, in which ventilation flow was in the same direction as the fuel continuity, continued fire spread to all major components were provided and longer and intermittent periods which resulted in high heat release rates resulted, would present a considerable risk to underground personnel. It was also found that the inclination of the decline has little influence on the resulting heat release rate - despite the flame tilt - and that the design of the mining vehicles was found to effectively delay or even prevent the ignition of adjacent fuel items in a number of cases. The design fire scenarios developed will provide a key tool when evaluating fire protection measures in an underground mine.
The article presents the choice of a Polish powered roof support from FAMUR Group for the conditions of one of the hard coal mines in Vietnam. In the analytical calculations, the strength and structural parameters of the rock mass from the Vang Danh mine region were adopted. The longwall face is 93 m long and the thickness of the coal layer is equal 3 m. For the needs of the choice of support, the load of the longwall face determined and the capacity of the powered roof support were determined. On the basis of the permissible roof deflection method, the condition of excavation maintenance was characterized. In the calculations, it was assumed that the condition of using a powered roof support type FAZOS-15/31-POz, except in addition to complying of the working range and permissible value of longwall face inclination, is to ensure proper roof maintenance conditions, which are determined by the index of load capacity of the roof „g”.
The main optimized objects in underground mines include: stope layout, access layout and production scheduling. It is common to optimize each component sequentially, where optimal results from one phase are regarded as the input data for the next phase. Numerous methods have been developed and implemented to achieve the optimal solution for each component. In fact, the interaction between different phases is ignored in the tradition optimization models which only get the suboptimal solution compared to the integrated optimization model. This paper proposes a simultaneous integrated optimization model to optimize the three components at the same time. The model not only optimizes the mining layout to maximize the Net Present Value (NPV), but also considers the extension sequence of stope extraction and access excavation. The production capacity and ore quality requirement are also taken into account to keep the mining process stable in all mine life. The model is validated to a gold deposit in China. A two-dimensional block model is built to do the resource estimation due to the clear boundary of the hanging wall and footwall. The thickness and accumulation of each block is estimated by Ordinary Kriging (OK). In addition, the conditional simulation method is utilized to generate a series of orebodies with equal possibility. The optimal solution of optimization model is carried out on each simulated orebody to evaluate the influence of geological uncertainty on the optimal mining design and production scheduling. The risk of grade uncertainty is quantified by the possibility of obtaining the expected NPV. The results indicate that the optimization model has the ability to produce an optimal solution that has a good performance under the uncertainty of grade variability.
PL
Główne optymalizowane obiekty w kopalniach podziemnych to parametry struktury przodka wybierkowego, optymalnego udostępnienia oraz planowanie robót górniczych. Powszechne jest optymalizowanie każdego komponentu po kolei, przy czym optymalne wyniki jednej fazy są uważane za dane wejściowe dla następnej. Opracowano i wdrożono wiele metod w celu uzyskania optymalnego rozwiązania dla każdego komponentu. W rzeczywistości interakcja między różnymi fazami jest ignorowana w tradycyjnych modelach optymalizacji, które prowadzą do nieoptymalnych rozwiązań w porównaniu ze zintegrowanym modelem optymalizacji. Niniejszy artykuł przedstawia zintegrowany model optymalizacji optymalizujący trzy komponenty w tym samym czasie. Model nie tylko optymalizuje układ wydobywczy, aby zmaksymalizować wartość bieżącą netto (NPV), ale także uwzględnia parametry przodka wybierkowego oraz wkopu udostępniającego złoże. Aby utrzymać proces wydobycia na stałym poziomie przez cały czas trwania eksploatacji, pod uwagę brane są również zdolności produkcyjne oraz wymagania dotyczące jakości rudy. Omawiany model jest opracowany na potrzeby złoża złota w Chinach. Powstały dwuwymiarowy model blokowy do oszacowania zasobów ze względu na wyraźną granicę między skrzydłem wiszącym a spągowym. Grubość i akumulacja każdego bloku jest szacowana za pomocą krigingu zwyczajnego (OK). Dodatkowo wykorzystywana jest warunkowa symulacja w celu generowania szeregu złóż rudy. Optymalny model optymalizacji jest przeprowadzany na każdym symulowanym złożu w celu oceny wpływu niepewności geologicznej na optymalne planowanie robót górniczych i produkcji. Ryzyko odnośnie do niepewności jakości złoża jest kwantyfikowane przez możliwość uzyskania oczekiwanej wartości bieżącej netto (NPV). Wyniki wskazują, że model optymalizacji ma zdolność do tworzenia optymalnego rozwiązania w warunkach niepewności.
On the 31st March 2017, the mining of hard coal in the last active mine in the Ostrava part of Ostrava-Karviná Coalfield was completed according to plan. Based on the decision of management of the company OKD, a.s. concerning the closure of the Paskov Mine, a plan of gradual closure of individual ventilation areas of the mine was prepared. Currently, the Paskov Mine is, from the point of view of mining legislation, in the stage of treatment and, in accordance with this plan, operations connected with the closure of individual areas are being performed. The decommissioning of main mine workings can be commenced after obtaining a necessary permit from the District Mining Authority for the area of the Moravian-Silesian and the Olomouc Region. In the article, information on the current process of closing of ventilation areas of the Paskov Mine and the expected subsequent process of mine closure is summarised.
PL
W dniu 31 marca 2017 r. wydobycie węgla kamiennego w ostatniej czynnej kopalni w Ostrawskiej części Zagłębia Ostrawsko- -Karwińskiego zakończono zgodnie z planem. Na podstawie decyzji zarządu firmy OKD, a.s. w sprawie zamknięcia Kopalni Paskov przygotowano plan stopniowego zamykania poszczególnych obszarów wentylacyjnych kopalni. Obecnie Kopalnia Paskov jest z punktu widzenia przepisów górniczych na etapie likwidacji i zgodnie z tym planem prowadzone są działania związane z zamknięciem poszczególnych obszarów. Likwidacja głównych wyrobisk górniczych może zostać rozpoczęta po uzyskaniu niezbędnego zezwolenia od Powiatowego Urzędu Górniczego na obszar województwa morawsko-śląskiego i ołomunieckiego. W artykule podsumowano informacje na temat aktualnego procesu zamykania obszarów wentylacyjnych kopalni Paskov oraz oczekiwanego późniejszego procesu zamykania kopalni.
Příspěvek řeší redukci větrní sítě a tím úsporu elektrické energie v souvislosti s odstavením hlavního ventilátoru na lokalitě Sviadnov, Dolu Paskov na základě přesunu hornické činnosti do důlních polí Staříč a Chlebovice, Dolu Paskov, OKD, a.s.
EN
The article deals with the reduction of the mine ventilation network, thereby saving electricity in connection with the shutdown of the main fan at the locality Sviadnov,the Paskov mine based on moving mining activities to the takes of a pit Staříč and Chlebovice, the Paskov Mine, OKD, a.s. (Ostrava-Karviná Mines).
Risks of fire occurrence in underground mines are known for a long time. Evacuation and rescue plans allow to each underground mine to respond and establish control in case of emergency. The primary goal of this paper is to determine the optimal system for evacuation in case of fire in underground mines and through a process of computer simulation to be presented to all workers that are affected by this issue. In this study is developed a system that allows by using available software to work out the complete evacuation plans that include analysis of fire scenarios and optimal routes for evacuation. With development of database of fire scenarios, it is possible to plan routes for evacuation in all situations. This presented methodology can serve to make effective system for evacuation and rescue in case of fire and to help save lives and protect the financial investment in the mine. This methodology represents the most economical option of making an effective system for evacuation and also can serve as an idea of making a software package that includes all the steps of making a system for evacuation and rescue in case of fire in underground mines. This presented model will have increased accuracy compared to other models presented so far, because of the prepared 3D model of the underground mine which includes the actual dimensions of the mine along with its associated elements from which the fire dynamics and system for evacuation depends.
Methodology for long-term underground lead-zinc mine planning based on fuzzy inventory theory is presented in this paper. We developed a fuzzy stochastic model of inventory control problem for planning lead-zinc ore production under uncertainty. The final purpose of this article is to find the optimal quantity of mined ore that should be stockpiled, in order to enable “feeding” of mineral processing plant in casus when the production in underground mine is interrupted, by using Possibilistic mean value of fuzzy number for defuzzing the fuzzy total annual inventory costs, and by using Extension of the Lagrangian method for solving inequality constrain problem. The different types of costs involved in mined ore inventory problems affect the efficiency of production scheduling. Dynamic nature of lead and zinc metal price is described by Ornstein-Uhlenbeck stochastic mean reverting process. The model is illustrated with a numerical example.
PL
W pracy przedstawiono metodologię długoterminowego wydobycia cynku i ołowiu w kopalniach podziemnych z wykorzystaniem podejścia stochastycznego z elementami logiki rozmytej do określania wymaganego poziomu zapasów. Opracowaliśmy model stochastyczny z wykorzystaniem elementów logiki rozmytej do kontroli zapasów w planowaniu wydobycia cynku i ołowiu w warunkach niepewności. Celem końcowym pracy jest określenie optymalnej ilości wydobywanej rudy, którą należy zachować jako zapas tak aby zapewnić odpowiednie jej dostawy do zakładu przeróbczego nawet w przypadku przerwania wydobycia w kopalni podziemnej, opierając się na posybilistycznej wartości średniej liczby rozmytej i wyostrzeniu całkowitych rocznych kosztów zapasów. Wykorzystano także rozszerzenie metody Lagrange’a do rozwiązywania problemu więzów w nierówności. Różnorakie koszty związane ze składowaniem zapasów wydobywanej rudy mają wpływ na wydajność planowanej produkcji. Dynamiczne zmiany cen cynku i ołowiu zostały określone z wykorzystaniem rewersji średniej stochastycznej, w pracy Ornsteina-Uhlenbecka. Zaprezentowano przykład numeryczny jako ilustrację modelu.
17
Dostęp do pełnego tekstu na zewnętrznej witrynie WWW
W artykule opisano główne problemy związane z rozruchem ścianowych przenośników zgrzebłowych w kopalniach podziemnych. Przedstawiono obecnie stosowane metody łagodzenia negatywnych aspektów rozruchu napędu, zarówno na drodze mechanicznej, jak i elektrycznej. Opisano najczęściej stosowane urządzenia rozruchowe, takie jak napędy dwubiegowe, sprzęgła hydrokinetyczne, napędy CST, rozruszniki stycznikowe, agregaty tyrystorowe i przemienniki częstotliwości.
EN
The paper describes the main problems connected with starting-up of long wall scraper conveyors in underground mines. Currently used methods of decreasing drive starting negative aspects were presented, both on the mechanical and electrical way. Most common used starting devices were presented, such as two-speed drives, fluid coupling, contractor starters, thyristor power units and frequency inverters.
Purpose: The purpose of the paper was to develop a method of methane risk assessment in order to fulfil the technical-organizational and legal requirements for occupational risk assessment in mines. Methane hazard and associated risks of the effects of ignition and/or explosion of methane is one of the most severe natural hazards. Methods: Heuristic methodology based on the Delphi approach and a group survey by a panel of experts, which was named SOPE, was used to assess the magnitude of methane risk. The adopted tools for assessing the current state of methane risk factors and their possible accident consequences were targeted surveys, with the participation of experts representing, mainly, engineering-technical personnel of mine ventilation service. The objectivity and independence of the judgment of the ex-perts was checked by determining indicators of the degree of the experts’ unanimity, indicators of their competence as well as indicators of the validity of their evaluations. The subject matter of the study of methane hazard were five longwall are-as of the "A-Z" twin-mine (after the merge of two mines: Mine A and Mine Z), three longwalls operated towards plant A and two longwalls operated towards plant Z. For the assessment of each area of the mine, a Methane Risk Assessment Questionnaire consisting of 4 assessment cards, was used. The cards included four areas of the studied risk factors, i.e. factors shaping the methane hazard (17 factors), the activity of the methane ignition initiators (19 factors), detection and prevention of methane risk (16 factors) and possible human and material losses (13 factors). Results: The evaluation of 65 factors affecting the causes and consequences of the methane risk in the exploitation area under ana-lysis, was conducted in accordance with the procedure of the adopted method, based on the proposed algorithm. Assess-ments by experts were used to calculate the indicators of the magnitude of methane hazard for each group of factors sepa-rately. Practical implications: A practical example of the application of this method is incorporated in chapter four of this paper, which also discusses the results of the conducted research. Originality/ value: The obtained values of the indicators of methane risk assessment and analysis of their changes showed that the proposed method can be an important element in the design and construction of a modern methane safety system in coal mines. It provides the possibility of controlling this risk and enables the minimization of its consequences in accordance with the criteria of their acceptance, adopted in this paper. The method does not replace the currently used methods of methane risk assessment, but complements them in a significant and modern way.
W artykule scharakteryzowano system klimatyzacji centralnej kopalń podziemnych. Przedstawiono przykłady instalacji chłodniczych z wykorzystaniem wysokociśnieniowego wymiennika ciepła oraz reduktora ciśnienia hydrostatycznego. Omówiono sposób regulacji i monitoringu rozpływu wody lodowej w tych instalacjach oraz scharakteryzowano zasady sterowania parametrami wody lodowej.
W celu zapewnienia stabilnej pracy kopalni oraz wysokiego poziomu wydobycia stosuje się maszyny do rozdrabniania węgla już w fazie jego transportu ze ściany wydobywczej do szybu lub sztolni transportowej. Maszynami tymi są tak zwane kruszarki ścianowe i podścianowe. Zadaniem tych kruszarek jest odpowiednie rozdrobnienie zbyt dużych brył węgla, które utrudniłyby lub uniemożliwiły transport urobku. W artykule podano przykłady rozwiązań konstrukcyjnych tego rodzaju kruszarek, tj. kruszarek walcowych oraz szczękowych. Najczęstsze zastosowanie znalazły kruszarki walcowe, wśród których występuje szereg rozwiązań konstrukcyjnych różniących się budową organu roboczego - walca, w szczególności zastosowanych w nim elementów rozdrabniających. Elementami roboczymi są najczęściej segmenty kruszące oraz noże styczno-obrotowe. Kruszarki te budowane są z różnymi wariantami napędu walca. Zamieszczono również oryginalne rozwiązanie kruszarki szczękowej z napędem obu szczęk usytuowanych nad przenośnikiem zgrzebłowym, przy czym kierunek przemieszczania się rozdrabnianego węgla w kruszarce jest zgodny z kierunkiem ruchu przenośnika.
EN
In order to provide stable operation of a mine and high level of output, there are applied nnachines for coal disintegration already at the stage of its transportation from the mined wall to a shaft or transport drift. The machines are so called wall and longwall crushers. Their task is proper size reduction of too large coal lumps that could make the output transport more difficult or even impossible. The work presents examples of constructional solutions of such crushers i.e. roll and jaw crushers. The jaw crushers are the most commonly applied and they feature several constructional solutions with different construction of the working unit-the roll, and especially grinding elements mounted in it. The working elements are most frequently the crushing sections and rotary-tangent tools. The crushers are built with different versions of the roll drive. An original solution of a jaw crusher with a drive of both jaws located over the push plate conveyor is also presented. The direction of the ground coal movement is compatible with the direction of the movement of conveyor.
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.